When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- Universal AC input/ Full range .
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- 100% full load burn-in test
- Fixed switching frequency at 77KHz
-2 years warranty
Output
-DC voltage :5V
-Rated current :12V
-Current range:0 ~ 12A
-Rated power :60W
-Ripple and noise(max.) Note.2 :120mVp-p
-Voltage Adj. Range:4.75 ~ 5.5V
-Voltage Tolerance Note.3:± 2.0%
-Line regulation :±0.5%
-Load regulation:±1.0%
-Setup, Rise Time :300ms, 50ms/230VAC 800ms, 50ms/115VAC at full load
-Hold up Time (Typ.) :80ms/230VAC 12ms/115VAC at full load
Input
-Voltage range (Note 5.) :85 ~ 264VAC 120 ~ 370VDC
-Frequency range :47 ~ 63Hz
-Efficiency(Typ.) :73%
-Ac current (Typ.) :2A/115VAC 1A/230VAC
- Inrush Current (Typ.):COLD START 20A/115VAC 40A/230VAC
-Leakage Current :<3.5mA / 240VAC
Protection
Overload:105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
Over voltage :5.75 ~ 6.75V
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
Environment
Working Temp.:-10 ~ +60 (Refer to output load derating curve)
working humidity:20 ~ 90% RH non-condensing
Storage Temp., Humidity:-20 ~ +85 , 10 ~ 95% RH
Temp. Coefficient :±0.03%/ (0 ~ 50 )
vibration:10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Safety and EMC (note 4 )
Safety Standards :UL1012, UL60950-1, TUV EN60950-1 approved
Withstand voltage :I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation resistance :I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI conduction and radiation:Compliance to EN55022 (CISPR22) Class B
Harmonic Current :Compliance to EN61000-3-2,-3
EMS immunity :Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
Others
MTBF :316.2K hrs min. MIL-HDBK-217F (25 )
packing:0.51Kg; 24pcs/13.1Kg/0.7CUFT
Note
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives
Mean Well RSP-1500-12 AC to DC Power Supply Single Output 12 Volt 125 Amp 1.5kw
$438.90
Mean Well GP50A14E-R1B AC/DC DESKTOP ADPT 5V +/-15V 50W
$58.73
MEAN WELL S-60-5 Switching Power Supply Output 5Volts, 12Amps
$145.00
Documentation