Premium NTSC Cable TV Tuner Box With 2 TV Channels Simultaneously Displaying for Sale

Premium NTSC Cable TV Tuner Box With 2 TV Channels Simultaneously Displaying For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Premium NTSC Cable TV Tuner Box With 2 TV Channels Simultaneously Displaying :
$148.00

Analog Dual TV Tuner With Picture-In-Picture SupportAnalog Dual Cable TV Tuner With PIP Split-Screen Output
This dual TV tuner box has 2 TV tuners built inside. Its design allows users to watch 2TV channelsat the same time on one TVscreen for entertainment, monitoring, presentation or recording purpose.

The 2nd TV channel window is inserted onto the mainTV channel screen in real time as the picture-in-picture presentation.

Its Picture-In-Picture split screen style and PIPvideo window position can be controlled by its IR remote or front panel push buttons.

This RF demodulator TV tunersupports all the coax type A/V signal inputs from:

cable outlet for analog CATV or MATV system
RF type TV output from cable box, satellite receiver, or other set top boxes with TV/RF out ports
UHF/VHF channel broadcast or closed-circuit distribution
Modulated CCTV surveillance system
Cable radio or cable FM station
RF modulators

Full-Frequency Demodulator For CATV SatelliteDecoding
This dual-channel TV tuner has a full-frequency NTSC TV tuner. It can decodeall UHF/VHF TV, CATV channels from RF modulator, cable outlet, cable box, settop box with RF TV out.

Supports all standardanalog cable TV channels from CH1 to CH139 or aerial VHF/UHF channels from CH2to CH83.

The coax RF demodulator can also decode those TV2output from satellite receivers like DirecTV, Dish Network or all othersatellite set top boxes.

Dual-Channel Frame Synchronizer
2 TV channels will be decoded and displayed simultaneouslyon TV screen with smooth and sharp pictures.

A fast TV window swap button is provided forfast switching between main TV channel screen and PIP screen

2-Channel Split Screen Display
2 TV channels can be displayed in different screen modes as follows:

Single-channel full screen
PIP window screen on upper-left/right or lower-left/right corner.
Horizontal-split screen with top/bottom video windows
Vertical-split screen with left/right video windows
Picture-by-picture or quad screen

Fast Swap Between Main/PIP Channel
Main channel screen and the 2nd TV window can be exchanged instantly by pressing theswap button on the front or IR remote.

Easy Add-On TV Tuner Module
This RF coax demodulator can be an external TV tuner module for those video monitors with no RF coax inputs.

It is also a great TV tunermodule for projectors, DVR systems or all other video equipments that do not have RF coaxinputs.

RF Demodulator For PrivateMATV System Use
This dual TV tuner can also serve as RF coax demodulator for decoding thoseRF outputs from cable box, satellite receiver or surveillance DVR.

Customers can also use multipleRF modulators for converting each individual video outputs from multiplel videoequipments into multiple private TV channels and combine them into one coaxcable run for further distribution between TVs and demodulated by this device.

Last Memory
This TV tuner will memorize users' currentselection in the system bufferonce adjusted.

Thelast-minute PIP screen modeand TV channels will be displayed right away in the same configuration after power cycling or power outage.

IR Remote Control
This external TV tuner can be fully operated and controlled via remotecontroller or push buttons on the front panel.

Add/Delete TV Channels
Users can use the IR remote to program/remove the unwantedTV channels from the reception. The deleted channel will be skipped whenflipping channel up/down button and can always be added back if needed.

Premium dual TV tuner with split-screen output so users can watch 2 analog TV channels at the same time.
Professional RF coax to RCA video demodulator for NSTC RF coax signals coming from cable outlets or cable boxes/satellite receivers with TV out or modulated surveillance systems.
Watch single TV channel or 2 TV channels at the same time on one TV.
2 TV channels can be presented on TV screen in different split screen modes.
Fast TV channel swap between main TV channel and the PIP channel via IR remote or manual push button.
Featured with dual-channel frame synchronizer for smooth video output with sharp and clear picture quality.
The current screen mode and TV channel will be memorized after the power-off.
Full CATV channel frequency support for CH2 to CH139 (48.25 to 883.25MHz) for NTSC system.
Full aerial VHF/UHF channel support for CH2 to CH83 (471.25 MHz to 885.25 MHz)
Great MATV setup solution for all public A/V broadcast, SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants.
Easy RF input replacement solution for those TVs with broken coax inputs.
External TV tuner add-on module for video monitors, projectors or DVR systems without RF inputs.
Easy operation via IR remote or push buttons on the front panel.
Perfect for existing modulated camera channels and works with quad video processors, multiplexers, and DVR's.
Supports last channel memory after power-off or power outage. This coax video demodulator will stay tuned to the last TV channel after being powered off manually or power outage event.
This RF demodulator can also be combined with RF modulator for use as a video/audio over coax cable extender kitfor many purposes such as CCTV surveillance, multimedia center, etc.

Channel Display: Digital LED Screen
TV System Support: NTSC
Channel Frequency Range:
- CATV: CH1 to CH139 (48.25 to 883.25MHz)
- Air UHF/VHF: CH2 to CH83 (471.25 MHz to 885.25 MHz)
RF Input Level: -5 to +30 dbmv
RF Input Connector: F-Type male x 1
Video Output Connector: RCA-Type x 1, 1.0Vp-p composite 75 ohms
Audio Output Connectors: RCA-Type x 2
Video Refresh Rate: NTSC 60 fields/sec or PAL 50 fields/sec
Video Output Resolution:
- NTSC:720×480 pixels
- PAL:720×576 pixels
Noise Level: 10db (max)
Channel/Volume Operation: By IR remote control or push buttons on the front panel
Operating Temperature: 0 to 40 degrees C
Power Supply: AC 110V-240V with DC 12V 800mA, Center Positive

Dual TV tuner unit
IR remote
Power adapter
User manual

Recent Threads

Premium NTSC Cable TV Tuner Box With 2 TV Channels Simultaneously Displaying For Sale

Premium NTSC Cable TV Tuner Box With 2 TV Channels Simultaneously Displaying : $148.00

Premium NTSC Cable TV Tuner Box With 2 TV Channels Simultaneously Displaying :
$148.00