Raspberry Pi SIM7600A-H 4G HAT Supports LTE Cat-4 4G/3G GNSS for North America For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Raspberry Pi SIM7600A-H 4G HAT Supports LTE Cat-4 4G/3G GNSS for North America:
$73.14
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.SIM7600A-H 4G HAT For Raspberry Pi, LTE Cat-4 4G / 3G Support, GNSS Positioning, For North America4G HATFOR RASPBERRY PI
Enabling LTE Cat-4 4G / 3G Communication & GNSS Positioning
Based on SIM7600A-H
Features At A Glance
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Onboard CP2102 USB to UART converter, for serial debugging
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot, supports 1.8V/3V SIM card
- TF card slot is NOT soldered for this variant
- Onboard audio jack and audio decoder for making telephone call
- 2x LED indicators, easy to monitor the operating status
- Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
- Baudrate: 300bps ~ 4Mbps (default: 115200bps)
- Autobauding baudrate: 9600bps ~ 115200bps
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- Comes with development resources and manual (examples for Raspberry Pi/Jetson BANDLTE Cat-4LTE-FDD: B2/B4/B123GUMTS/HSPA+: B2/B52GN/AGNSSSatellite type16-channelC/A CodeSensitivity-159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou)Cold starts: -148 dBmTime-To-First-Fix (open air)Cold starts: <35sHot starts: <1sSMS AND AUDIOSMSSupported types: MT, MO, CB, Text, PDUStorage: USIM card and ME (default)Audio featureSupports echo cancellationSupports noise reductionOTHERPower supply5VOperating voltage5V / 3.3V (configured via jumper)Operating temperature-30°C ~ 80°CStorage temperature-45°C ~ 90°CDimensions56.21mm × 65.15mmStandard Raspberry Pi 40PIN GPIO
Compatible With Raspberry Pi Series Boards, Jetson Nano
Dial-Up On Windows/LinuxLTE Cat-4:Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink) *
3G (HSPA+):Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) *
* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.
Cloud CommunicationSupports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPS
GNSS PositioningSupports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS Base Station Positioning
Telephone Call & SMS SupportMaking Telephone Call Or Sending SMS By AT Commands, With Onboard Audio Jack
What's On Board- SIM7600A-H
- CP2102 USB to UART converter
- NAU8810 audio decoder
- TXS0108EPWR voltage translator
translates 3.3V/5V into 1.8V - MP2128DT power chip
- MP1482 power chip
- Raspberry Pi GPIO header
- SIM7600 control interface
for connecting with host boards like Arduino/STM32 - SIM card slot
supports 1.8V/3V SIM card - 3.5mm earphone/mic jack
- USB interface
for testing AT Commands, getting GPS positioning data, etc. - USB to UART interface
for serial debugging, or login to Raspberry Pi
- MAIN antenna connector
- AUX antenna connector
- GNSS antenna connector
- Power switch
- Network status indicator
- Power indicator
- Operating voltage selection jumper
configured via 0Ω resistor jumper
VCCIO-3.3V: set operating voltage as 3.3V
VCCIO-5V: set operating voltage as 5V - UART selection jumper
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART - PWR configuration jumper
PWR - 3V3: auto startup on power-up (default)
PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
Flight mode configuration jumper
NC by default, no flight mode control pin
Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin - USB connector solder pads
- BOOT forced programming solder pads
Pinout DefinitionOutline DimensionsDevelopment Resources - SIM7600A-H 4G HAT x1
- LTE Antenna x1
- GPS External Antenna (B)x1
- USB type A plug to micro plug cable x2
- RPi screws pack (2pcs) x1
12345
Related Items:
Raspberry PI 5 NAS Case Boot from SSD with Cooling Fan Heatsink USB 3.0 Cable
$34.95
Raspberry Pi Camera Mini Size With Long FPC 5MP OV5647 for Pi A+/B+/2B/3B/3B+/4B
$33.24
Raspberry Pi 8-ch Relay Expansion Board for Controlling High Voltage Products
$29.44