HP 465714-001 StorageWorks 8/20Q Fibre Channel Switch 8GB 16-Active Port For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
HP 465714-001 StorageWorks 8/20Q Fibre Channel Switch 8GB 16-Active Port :
$420.00
GreenTekSolutions Listing Template - Home
- About Us
- Payment
- Shipping
- Returns
- response
- Contact Us
- Welcome to GreenTekSolutions-B
- Add to Favorites
- HP (31)
- Networking (40)
- Processors (1)
- Dell (14)
- Laptops (4)
- Servers (18)
- Apple (3)
- IBM (3)
- Memory Ram (1)
- Switch (38)
- Hard Drive (10)
- Cisco (40)
- Access Point (1)
- Nortel (2)
- Avaya (1)
- Telecom (9)
- Juniper (2)
- Firewall (6)
- KVM (1)
- Tape Drive (2)
- LTO-4 (1)
- Brocade (6)
- Netapp (2)
- EMC (5)
- Other (66)
The BEST in Buyback Programs!
GreenTek Solutions LLC
Call us today for more information.
Our Hassle-free buyback program offers:
- Free evaluation of your I.T equipment!
- Purchase of I.T equipment in its current condition!
- Shipping or pick-up is on us!
- Free recycling of out of date equipment!
Item Description
This item is in used but good working condition. It was pulled from a working environment. Since this item is in used condition, it is possible that it can show some normal signs of wear, for example: scratches or scuffs but nothing that will affect performance.
We offer a 30 day satisfaction guaranteed warranty on all the items listed in our store. If for some reason you\'re not happy with your purchase, please don\'t hesitate to contact us and we will try our best to fix it.
Included Items
1x HP 465714-001 Fibre Channel Switch
20x HP 8GB SFP\'s
1x Power Cord
1x Rails (NO HARDWARE)
Tech Specs
Boot Output
INIT: Switching to runlevel: 6
Stopping fcswitch: [ OK ]
Stopping xinetd: [ OK ]
Saving random seed: [ OK ]
Starting killall: [ OK ]
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Unmounting file systems:
Please stand by while rebooting the system...
On the next boot fsck will be skipped.
Restarting system.
Validating SPD SEEPROM checksum...Passed
BIST memory configured for 0x20000000 (536870912) bytes
U-Boot 1.1.2 Revision 1.12.5.107
(Mar 28 2011 - 18:13:03)
IBM PowerPC 440 EP Rev. C
Board: QLogic Stingray (0x31) Board
VCO: 792 MHz
CPU: 396 MHz
PLB: 132 MHz
OPB: 66 MHz
EPB: 66 MHz
I2C: ready
DRAM: 512 MB
Initializing ECC Relocation information:
Stack = 0x1DF3FF08
Initialize data pointer = 0x1DF3FF2C
Uboot relocation address in RAM = 0x1FF44000
NOR FLASH: (0x0001:0x0049) (AMD:29LV160B) 2 MB
Using default environment
board_init_r: ethaddr = 00:C0:DD:28:89:03
PCI: Bus Dev VenId DevId Class Int
00 12 1077 2e02 0280 1b
In: serial
Out: serial
Err: serial
KGDB: kgdb ready
ready
NAND: 256 MB (fast non-cache, 0xec 0xda 0x10 0x95 0x44)
Net: ppc_440x_eth0
Mounting YAFFS image partition: done
BEDBUG:ready
### BOOTFS booting: kernel=kernel.0 root=ramdisk.0 args=\"ramdisk=71440\"
### BOOTFS loading \'kernel.0\' to 0x4000000
### BOOTFS loading \'ramdisk.0\' to 0x413a000
helper entry, hp @ 0x0x4000000, data @ 0x0x400025c, magic num 0x27051956
## Booting image at 04000000 ...
Image Name: Linux-2.6.22-arrowhead-1.1-030
Created: 2011-03-31 20:36:47 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1276019 Bytes = 1.2 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 0413a000 ...
Image Name: Amazon RAMDisk
Created: 2011-12-16 22:50:57 UTC
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 22735230 Bytes = 21.7 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 1c990000, end 1df3e97e ... OK
Linux version 2.6.22-arrowhead-1.1-030 (builds@eplnxbld01) (gcc version 4.1.2) #1 Thu Mar 31 15:36:39 CDT 2011
QLogic Arrowhead board
Zone PFN ranges:
DMA 0 -> 131072
Normal 131072 -> 131072
early_node_map[1] active PFN ranges
0: 0 -> 131072
Built 1 zonelists. Total pages: 130048
Kernel command line: root=/dev/ram ramdisk=71440 nand_single=0 nand_multi=0 ql_bootimage=0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 382464k available (1944k kernel code, 612k data, 152k init, 0k highmem)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
vDSO setup failure, not enabled !
PCI: Probing PCI hardware
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
yaffs Mar 31 2011 15:32:50 Installing.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 0) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 71440K size 1024 blocksize
loop: module loaded
PPC 4xx OCP EMAC driver, version 3.54
mal0: initialized, 4 TX channels, 2 RX channels
zmii0: bridge in RMII mode
eth0: emac0, MAC 00:c0:dd:28:89:03
eth0: found Micrel KS8001 PHY (0x01)
emac1: can\'t find PHY!
Amazon Boot Flash: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program.
4 cmdlinepart partitions found on MTD device NOR
Creating 4 MTD partitions on \"Amazon Boot Flash\":
0x00000000-0x00080000 : \"environment\"
0x00080000-0x00100000 : \"uboot1\"
0x00100000-0x00180000 : \"uboot2\"
0x00180000-0x00200000 : \"boot\"
NAND bursting enabled
NAND Flash write enabled
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock count: 5
2 cmdlinepart partitions found on MTD device NAND
Creating 2 MTD partitions on \"NAND 256MiB 3,3V 8-bit\":
0x00000000-0x0a000000 : \"image\"
0x0a000000-0x10000000 : \"config\"
i2c /dev entries driver
IBM IIC driver v2.1
ibm-iic0: using standard (100 kHz) mode
ibm-iic1: using standard (100 kHz) mode
i2c-adapter i2c-0: found DS1780 revision 1
hwmon-vid: Unknown VRM version of your CPU
adm9240 0-002c: Using VRM: 0.0
adm9240 0-002c: cold start: config was 0x08 mode 1
i2c-adapter i2c-0: found DS1780 revision 1
hwmon-vid: Unknown VRM version of your CPU
adm9240 0-002d: Using VRM: 0.0
adm9240 0-002d: cold start: config was 0x08 mode 1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 152k init
INIT: version 2.78 booting
Welcome to Firmware V8.0.14.3.0
Boot Date/Time: Tue Oct 2 21:34:06 UTC 2018
Mounting proc filesystem: [ OK ]
Configuring kernel parameters: [ OK ]
Setting hostname switch: [ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
INIT: Entering runlevel: 3
Initializing random number generator: [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting fcswitch: [ OK ]
Firmware V8.0.14.3.0
switch login: admin
Password:
Establishing connection... Please wait.
* *
* Command Line Interface SHell (CLISH) *
* *
SystemDescription HP StorageWorks 8/20q Fibre Channel Switch
HostName
EthIPv4NetworkAddr 10.0.0.1
EthIPv6NetworkAddr
MACAddress 00:c0:dd:28:89:03
WorldWideName 10:00:00:c0:dd:28:89:03
SerialNumber
SymbolicName 8/20q FC Switch
ActiveSWVersion V8.0.14.3.0
ActiveTimestamp Fri Dec 16 22:50:58 2011
POSTStatus Passed
LicensedPorts 16
SwitchMode Full Fabric
This switch supports a dual-stacked IPv4 and IPv6 network connection.
Use the \'set setup system\' command to change the network settings.
Either IPv4 or IPv6 can be disabled, otherwise the switch will run in
dual-stack mode.
[1][Tue Oct 02 21:34:21.526 UTC 2018][A][3008.0000][A \'remake filesystem\' was performed from PROM mode. You must perform a \'config re
store\' to clear this error.]
Warning: Your user account password has not been changed
It is strongly recommended that you do so before proceeding
8/20q FC Switch #> 8/20q FC Switch #>
show version
* *
* Command Line Interface SHell (CLISH) *
* *
SystemDescription HP StorageWorks 8/20q Fibre Channel Switch
HostName
EthIPv4NetworkAddr 10.0.0.1
EthIPv6NetworkAddr
MACAddress 00:c0:dd:28:89:03
WorldWideName 10:00:00:c0:dd:28:89:03
SerialNumber
SymbolicName 8/20q FC Switch
ActiveSWVersion V8.0.14.3.0
ActiveTimestamp Fri Dec 16 22:50:58 2011
POSTStatus Passed
LicensedPorts 16
SwitchMode Full Fabric
This switch supports a dual-stacked IPv4 and IPv6 network connection.
Use the \'set setup system\' command to change the network settings.
Either IPv4 or IPv6 can be disabled, otherwise the switch will run in
dual-stack mode.
8/20q FC Switch (admin) #> show env
Temperature(C) Sensors:
Sensor Description Status Current High Warn High Alarm
------ ----------- ------ ------- --------- ----------
0 BOARD Normal 20 65 70
1 DS1780 Normal 21 n/a n/a
2 MAX1617 Normal 18 65 70
3 ASIC Normal 44 95 100
Voltage Sensors:
Sensor Description Status Current Low Alarm High Alarm
------ ----------- ------ ------- --------- ----------
0 2.5V Good 2.50 2.20 2.80
1 1.25V Good 1.24 1.00 1.50
2 3.3V Good 3.30 3.02 3.58
3 12V Good 11.94 10.00 13.31
4 1.2V Good 1.19 1.04 1.38
5 1.5V Good 1.48 1.31 1.68
6 1.8V_ANALOG Good 1.78 1.58 2.02
7 1.8V Good 1.79 1.60 1.99
8 2.5V_ANALOG Good 2.40 2.08 2.84
- PAYMENT
- SHIPPING
- RETURNS
- TERMS
- GUARANTEE
- ABOUT US
- PAYMENT PAYMENT
- SHIPPING SHIPPING
- RETURNS RETURNS
- TERMS TERMS
- GUARANTEE GUARANTEE
- ABOUT US ABOUT US
• Only PayPal and major credit cards are accepted. (Amex, Visa, MasterCard)
• Immediate Payment is required after the Winning offer
• Item will be shipped immediately on the same or next business day of receiving full payment
• Shipping within the 48 Contiguous United States is Free
• International buyers are welcome.
• Alaska, Hawaii and Puerto Rican buyers have to contact me for a shipping quote prior offerding.
• P.O. Box Delivery is offered but is possible that there can be shipping charges.
• APO/FPO Delivery is offered but is possible that there can be shipping charges.
• PayPal Confirmed Addresses Only
• Items Will be Shipped by USPS or FedEx on the Same or Next Business day of receiving full payment
• UPS or FedEx Tracking Number will be provided
\"AS-IS\" items have no warranty and do not qualify for refunds or exchanges. Refunds are only provided if a suitable replacement is not available. The buyer must notify GreenTek Solutions in writing (e-mails qualify) of any problem within the documented warranty period to qualify for refund or replacement. GreenTek Solutions is not obligated to offer warranty services beyond the stated warranty period. Return Authorization (RMA) is required for defective product returns. Credit for returned item will be issued after the return of the defective product.
Upon receipt of Return Authorization, the buyer has 3 Business Days to ship item to us and provide tracking number via e-mail. GreenTek Solutions does not issue refunds for any form of shipping, either to or from the buyer. Items that are damaged while in the buyer\'s possession, regardless of circumstances, do not qualify for a refund or exchange. In addition, items damaged by improper packaging when returned to GreenTek Solutions will not qualify for refund or exchange.
Items with Warranty: We affix \"warranty labels\" on all items that have a warranty. Evedince of tampering, removal or broken seal, will VOID the warranty.
Texas buyers and local picked up customers at our office - GreenTek Solutions - will be charged 8.25% Sales Tax. Buyers are required to provide payment within 1 week from sale close, unless other arrangements are made. Late payments may result in order cancellation.
International sales over $1000 will only ship after payment has cleared. International sales over $1000 will only ship after payment has cleared.
PLEASE do not ask us to reduce the amount of the invoice for customs purposes, because we will not do it. We will only declare items purchased as a commercial sample, nothing else (gift, return, etc.).
All of our items work for servers, Not for desktop. Buyer may return defective Goods for replacement or refund (as elected by Seller) within 30 days of purchase. Subject to Seller\'s reasonable approval, Buyer may return for credit within 30 days of purchase non-defective Goods the sales price of which, together with the sales price of any other non-defective items previously returned to Seller by Buyer, do not exceed 2% of the aggregate sales prices of all non-defective products purchased by Buyer from Seller. Non-defective, special order products are normally not accepted for return; other returns are handled on a case-by-case basis in Seller\'s sole discretion. All returns must be accompanied by an authorized RMA number, which is valid for 15 days after the date of issuance, and returns of non-defective normally stocked items in resalable condition will be accepted for credit subject to a restocking charge of no less than 15% of the sales price.
A Return Material Authorization (RMA) number must be obtained for all returns. Please contact GreenTek Solutions RMA for assistance.
GreenTek Solutions entirely eliminates the risk associated with electronic recycling by managing the entire process from pick-up to final destination. We recover, re-market and recycle technology from companies from all sizes, large public retail, government entities and education institutions.
- HOME
- ABOUT US
- PAYMENT
- Shipping
- RETURN
- response
- CONTACT US
Read More PAYMENT OPTIONS © Copyright 2017, GreenTekSolutions-B All rights reserved. store Designed & Developed By
Related Items:
Warning: Invalid argument supplied for foreach() in /home/vscan/public_html/store/relateditems.php on line 72
Documentation
- AIX Local Security Checks
- Backdoors
- CentOS Local Security Checks
- CGI abuses
- CISCO
- Databases
- Debian Local Security Checks
- Default Unix Accounts
- Denial of Service
- Fedora Local Security Checks
- Finger abuses
- Firewalls
- FreeBSD Local Security Checks