When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Pre-owned, re-boxed.
Login: admin / Password: admin
Rack mount rail kit is not included, as pictured.
Removed from a working environment at the end of lease.
CISCO SWITCH Ver7.34
Device detected on 0:6:0 after 0 msecs
Device detected on 0:1:1 after 0 msecs
Device detected on 0:1:0 after 0 msecs
MCFrequency 1333Mhz
Relocated to memory
Time: 5/17/2019 14:46:30
Detected CISCO IOFPGA
NorthStar/Alpine Present
MP Card Present
MIFPGA Present
Code Signing Results: 0x0
Using Upgrade FPGA
Checking and setting PSU fan directions
Booting from Primary Bios
FPGA Revison : 0x14
FPGA ID : 0x1237305
FPGA Date : 0x20141016
Power Debug Register: 0x0
Reset Cause Register: 0x80000000
Boot Ctrl Register : 0xe0ff
FPGA Update Status : 0x20
Detected CISCO MPFPGA
FPGA Update Status : 0x20
Detected CISCO MIFPGA
Version 2.16.1240. Copyright (C) 2013 American Megatrends, Inc.
Board type 2
CISCO TOR
IOFPGA @ 0xc8000000
SLOT_ID @ 0xf
EOR chassis
check_bootmode: grub: Continue grub
Trying to read config file /boot/grub/menu.lst.local from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Booting bootflash:/nxos.7.0.3.I2.2a.bin ...
Booting bootflash:/nxos.7.0.3.I2.2a.bin
Trying diskboot
Filesystem type is ext2fs, partition type 0x83
Image valid
Image Signature verification was Successful.
Boot Time: 5/17/2019 14:47:2
INIT: version 2.88 booting
Loading IGB driver ...
Installing SSE module ... done
Creating the sse device node ... done
Loading I2C driver ...
Installing CCTRL driver for card_type 6 ...
1263589
mpa_card_type=: 1
Installing CCTRL driver for mpa_card_type 1 ...
Checking SSD firmware ...
Model Number: Micron_M550_MTFDDAT064MAY
Serial Number: MSA1841000D
Firmware Revision: MU01
Checking all filesystems.......
Installing default sprom values ...
done.Configuring network ...
Installing LC netdev ...
Installing veobc ...
Installing OBFL driver ...
..done Fri May 17 14:47:12 UTC 2019
tune2fs 1.42.1 (17-Feb-2012)
Setting reserved blocks percentage to 0% (0 blocks)
Starting portmap daemon...
creating NFS state directory: done
starting 8 nfsd kernel threads: done
starting mountd: done
starting statd: done
Saving image for img-sync ...
Loading system software
Installing local RPMS
Patch Repository Setup completed successfully
dealing with default shell..
file /proc/cmdline found, look for shell
unset shelltype, nothing to do..
user add file found..edit it
Uncompressing system image: Fri May 17 14:47:18 UTC 2019
blogger: nothing to do.
..done Fri May 17 14:47:18 UTC 2019
Unsquashing rootfs ...
Creating /dev/mcelog
Starting mcelog daemon
Overwriting dme stub lib
Replaced dme stub lib
INIT: Entering runlevel: 3
Running S93thirdparty-script...
Populating conf files for hybrid sysmgr ...
Starting hybrid sysmgr ...
2019 May 17 14:47:30 %$ VDC-1 %$ %PLATFORM-2-PS_OK: Power supply 1 ok (Serial n
umber DCB1828X0AT)
2019 May 17 14:47:30 %$ VDC-1 %$ %PLATFORM-2-PS_FANOK: Fan in Power supply 1 ok
2019 May 17 14:47:30 %$ VDC-1 %$ %PLATFORM-2-PS_OK: Power supply 2 ok (Serial n
umber DCB1828X0AS)
2019 May 17 14:47:30 %$ VDC-1 %$ %PLATFORM-2-PS_FANOK: Fan in Power supply 2 ok
2019 May 17 14:47:30 %$ VDC-1 %$ %PLATFORM-2-FANMOD_FAN_OK: Fan module 1 (Fan1(
sys_fan1) fan) ok
2019 May 17 14:47:30 %$ VDC-1 %$ %PLATFORM-2-FANMOD_FAN_OK: Fan module 2 (Fan2(
sys_fan2) fan) ok
2019 May 17 14:47:30 %$ VDC-1 %$ %PLATFORM-2-FANMOD_FAN_OK: Fan module 3 (Fan3(
sys_fan3) fan) ok
2019 May 17 14:47:30 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: <<%USBHSD-2-MOUNT>> logfl
ash: online - usbhsd
2019 May 17 14:47:32 %$ VDC-1 %$ May 17 14:47:32 %KERN-2-SYSTEM_MSG: [ 8.224
843] hwport mode=6 - kernel
2019 May 17 14:47:34 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: IP Netlink thread init suc
cessful - netstack
2019 May 17 14:47:52 %$ VDC-1 %$ %USER-0-SYSTEM_MSG: end of default policer - c
opp
2019 May 17 14:47:52 %$ VDC-1 %$ %COPP-2-COPP_NO_POLICY: Control-plane is unpro
tected.
2019 May 17 14:47:53 %$ VDC-1 %$ %CARDCLIENT-2-FPGA_BOOT_PRIMARY: IOFPGA booted
from Primary
2019 May 17 14:47:53 %$ VDC-1 %$ %CARDCLIENT-2-FPGA_BOOT_PRIMARY: MIFPGA booted
from Primary
2019 May 17 14:47:53 %$ VDC-1 %$ %CARDCLIENT-2-FPGA_BOOT_PRIMARY: GEM_MIFPGA bo
oted from Primary
2019 May 17 14:47:53 %$ VDC-1 %$ icmpv6: IPV6 Netlink thread init successful
2019 May 17 14:47:54 %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online
Waiting for system online status before starting POAP ...
Waiting for system online status before starting POAP ...
2019 May 17 14:48:38 switch %$ VDC-1 %$ %ASCII-CFG-2-CONF_CONTROL: System ready
Starting Auto Provisioning ...
Done
Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: 2019 May 17
14:48:44 switch %$ VDC-1 %$ %POAP-2-POAP_INITED: POAP process initialized
Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: yes
---- System Admin Account Setup ----
Do you want to enforce secure password standard (yes/no) [y]: no
Enter the password for \"admin\": admin
Confirm the password for \"admin\": admin
---- Basic System Configuration Dialog VDC: 1 ----
This setup utility will guide you through the basic configuration of
the system. Setup configures only enough connectivity for management
of the system.
Please register Cisco Nexus9000 Family devices promptly with your
supplier. Failure to register may affect response times for initial
service calls. Nexus9000 devices must be registered to receive
entitled support services.
Press Enter at anytime to skip a dialog. Use ctrl-c at anytime
to skip the remaining dialogs.
Would you like to enter the basic configuration dialog (yes/no): no
2019 May 17 14:49:49 switch %$ VDC-1 %$ %COPP-2-COPP_POLICY: Control-Plane is pr
otected with policy copp-system-p-policy-strict.
User Access Verification
switch login: admin
Password: admin
Cisco Nexus Operating System (NX-OS) Software
TAC support: xxxxxxxxxxxxxxxx
Copyright (C) 2002-2015, Cisco and/or its affiliates.
All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under their own
licenses, such as open source. This software is provided \"as is,\" and unless
otherwise stated, there is no warranty, express or implied, including but not
limited to warranties of merchantability and fitness for a particular purpose.
Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or
GNU General Public License (GPL) version 3.0 or the GNU
Lesser General Public License (LGPL) Version 2.1 or
Lesser General Public License (LGPL) Version 2.0.
A copy of each such license is available at
xxxxxxxxxxxxxxx
switch#
switch# sh ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: xxxxxxxxxxxxxxx
Copyright (C) 2002-2015, Cisco and/or its affiliates.
--More--
All rights reserved.
--More--
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under their own
licenses, such as open source. This software is provided \"as is,\" and unless
otherwise stated, there is no warranty, express or implied, including but not
limited to warranties of merchantability and fitness for a particular purpose.
--More--
Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or
GNU General Public License (GPL) version 3.0 or the GNU
Lesser General Public License (LGPL) Version 2.1 or
--More--
Lesser General Public License (LGPL) Version 2.0.
A copy of each such license is available at
xxxxxxxxxxxxxxxxxxx
Software
--More--
BIOS: version 07.34
NXOS: version 7.0(3)I2(2a)
BIOS compile time: 08/11/2015
NXOS image file is: bootflash:///nxos.7.0.3.I2.2a.bin
NXOS compile time: 12/14/2015 4:00:00 [12/14/2015 12:23:53]
Hardware
cisco Nexus9000 C9396PX Chassis
Intel(R) Core(TM) i3- CPU @ 2.50GHz with 16401956 kB of memory.
Processor Board ID SAL19017B6V
Device name: switch
bootflash: 51496280 kB
Kernel uptime is 0 day(s), 0 hour(s), 3 minute(s), 10 second(s)
Last reset
Reason: Unknown
System version: 7.0(3)I2(2a)
Service:
plugin
Core Plugin, Ethernet Plugin
Active Package(s):
switch# sh inventory
--More--
NAME: \"Chassis\", DESCR: \"Nexus9000 C9396PX Chassis\"
PID: N9K-C9396PX , VID: V02 , SN: SAL19017B6V
NAME: \"Slot 1\", DESCR: \"1/10G SFP+ Ethernet Module\"
PID: N9K-C9396PX , VID: V02 , SN: SAL19017B6V
NAME: \"Slot 2\", DESCR: \"40G Ethernet Expansion Module\"
PID: N9K-M12PQ , VID: V01 , SN: SAL185276PG
NAME: \"Power Supply 1\", DESCR: \"Nexus9000 C9396PX Chassis Power Supply\"
PID: N9K-PAC-650W , VID: V01 , SN: DCB1828X0AT
NAME: \"Power Supply 2\", DESCR: \"Nexus9000 C9396PX Chassis Power Supply\"
PID: N9K-PAC-650W , VID: V01 , SN: DCB1828X0AS
NAME: \"Fan 1\", DESCR: \"Nexus9000 C9396PX Chassis Fan Module\"
PID: N9K-C9300-FAN2 , VID: V01 , SN: N/A
NAME: \"Fan 2\", DESCR: \"Nexus9000 C9396PX Chassis Fan Module\"
PID: N9K-C9300-FAN2 , VID: V01 , SN: N/A
NAME: \"Fan 3\", DESCR: \"Nexus9000 C9396PX Chassis Fan Module\"
PID: N9K-C9300-FAN2 , VID: V01 , SN: N/A
switch#
Cisco Nexus 6000 Series 1100W Power Supply (Reverse airflow) N55-PAC-1100W-B
$23.99
1pcs For Cisco Nexus 7000 Switch Routing Fan N7K-C7010-FAN-F
$232.21
CISCO NXA-PAC-1100W-PE2 CISCO NEXUS 1100W AC PORT-SIDE EXHAUST (BLUE) POWER SUPP
$81.00
Documentation