When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Your Image Goes Here
Amiga Gotek V3.41 External Ivory & BIEGE + 0.96 OLED + Rotarywith DF1/ 23p Lead
FlashFloppy is Free and Open-Source Software.
All GOTEK drives are tested before despatch on my A1200
These drives are compatiable with A500, A600, A1200, A2000, A4000
Data ribbon cable and adapter to enable the plugging in for an external Gotek/ usb floppy disk emulator drive in the rear disk drive port of A500* / A500+ / A600 / A1200 / A2000 / A4000 Commodore Amiga computers.Power for your Gotek/OpenFlops drive is also provided by this cable and adapter.Great for adding an External USB Gotek/ floppy disk emulator drive to your Amiga as a second drive so you can backup your floppies or boot from USB (as it is external it is a nice non-destructive upgrade to your Amiga and means you can keep your original existing floppy disk drive too!)Works with Amiga 500 (see below note) / 500+ / 600 / 1200 / 2000 / 4000 etc using 23pin external Amiga Disk Drive port for power and data connection to drive. This means there is just a single neat ribbon cable with plug on the end.This cable "just works" plug and play on most Amiga models and you can hold down two mouse buttons at boot to choose the drive to boot from, except for Amiga 500... This does also works with Amiga 500 but you'll need aboot selector to convert SEL0 and SEL1signals to make your DF1 bootable. (Gotek Drive will be recognised as second Floppy Drive DF1 when connected to the Disk Drive port and will be recognised as DF2 or DF3 when it is connected to another external floppy drive.)Note: Booting directly from a Gotek/ external floppy with your Amiga will depend on the games or software used, some are hardcoded to only run from DF0:. This has been tested in Workbench too as a 2nd drive and shows up as DF1: / DF2: etc no problem. Also can be used with applications like X-copy to backup floppy disks to usb or vice versa!The package deal
1 Gotek USB Ivory/Biege Floppy Emulator with latest firmware installed.
2 With Amiga drivers and /ADFs Supplied on DVD
3 PrintedInstructionsand Guides.
4 DVD full of Amiga ADFs
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Amiga Gotek V3.41 External Ivory & BIEGE + 0.96 OLED + Rotarywith DF1/ 23p Lead
Ivory Gotek External G1010Biege 0.96 GotekFlash Floppy v3.41 /Oled Display White 0.96 + rotary factory fitted.H & C drivers on DVD two files in Amiga folder.Also inside flashfloppy V3.41 folderNew chip 435 larger memory. Faster response, better performance, ready for future updatesGenuine 23P lead for Disk Port DF1New Gotek modelAT32F435 435 ChipFlashFloppy is Free and Open-Source Software.
All GOTEK drives are tested before despatch on my A1200
These drives are compatiable with A500, A600, A1200, A2000, A4000
Data ribbon cable and adapter to enable the plugging in for an external Gotek/ usb floppy disk emulator drive in the rear disk drive port of A500* / A500+ / A600 / A1200 / A2000 / A4000 Commodore Amiga computers.Power for your Gotek/OpenFlops drive is also provided by this cable and adapter.Great for adding an External USB Gotek/ floppy disk emulator drive to your Amiga as a second drive so you can backup your floppies or boot from USB (as it is external it is a nice non-destructive upgrade to your Amiga and means you can keep your original existing floppy disk drive too!)Works with Amiga 500 (see below note) / 500+ / 600 / 1200 / 2000 / 4000 etc using 23pin external Amiga Disk Drive port for power and data connection to drive. This means there is just a single neat ribbon cable with plug on the end.This cable "just works" plug and play on most Amiga models and you can hold down two mouse buttons at boot to choose the drive to boot from, except for Amiga 500... This does also works with Amiga 500 but you'll need aboot selector to convert SEL0 and SEL1signals to make your DF1 bootable. (Gotek Drive will be recognised as second Floppy Drive DF1 when connected to the Disk Drive port and will be recognised as DF2 or DF3 when it is connected to another external floppy drive.)Note: Booting directly from a Gotek/ external floppy with your Amiga will depend on the games or software used, some are hardcoded to only run from DF0:. This has been tested in Workbench too as a 2nd drive and shows up as DF1: / DF2: etc no problem. Also can be used with applications like X-copy to backup floppy disks to usb or vice versa!The package deal
1 Gotek USB Ivory/Biege Floppy Emulator with latest firmware installed.
2 With Amiga drivers and /ADFs Supplied on DVD
3 PrintedInstructionsand Guides.
4 DVD full of Amiga ADFs
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
FlashFloppy is Free and Open-Source Software.
All GOTEK drives are tested before despatch on my A1200
These drives are compatiable with A500, A600, A1200, A2000, A4000
Data ribbon cable and adapter to enable the plugging in for an external Gotek/ usb floppy disk emulator drive in the rear disk drive port of A500* / A500+ / A600 / A1200 / A2000 / A4000 Commodore Amiga computers.Power for your Gotek/OpenFlops drive is also provided by this cable and adapter.Great for adding an External USB Gotek/ floppy disk emulator drive to your Amiga as a second drive so you can backup your floppies or boot from USB (as it is external it is a nice non-destructive upgrade to your Amiga and means you can keep your original existing floppy disk drive too!)Works with Amiga 500 (see below note) / 500+ / 600 / 1200 / 2000 / 4000 etc using 23pin external Amiga Disk Drive port for power and data connection to drive. This means there is just a single neat ribbon cable with plug on the end.This cable "just works" plug and play on most Amiga models and you can hold down two mouse buttons at boot to choose the drive to boot from, except for Amiga 500... This does also works with Amiga 500 but you'll need aboot selector to convert SEL0 and SEL1signals to make your DF1 bootable. (Gotek Drive will be recognised as second Floppy Drive DF1 when connected to the Disk Drive port and will be recognised as DF2 or DF3 when it is connected to another external floppy drive.)Note: Booting directly from a Gotek/ external floppy with your Amiga will depend on the games or software used, some are hardcoded to only run from DF0:. This has been tested in Workbench too as a 2nd drive and shows up as DF1: / DF2: etc no problem. Also can be used with applications like X-copy to backup floppy disks to usb or vice versa!The package deal
1 Gotek USB Ivory/Biege Floppy Emulator with latest firmware installed.
2 With Amiga drivers and /ADFs Supplied on DVD
3 PrintedInstructionsand Guides.
4 DVD full of Amiga ADFs
✫ New Set Commodore Amiga GOTEK Floppy Disk Emulator 3.5" external case
$165.00
Commodore Amiga 3.5" NEW external case with PC Floppy Drive and Gotek Emulator
$165.00
Documentation