Juniper Networks EX2200-C-12P-2G EX 2200 12-Port PoE+ L3 Switch w/ Rack Mounts For Sale

Juniper Networks EX2200-C-12P-2G EX 2200 12-Port PoE+ L3 Switch w/ Rack Mounts


This item has been shown 119 times.

Buy Now

Juniper Networks EX2200-C-12P-2G EX 2200 12-Port PoE+ L3 Switch w/ Rack Mounts:
$150

GreenTekSolutions Listing Template
  • Home
  • About Us
  • Payment
  • Shipping
  • Returns
  • response
  • Contact Us
  • Welcome to GreenTekSolutions-C
  • Add to Favorites
Store Categories
  • HP (31)
  • Networking (40)
  • Processors (1)
  • Dell (14)
  • Laptops (4)
  • Servers (18)
  • Apple (3)
  • IBM (3)
  • Memory Ram (1)
  • Switch (38)
  • Hard Drive (10)
  • Cisco (40)
  • Access Point (1)
  • Nortel (2)
  • Avaya (1)
  • Telecom (9)
  • Juniper (2)
  • Firewall (6)
  • KVM (1)
  • Tape Drive (2)
  • LTO-4 (1)
  • Brocade (6)
  • Netapp (2)
  • EMC (5)
  • Other (66)
Juniper Networks EX2200-C-12P-2G EX 2200 12-Port PoE+ L3 Switch w/ Rack Mounts
Description DO YOU HAVE EXCESS I.T EQUIPMENT? SELL IT TO US!
THE BEST IN BUYBACK PROGRAMS!

GreenTek Solutions LLC
Call us today for more information.
Our Hassle-free buyback program offers:


  • Free evaluation of your I.T equipment!
  • Purchase of I.T equipment in its current condition!
  • Shipping or pick-up is on us!
  • Free recycling of out of date equipment!


ITEM DESCRIPTION

This item is in used but good working condition. It was pulled from a working environment. Since this item is in used condition, it is possible that it can show some normal signs of wear, for example: scratches or scuffs but nothing that will affect performance.We offer a 30 day satisfaction guaranteed warranty on all the items listed in our store. If for some reason you're not happy with your purchase, please don't hesitate to contact us and we will try our best to fix it.


INCLUDED ITEMS

1x Juniper Networks EX2200-C-12P-2G- Previously Owned

1x Power Cord

1x Serial Console cable


TECH SPECS
BOOT OUTPUT

U-Boot 1.1.6 (Jun 29 2011 - 11:06:48)

Board: EX2200-C-12P-2G 4.6

EPLD: Version 14 (0x00)

DRAM: Initializing (512MB)

Flash: 8 MB

Firmware Version:01.00.00

USB: scanning bus for devices... 3 USB Device(s) found

scanning bus for storage devices... 1 Storage Device(s) found

ELF file is 32 bit

Consoles: U-Boot console

FreeBSD/arm U-Boot loader, Revision 1.1 Tue Apr 5 00:15:22 UTC 2011)

Memory: 512MB

bootsequencing is enabled

bootsuccess is set

new boot device = disk0s2:

Loading /boot/defaults/loader.conf

/kernel data=0x7fbae4+0xa5408 syms=[0x4+0xdf250+0x4+0xb6bbf]

Hit [Enter] to boot immediately, or space bar for command prompt.

Booting [/kernel]...

Kernel entry at 0x1400100 ...

GDB: debug ports: uart

GDB: current port: uart

KDB: debugger backends: ddb gdb

KDB: current backend: ddb

Copyright (c) 1996-2013, Juniper Networks, Inc.

All rights reserved.

Copyright (c) 1992-2006 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

The Regents of the University of California. All rights reserved.

JUNOS 11.4R5.7 #0: 2013-01-05 11:55:23 UTC

can't re-use a leaf (all_slot_serialid)!

CPU: Feroceon 88FR131 rev 1 (Marvell core)

WB enabled EABT branch prediction enabled

16KB/32B 4-way Instruction cache

16KB/32B 4-way write-back-locking-C Data cache

real memory = 536870912 (512 MB)

avail memory = 507248640 (483 MB)

SOC: Marvell 88F6281 rev A0, TClock 200MHz

ETHERNET SOCKET BRIDGE initialising

Initializing EXSERIES platform properties ...

mbus0: <Marvell Internal Bus (Mbus)> on motherboard

ic0: <Marvell Integrated Interrupt Controller> at mem 0xf1020200-0xf102023b on mbus0

timer0: <Marvell CPU Timer> at mem 0xf1020300-0xf102032f irq 1 on mbus0

gpio0: <Marvell Integrated GPIO Controller> at mem 0xf1010100-0xf101011f irq 35,36,37,38,39,40,41 on mbus0

uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 33 on mbus0

uart0: console (9600,n,8,1)

uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 34 on mbus0

ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq 48,19 on mbus0

usb0: EHCI version 1.0

usb0 on ehci0

usb0: USB revision 2.0

uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1

uhub0: 1 port with 1 removable, self powered

uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2

uhub1: single transaction translator

uhub1: 2 ports with 2 removable, self powered

umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3

mge0: <Marvell Gigabit Ethernet controller> at mem 0xf1072000-0xf1073fff irq 12,13,14,11,46 on mbus0

mge0: hardware MAC address ac:4b:c8:28:d5:bf

miibus0: <MII bus> on mge0

e1000phy0: <Marvell 88E1118 Gigabit PHY> on miibus0

e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto

i2c0: <Marvell I2C ARM OnChip Controller> at mem 0xf1011000-0xf101101f irq 29 on mbus0

syspld0: <SYSPLD> on i2c0

poe0: <POE> on i2c0

cfi0: <SPI flash - 8MB> at mem irq 23 on mbus0

mpfe0: <Juniper EX-series Packet Forwarding Engine> at mem 0xf4000000-0xf7ffffff irq 113 on mbus0

pcib0: <Marvell 88F6281 PCI-Express host controller> at mem irq 9 on mbus0

pci0: <PCI bus> on pcib0

Initializing product: 119 ..

bmeb: bmeb_lib_init done 0xc32b4800, addr 0xc1c9b654

bme0:Virtual BME driver initializing

Timecounter "CPU Timer" frequency 200000000 Hz quality 1000

da0 at umass-sim0 bus 0 target 0 lun 0

da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device

da0: 40.000MB/s transfers

da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)

Trying to mount root from ufs:/dev/da0s2a

WARNING: / was not properly dismounted

Attaching /packages/jbase via /dev/mdctl...

Mounted jbase package on /dev/md0...

Verified manifest signed by PackageProduction_11_4_0

Verified jboot signed by PackageProduction_11_4_0

Verified jbase-ex-11.4R5.7 signed by PackageProduction_11_4_0

Mounted fips-mode-arm package on /dev/md1...

Verified manifest signed by PackageProduction_11_4_0

Verified fips-mode-arm-11.4R5.7 signed by PackageProduction_11_4_0

Mounted jcrypto-ex package on /dev/md2...

Verified manifest signed by PackageProduction_11_4_0

Verified jcrypto-ex-11.4R5.7 signed by PackageProduction_11_4_0

Mounted jdocs-ex package on /dev/md3...

Verified manifest signed by PackageProduction_11_4_0

Verified jdocs-ex-11.4R5.7 signed by PackageProduction_11_4_0

Mounted jkernel-ex-2200 package on /dev/md4...

Verified manifest signed by PackageProduction_11_4_0

Verified jkernel-ex-2200-11.4R5.7 signed by PackageProduction_11_4_0

Mounted jpfe-ex22x package on /dev/md5...

Verified manifest signed by PackageProduction_11_4_0

Verified jpfe-ex22x-11.4R5.7 signed by PackageProduction_11_4_0

Mounted jroute-ex package on /dev/md6...

Verified manifest signed by PackageProduction_11_4_0

Verified jroute-ex-11.4R5.7 signed by PackageProduction_11_4_0

Mounted jswitch-ex package on /dev/md7...

Verified manifest signed by PackageProduction_11_4_0

Verified jswitch-ex-11.4R5.7 signed by PackageProduction_11_4_0

Mounted jweb-ex package on /dev/md8...

Verified manifest signed by PackageProduction_11_4_0

Verified jweb-ex-11.4R5.7 signed by PackageProduction_11_4_0

Executing

Automatic reboot in progress...

Media check on da0 on ex platforms

** /dev/da0s2a

** Last Mounted on /

** Root file system

** Phase 1 - Check Blocks and Sizes

** Phase 2 - Check Pathnames

** Phase 3 - Check Connectivity

** Phase 4 - Check Reference Counts

** Phase 5 - Check Cyl groups

1445 files, 48313 used, 45849 free (33 frags, 5727 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

Computing slice and partition sizes for /dev/da0 ...

** /dev/da0s3e

** Last Mounted on /var

** Phase 1 - Check Blocks and Sizes

INCORRECT BLOCK COUNT I=12319 (32 should be 28)

CORRECT? yes

** Phase 2 - Check Pathnames

** Phase 3 - Check Connectivity

** Phase 4 - Check Reference Counts

** Phase 5 - Check Cyl groups

FREE BLK COUNT(S) WRONG IN SUPERBLK

SALVAGE? yes

SUMMARY INFORMATION BAD

SALVAGE? yes

BLK(S) MISSING IN BIT MAPS

SALVAGE? yes

455 files, 409 used, 62493 free (141 frags, 7794 blocks, 0.2% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

***** FILE SYSTEM WAS MODIFIED *****

savecore: could not be determined

No dump exists

** /dev/da0s3d

** Last Mounted on /var/tmp

** Phase 1 - Check Blocks and Sizes

** Phase 2 - Check Pathnames

** Phase 3 - Check Connectivity

** Phase 4 - Check Reference Counts

** Phase 5 - Check Cyl groups

10 files, 14 used, 188900 free (20 frags, 23610 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

** /dev/da0s4d

** Last Mounted on /config

** Phase 1 - Check Blocks and Sizes

** Phase 2 - Check Pathnames

** Phase 3 - Check Connectivity

** Phase 4 - Check Reference Counts

** Phase 5 - Check Cyl groups

16 files, 19 used, 31647 free (31 frags, 3952 blocks, 0.1% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

root:RE:0% ...Simple Network Management Protocol process: LIBJNX_SNMP_ENGINE_SCAN_FAILURE: snmp_engine_read: fscanf : /var/db/snmp_engine.db scanning: full_engine_id Erro

root:RE:0% rror: 0

root:RE:0% complete

root:RE:0% ial options: debugger_on_panic=NO debugger_on_break=NO.

root:RE:0% ional daemons: .

root:RE:0% l network setup:

rootRE:0%

root:RE:0% rface configuration:

root:RE:0% aemons:.

root:RE:0% outing options:kern.module_path: /boot//kernel;/boot/modules ->

root:RE:0% rv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-series platform NETPFE module

root:RE:0% eertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1

root:RE:0%

root:RE:0% onal network setup:.

root:RE:0% al network daemons:.

root:RE:0% nfig path: /usr/lib /opt/lib

root:RE:0% ndard daemons: cron.

root:RE:0% e initialization:.

root:RE:0% evel: -1 -> 1

root:RE:0% al daemons:.

root:RE:0% 1:46:22 UTC 2015

root:RE:0% dev/da0 has dual root support

root:RE:0% 1a

root:RE:0% CLEAN; SKIPPING CHECKS

root:RE:0% free (23 frags, 5670 blocks, 0.0% fragmentation)

root:RE:0%

root:RE:0% yu0)

root:RE:0%

root:RE:0%

root:RE:0%

root:RE:0% .4R5.7 built 2013-01-05 11:55:23 UTC

roo:RE:0%

rootRE:0%

root:RE:0% cli

root>

SHOW VERSION OUTPUT

root> show version

Model: ex2200-c-12p-2g

JUNOS Base OS boot [11.4R5.7]

JUNOS Base OS Software Suite [11.4R5.7]

JUNOS Kernel Software Suite [11.4R5.7]

JUNOS Crypto Software Suite [11.4R5.7]

JUNOS Online Documentation [11.4R5.7]

JUNOS Enterprise Software Suite [11.4R5.7]

JUNOS Packet Forwarding Engine Enterprise Software Suite [11.4R5.7]

JUNOS Routing Software Suite [11.4R5.7]

JUNOS Web Management [11.4R5.7]

JUNOS FIPS mode utilities [11.4R5.7]

SHOW DIAGNOSTICS OUTPUT

root> show chassis hardware

Hardware inventory:

Item Version Part number Serial number Description

Chassis GR0212221176 EX2200-C-12P-2G, POE+

Routing Engine 0 REV 06 650-036547 GR0212221176 EX2200-C-12P-2G, POE+

FPC 0 REV 06 650-036547 GR0212221176 EX2200-C-12P-2G, POE+

CPU BUILTIN BUILTIN FPC CPU

PIC 0 BUILTIN BUILTIN 12x 10/100/1000 Base-T

PIC 1 REV 06 650-036547 GR0212221176 2x (10/100/1000 Base-T or GE SFP)

Power Supply 0 PS 180W AC

root>

root> show chassis routing-engine

Routing Engine status:

Slot 0:

Current state Master

Election priority Master (default)

DRAM 512 MB

Memory utilization 42 percent

CPU utilization:

User 2 percent

Background 0 percent

Kernel 2 percent

Interrupt 0 percent

Idle 96 percent

Model EX2200-C-12P-2G, POE

Serial ID GR0212221176

Start time 2015-04-20 21:43:19 UTC

Uptime 10 minutes, 12 seconds

Last reboot reason Router rebooted after a normal shutdown.

Load averages: 1 minute 5 minute 15 minute

0.10 0.77 0.61

Transfer of ownership of fully functional equipment and components are intended solely for reuse.


Tested for Key Functions, R2/Ready for Resale Listed BY: DS

  • PAYMENT
  • SHIPPING
  • RETURNS
  • TERMS
  • GUARANTEE
  • ABOUT US
  • PAYMENT
  • PAYMENT

    • Only PayPal and major credit cards are accepted. (Amex, Visa, MasterCard)
    • Immediate Payment is required after the Winning offer
    • Item will be shipped immediately on the same or next business day of receiving full payment

  • SHIPPING
  • SHIPPING

    • Shipping within the 48 Contiguous United States is Free
    • International buyers are welcome.
    • Alaska, Hawaii and Puerto Rican buyers have to contact me for a shipping quote prior offerding.
    • P.O. Box Delivery is offered but is possible that there can be shipping charges.
    • APO/FPO Delivery is offered but is possible that there can be shipping charges.
    • PayPal Confirmed Addresses Only
    • Items Will be Shipped by USPS or FedEx on the Same or Next Business day of receiving full payment
    • UPS or FedEx Tracking Number will be provided

  • RETURNS
  • RETURNS

    "AS-IS" items have no warranty and do not qualify for refunds or exchanges. Refunds are only provided if a suitable replacement is not available. The buyer must notify GreenTek Solutions in writing (e-mails qualify) of any problem within the documented warranty period to qualify for refund or replacement. GreenTek Solutions is not obligated to offer warranty services beyond the stated warranty period. Return Authorization (RMA) is required for defective product returns. Credit for returned item will be issued after the return of the defective product.

    Upon receipt of Return Authorization, the buyer has 3 Business Days to ship item to us and provide tracking number via e-mail. GreenTek Solutions does not issue refunds for any form of shipping, either to or from the buyer. Items that are damaged while in the buyer's possession, regardless of circumstances, do not qualify for a refund or exchange. In addition, items damaged by improper packaging when returned to GreenTek Solutions will not qualify for refund or exchange.

    Items with Warranty: We affix "warranty labels" on all items that have a warranty. Evedince of tampering, removal or broken seal, will VOID the warranty.

  • TERMS
  • TERMS

    Texas buyers and local picked up customers at our office - GreenTek Solutions - will be charged 8.25% Sales Tax. Buyers are required to provide payment within 1 week from sale close, unless other arrangements are made. Late payments may result in order cancellation.

    International sales over $1000 will only ship after payment has cleared. International sales over $1000 will only ship after payment has cleared.

    PLEASE do not ask us to reduce the amount of the invoice for customs purposes, because we will not do it. We will only declare items purchased as a commercial sample, nothing else (gift, return, etc.).

  • GUARANTEE
  • GUARANTEE

    Buyer may return defective Goods for replacement or refund (as elected by Seller) within 30 days of purchase. Subject to Seller's reasonable approval, Buyer may return for credit within 30 days of purchase non-defective Goods the sales price of which, together with the sales price of any other non-defective items previously returned to Seller by Buyer, do not exceed 2% of the aggregate sales prices of all non-defective products purchased by Buyer from Seller. Non-defective, special order products are normally not accepted for return; other returns are handled on a case-by-case basis in Seller's sole discretion. All returns must be accompanied by an authorized RMA number, which is valid for 15 days after the date of issuance, and returns of non-defective normally stocked items in resalable condition will be accepted for credit subject to a restocking charge of no less than 15% of the sales price.

    A Return Material Authorization (RMA) number must be obtained for all returns. Please contact GreenTek Solutions RMA for assistance.

  • ABOUT US
  • ABOUT US

    GreenTek Solutions entirely eliminates the risk associated with electronic recycling by managing the entire process from pick-up to final destination. We recover, re-market and recycle technology from companies from all sizes, large public retail, government entities and education institutions.

Useful Links:
  • HOME
  • ABOUT US
  • PAYMENT
  • Shipping
  • RETURN
  • response
  • CONTACT US
Thanks for visiting
ABOUT US Sell us your IT Equipment! If you have any excess inventory, GreenTek Solutions is able to pay cash or arrange a consignment agreement for your items. Contact us directly for details regarding any inventory of value. If you have a list for excess inventory please add us to your distribution list and someone will reply in a timely manner.

Read More PAYMENT OPTIONS © Copyright 2021, GreenTekSolutions-C All rights reserved. store Developed By

*GreenTek Solutions LLC is not an authorized reseller, distributor, or refurbisher or service center of Juniper products, and is not making that claim. Please contact Juniper for a complete list of authorized distributors. All trademarks, service marks, trade names, product names, and logos appearing on this site are the property of their respective owners. Any rights not expressly granted herein are reserved.



Buy Now

Tp-link 5-port Gigabit Desktop Switch Tl-sg105 picture
Tp-link 5-port Gigabit Desktop Switch Tl-sg105


Cisco Rackmount Kit Rckmnt-19-cmpct Catalyst 2960-8tc, 2960-8tc-s Network Switch picture
Cisco Rackmount Kit Rckmnt-19-cmpct Catalyst 2960-8tc, 2960-8tc-s Network Switch


Hp 1420-24g-2sfp Switch - 24 Ports - 2 X Expansion Slots - 10/100base-tx, picture
Hp 1420-24g-2sfp Switch - 24 Ports - 2 X Expansion Slots - 10/100base-tx,


Monoprice 8 Port 10/100/1000mbps Desktop Gigabit Ethernet Switch W/ Support picture
Monoprice 8 Port 10/100/1000mbps Desktop Gigabit Ethernet Switch W/ Support


Documentation

  • AIX Local Security Checks
  • Backdoors
  • CentOS Local Security Checks
  • CGI abuses
  • CISCO
  • Databases
  • Debian Local Security Checks
  • Default Unix Accounts
  • Denial of Service
  • Fedora Local Security Checks
  • Finger abuses
  • Firewalls
  • FreeBSD Local Security Checks