Juniper EX2200-C EX2200-C-12P-2G 12-Port Gigabit Ethernet PoE Network Switch for Sale

Juniper EX2200-C EX2200-C-12P-2G 12-Port Gigabit Ethernet PoE Network Switch For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Juniper EX2200-C EX2200-C-12P-2G 12-Port Gigabit Ethernet PoE Network Switch:
$139.99

TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
Unit powers on and lights up. The unit has been reset to the factory default settings. See console log below. The unit has scuffs and scratches on the exterior. They do not affect the functionality of the unit.

COMPONENTS INCLUDED IN THIS sale:• (1) - JUNIPER EX2200-C EX2200-C-12P-2G 12-PORT GIGABIT ETHERNET POE NETWORK SWITCH
• (1) - POWER CORD

REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.

ADDITIONAL INFORMATION:U-Boot 1.1.6 (Apr 4 2013 - 10:33:10)

Board: EX2200-C-12P-2G 4.12
EPLD: Version 14 (0x00)
DRAM: Initializing (512MB)
Flash: 8 MB

Firmware Version:01.00.00
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

ELF file is 32 bit
Consoles: U-Boot console

FreeBSD/arm U-Boot loader, Revision 1.1
Memory: 512MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel text=0x847481 data=0x41b34+0xdd8bc syms=[0x4+0xf1130+0x4+0xc8be4]

Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x1400100 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2018, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R12-S12 #0: 2018-12-28 12:54:20 UTC
/>can't re-use a leaf (all_slot_serialid)!
CPU: Feroceon 88FR131 rev 1 (Marvell core)
cpu53: Feroceon 88FR131 revision WB enabled EABT branch prediction enabled
16KB/32B 4-way Instruction cache
16KB/32B 4-way write-back-locking-C Data cache
real memory = 536870912 (512 MB)
avail memory = 503205888 (479 MB)
SOC: Marvell 88F6281 rev A0, TClock 200MHz
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
mbus0: on motherboard
ic0: at mem 0xf1020200-0xf102023b on m
bus0
timer0: at mem 0xf1020300-0xf102032f irq 1 on mbus0
gpio0: at mem 0xf1010100-0xf101011f irq 35,
36,37,38,39,40,41 on mbus0
uart0: at mem 0xf1012000-0xf101201f irq 33 on mbus0
uart0: console (9600,n,8,1)
uart1: at mem 0xf1012100-0xf101211f irq 34 on mbus0
ehci0: at mem 0xf1050000-0xf1050fff irq
48,19 on mbus0
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2
uhub1: single transaction translator
uhub1: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3
mge0: at mem 0xf1072000-0xf1073fff irq 12,
13,14,11,46 on mbus0
mge0: hardware MAC address 54:4b:8c:e4:24:bf
miibus0: on mge0
e1000phy0: on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto

i2c0: at mem 0xf1011000-0xf101101f irq 29 on
mbus0
syspld0: on i2c0
poe0: on i2c0
cfi0: at mem irq 2
3 on mbus0
mpfe0: at mem 0xf4000000-0xf7ffffff
irq 113 on mbus0
pcib0: at mem 0xf1040000-0xf1041ff
f,0xe8000000-0xefffffff irq 9 on mbus0
pci0: on pcib0
Initializing product: 119 ..
bmeb: bmeb_lib_init done 0xc338a800, addr 0xc1d6132c
bme0:Virtual BME driver initializing
Timecounter "CPU Timer" frequency 200000000 Hz quality 1000
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread "wkupdaemon" (pid 42) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R12-S12 signed by PackageProduction_12_3_0
Mounted fips-mode-arm package on /dev/md1...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-arm-12.3R12-S12 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R12-S12 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md3...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R12-S12 signed by PackageProduction_12_3_0
Mounted jkernel-ex-2200 package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-2200-12.3R12-S12 signed by PackageProduction_12_3_0
Mounted jpfe-ex22x package on /dev/md5...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex22x-12.3R12-S12 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R12-S12 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md7...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R12-S12 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R12-S12 signed by PackageProduction_12_3_0
Executing />Automatic reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
** Last Mounted on /instrootmnt
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1535 files, 57400 used, 36762 free (18 frags, 4593 blocks, 0.0% fragmentation)
** /dev/da0s3e
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
SUMMARY INFORMATION BAD
SALVAGE? yes

BLK(S) MISSING IN BIT MAPS
SALVAGE? yes

909 files, 1478 used, 61424 free (400 frags, 7628 blocks, 0.6% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

***** FILE SYSTEM WAS MODIFIED *****
Computing slice and partition sizes for /dev/da0 ...
savecore: could not be determined
No dump exists
** /dev/da0s3d
** Last Mounted on /var/tmp
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
11 files, 15 used, 188899 free (19 frags, 23610 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
** /dev/da0s4d
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
17 files, 20 used, 31646 free (38 frags, 3951 blocks, 0.1% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
rm: /var/etc/pam.conf: Operation not permitted
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=69 fileid
=51404 gen=1 uid=0 pid=463
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo
kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-ser
ies platform NETPFE module
if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere gr
at_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
starting local daemons:set cores for group access
.
Fri Dec 28 15:16:08 UTC 2018
Boot media /dev/da0 has dual root support
WARNING: JUNOS versions running on dual partitions are not same
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 36250 free (18 frags, 4529 blocks, 0.0% fragmentation)

Amnesiac (ttyu0)

login: root

Logging to master
.
--- JUNOS 12.3R12-S12 built 2018-12-28 12:54:20 UTC

Broadcast Message from root@
(no tty) at 15:17 UTC...

ALERT:Auto-image upgrade will start. This can terminate config CLI sess
ion(s). Modified configuration will be lost. To stop Auto-image, in CLI do the
following: 'edit; delete chassis auto-image-upgrade; commit'.

root@:RE:0% Please Click Here to Visit Our StoreSearchBy37 - 251203 | Loc: Z142 | L: Sean Dutton |T: | PM: Nick | QTY: 0| Plan: T1- Q5 or more 5 pounds or more |12.00"x14.00"x5.00"9.00lbs |Start: $0.00 | BIN: $139.99 | |5/30/2023 ||58319

Recent Threads

Juniper EX2200-C EX2200-C-12P-2G 12-Port Gigabit Ethernet PoE Network Switch For Sale

Juniper EX2200-C EX2200-C-12P-2G 12-Port Gigabit Ethernet PoE Network Switch: $139.99

Juniper EX2200-C EX2200-C-12P-2G 12-Port Gigabit Ethernet PoE Network Switch:
$139.99