2\"X72\" Belt Grinder with Contact Wheel for Knife Making or Metal Work For Sale

2\
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

2\"X72\" Belt Grinder with Contact Wheel for Knife Making or Metal Work:
$760.00

I have made several of these belt grinders and use one myself for my knifemaking and other grinding needs. I feel that this grinder is one of the mostheavy duty and well built belt grinders that you could use.

The receiver and bearing supports are made from 3/4\" cold roll 1018steel.

The 18\" by 6\" base is 1/2\" steel with 3/8\" holes in thecorners for mounting.

The adjustable tracking arm and support is also 3/4\" cold roll 1018steel. As you can see in the pictures I have added an adjustablealuminumextension arm and handle to the tracking arm for easier beltchanges. The handle can also be mounted directly to the tracking arm if that ispreferred.

The receiver is made from 1/2\" 1018 cold roll steel with a 1 1/2\"solid steel tooling arm that fits perfectly into the receiver. No light weightsquare tubing here, that usually will have a loose fit.

The flat platen mount is machined from 1/2\" aluminum with 2\" by 2\"aluminum idler wheels. I have made these wheels (as well as the trackingwheel)with 1/2\" ID by 1 1/4\" OD bearings that have an insidespacer between the bearings to prevent bearing damage while tightening.

I have changed the platen a little from the others I have sold.Instead of the 8\" by 2\" by 1/2\" cold roll steel I have used 8\" by 2\" by 1/2\" precision ground 01 tool steel and heat treated it to a RC hardness of 60- 61. I believe this will make itlast much longer and preform better.

The platen attachment can be easily changed out to the included contactwheel by removing 2 bolts and replacing with contact wheel spacer and then the 8\"contact wheel. I have been making these contact wheels now for a while and amvery happy with how they are preforming. The hub is machined from 6061 aluminumwith 3/4\" ID by 1 3/4\" OD bearings. The tire is 1\" thick urethane rubberwith a 70 duro hardness and a heat rating of 210 degrees.

The 8” contact wheel can also be added to the platen mount with the 2” idlerwheels for a 3 wheel grinding setup.

The work rest is 6\" by 4\" by 1/2\" thick cold roll steel. Itcan be used on the flat platen attachment and the 8\" contact wheel. It iseasily mounted to the tool arm with 2 bolts.

Drive wheel:4\" by 2 3/8\" wide and tapered .030 inches fromcenter to each side. It is mounted to a 3/4\"shaft with a 3/16\"keyway, key and set screw. The otherend of the shaft also has a3/16\" keyway andkey for mounting your choice of drive pulley.

Tracking wheel: 3 3/4\" by 2 1/2\" wide and tapered .030 inches fromcenter to each side. It has 1/2\" ID bearings and is mounted with a1/2\" bolt.

This will be partially disassembled and shipped in1 box.It is heavy(100+ lbs.).Reassembly will be easy by using the pictures as a guide.


Buy Now
Related Items:
Warning: Invalid argument supplied for foreach() in /home/vscan/public_html/store/relateditems.php on line 72

Documentation

  • AIX Local Security Checks
  • Backdoors
  • CentOS Local Security Checks
  • CGI abuses
  • CISCO
  • Databases
  • Debian Local Security Checks
  • Default Unix Accounts
  • Denial of Service
  • Fedora Local Security Checks
  • Finger abuses
  • Firewalls
  • FreeBSD Local Security Checks