Ultimate+ Cisco CCNA Kit 2610 2520 2514/03 16/16 2924

This Ultimate+ Cisco CCNA Kit includes
2610 32/8 & 2520 2514 2503 16/16 Routers
plus 2924 & 1924 Catalyst Switches!

1 - Cisco 2610 with 1-WIC-1T, & 1-WIC-1DSU-56K with 32 Meg System Ram & 8 Meg System Flash!

1 - Cisco 2520 4 Serial Port Router loaded with 16 Meg System Ram & 16 Meg System Flash!1 - Cisco 2514 Router loaded with 16 Meg System Ram & 16 Meg System Flash!1 - Cisco 2503 Router loaded with 16 Meg System Ram & 16 Meg System Flash!1 - Cisco 1602R Router loaded with 8 Meg System Ram & 4 Meg System Flash!

Plus1 - Cisco WS-C2924-XL-EN - 24 Port 10/100BaseT Switch running Enterprise Edition Software Version Enterprise Version 12.0(5)WC17! The latest Enterprise release from Cisco in February 2007! This switch has one bad port, but is still great for Cisco training.1 - Cisco WS-C1924-EN - 24 10BaseT & 2 100BaseT Switch running Enterprise Edition Software version 9.00.07! Interconnecting fiber cable is included!Cabling, Accessories and More! This Cisco kit is ready To Go!

The Cisco IOS Software included supports Firewall, IPv6, IPSec, IKE Security Protocol, MD5, VPN & more!These photos are of the actual units you will receive in this auction. You will also receive brand new cables with this kit.

The best (and really only) way to get your CCNA/CCNP/CCIE certification is to learn on Cisco equipment. There is nothing that compares to hands-on experience with your own Cisco equipment. With this kit, you can study and learn at your own pace. This is a great kit with features that both the beginning student who is studying for the CCNA and the advanced students working on their CCNP and/or CCIE will appreciate. When I was beginning my Cisco training, I had a difficult time getting the right equipment and especially the required IOS software for my studies. Then I saw the outrageous prices other sellers were charging for questionable Cisco equipment (with obsolete IOS software) that no student could constructively use. That is why, now years latter, I am putting together, THE BEST KITS POSSIBLE, with all the accessories included that the student will need for their Cisco studies, at a fair price, from a seller who has been through all of this and knows what is required.

Sure, you can buy Cisco hardware everywhere on Ebay, and most of the auctions will state 'Untested', 'No way to test this item' or, the one I am particularly fond of, 'Removed from a working environment'. Over the years, we have discarded more than two dumpsters full of this type of equipment that was defective. Yes, the 'environment' may have been working, but that particular piece of equipment might not have (why do you think a business would have removed it?). Before listing, we scrutinize each piece of Cisco equipment, then run it through a full range of tests to ensure you won't get bad equipment.

The most important thing that you, as a buyer should look for in any kit (including mine), is the Cisco IOS Operating System(s) that are supplied, (and the router functions that each will allow). With any kit, you either get the IOS image(s) you will need for your full range of studies included with the equipment or pay ($$$$$) to Cisco. Other kits may give you some 'generic' software or say 'Enterprise Software' without any information on the IOS features. Cisco has released literally hundreds of IOS varieties for these routers, with the majority only allowing very basic router functions. You should ask the sellers of those high priced Cisco kits exactly what functions their IOS supports (if they know at all), then compare that with the IOS software functions listed here. After completing all of the Cisco studies ourselves, we know what is required, and strive to provide you with the widest range of functions that you will need for your CCNA/CCNP/CCIE studies, pre-loaded on this equipment. Even if you do not buy from us, at least educate yourself on what you will get. Please click on my link at the top of this auction page for a list on the Frequently Asked Questions we receive about Cisco Kits.We strive to provide the best kits possible, with the widest supported router features and functions, fully operational, with all the right items included to get you up and running, right out of the box. All items shown in the photos and listed in the description are what is included with this kit. You will not be disappointed with this Cisco Kit.

This kit also includes one free CD which contains Application Programs, CCNA Training Materials including the new 640-802 Exam, CCNA Labs, Cisco Documentation (Cisco 2500 Series Routers, Cisco 1900 Switches, Cisco IOS, Software Commands, plus many, many other PDF's that cannot be mentioned here), Practice Tests, Study Guides, How To's, plus numerous additional IOS Images for use in your studies. This CD is so jam-packed, it contains more than enough information for you to pass you CCNA the first time. The information in this CD alone, is worth more than the price of this auction, and will help give you the inside track for your Cisco training!

Purchased separately, this kit, with these features, cabling, and all the extras, would cost a whole lot more than the starting price. We do extensive testing on each item before listing, with each kit bench tested for 24 hours under live data transfers, and is guaranteed to be operational upon arrival. If an item is received DOA, just send it back and we will replace it (of course the returned item must match what was shipped).

Please check my 100% positive feedback from my satisfied buyers, then compare what is included here with other kits selling on Ebay, and you will see what a great deal this is.This kit Includes:1 - Cisco 2610 Router 32D/8F with one WIC-1DSU-56K Module, and one WIC-1T 1 Port Serial Module, plus 1 10BaseT, 1 Console and 1 AUX port running c2600-i-mz.122-29 (see routers output below).
1 - Cisco 2520 Router 16D/16F (4 serial (2 Hi-speed & 2 Low-speed), 1 Ethernet AUI/RJ-45, 1 ISDN BRI port, 1 Console & 1 AUX port) running Enterprise Version c2500-jk8os-l.122-1d Software (see show version below).
1 - Cisco 2514 Router 16D/16F (2 serial, 1 Ethernet AUI, 1 Console & 1 AUX port) running Enterprise Version c2500-ik8os-l.122-6a Software (see show version below).
1 - Cisco 2503 Router 16D/16F (2 serial, 1 Ethernet AUI, 1 ISDN BRI Port, 1 Console & 1 AUX port) running Enterprise Version c2500-is-l.122-8.t Software (see show version below).
1 - Cisco 1602R Router 8D/4F with one On-board Switched 56K Line Interface, plus 1 10BaseT, and 1 Console port running c1600-y-mz.120-9 (see routers output below).
1 - Cisco WS-C2924-XL-EN Catalyst Switch (24 10/100BaseT ports) running Enterprise Edition Software version C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1)! (WC17 is the latest Enterprise Edition Software release from Cisco). This switch has one bad port, but all other ports are tested and operational.
1 - Cisco WS-C1924-EN Catalyst Switch (24 10BaseT, 2 100BaseT, 1 AUI port) running Enterprise Edition Software version 9.00.07! All ports are tested and operational.3 - CentreCOM AUI Transceivers
4 - DB-60 DCE/DTE serial crossover cables
1 - Cisco DB-9 to RJ45 Console Cable
7 - Ethernet Straight Cables
2 - Ethernet Crossover Cables
7 - Power CablesPlus, the free CD included with this kit contains Application Programs, CCNA Training Materials, CCNA Labs, Cisco Documentation (Routers, Switches, IOS, Software Commands, Tutorials, etc.), Practice Tests, Study Guides, How To's, plus Numerous additional IOS Images for your studies.The photos above are of the actual items you will receive in this auction.Basically, the Enterprise Software IOS features that you will need for your CCNA/CCIE/CCNP (and beyond) require 16 Meg flash and 16 Meg system memory.

Each Cisco Router and Catalyst Switch has been professionally refurbished with all ports tested for functionality, configurations erased and all passwords removed. The cabling in this kit includes DCE/DTE Serial Crossover Cables which connect two router serial ports together without external circuits or modems, Ethernet Cables (both crossover and straight), Cisco Console Cable for connection to the Console port on each Cisco Router and Catalyst Switch, plus CentreCOM transceivers (the best for Cisco routers).The Enterprise Software IOS loaded on these routers support BGP, BGP 4, CDP (Cisco Discovery Protocol) Version 2, Enhanced IGRP (EIGRP), Frame Relay, IGRP, IS-IS, On Demand Routing (ODR), OSPF, Routing Information Protocol (RIP), Spanning Tree Protocol (STP) plus IKE Security Protocol, IPv6 (Internet Protocol Version 6), IPSEC 56 and Firewall Feature Set, (plus many other features). The free companion study CD contains additonal 2500 series IOS images and Cisco information, TFTP Server, How To's plus Cisco documentation for 2500 series routers, 1900 series switches and CCNA Study Guides.The Cisco 2520 Router is equipped with 4 serial ports (2 high-speed synchronous serial ports, and 2 low-speed asynchronous/synchronous serial ports), 1 Ethernet port (both AUI and RJ-45), 1 ISDN/BRI port, 1 Console port, 1 AUX port and can be used as a multiprotocol router or can be configured as a Frame Relay switch and is loaded with 16 Meg System Ram & 16 Meg System Flash. The 2520 router with it's built-in Ethernet RJ-45 connector does not require a CentreCOM transceiver for external connections.The Cisco 2514 Routers are equipped with 2 serial ports, 2 Ethernet ports (AUI), 1 Console port, 1 AUX port and is loaded with 16 Meg System Ram & 16 Meg System Flash.The Cisco 2503 Router is equipped with 2 serial ports, 1 Ethernet port (AUI), 1 ISDN/BRI port,1 Console port, 1 AUX port and is loaded with 16 Meg System Ram & 16 Meg System Flash.Plus the ISDN/BRI ports on the Cisco 2520 and 2503 Routers and the 56K ports on the Cisco 2610 and 1602R Routers can be configured for WAN technology (requires additional external equipment which is not included in this auction).Plus, the WS-C2924-XL Series Catalyst Switch running Enterprise Edition Software gives you the extended switching command capabilities that you want for your advanced Cisco training. All ports on this switch have been tested for functionality and the condition listed above, the configurations erased and all passwords removed.

With Cisco 1900 Series Catalyst Switches, nothing less than Enterprise Edition Software installed is the requirement. The WS-C1924 Catalyst Switch is loaded with Enterprise Edition Software version 9.00.07 (the latest software), which gives you both Command Line Interface (CLI) and Menu-Based user interface plus multiple Virtual Private Network (VPN) capabilities. All ports on this switch has been tested for functionality and the condition listed above, the configurations erased and all passwords removed.

The specifications of this kit:

Cisco2610#sh verCisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(29), RELEASE SOFTWARE (fc3)
Technical Support: (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 11-May-05 17:27 by kellmill
Image text-base: 0x8000808C, data-base: 0x80A1DB00ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-I-M), Version 12.2(29), RELEASE SOFTWARE (fc3)Cisco2610 uptime is 49 minutes
System returned to ROM by power-on
System image file is 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory.
Processor board ID JAD05030KSH (522257558)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)Configuration register is 0x2102Cisco2610#sh flashSystem flash directory:
File Length Name/status
1 5570496 c2600-i-mz.122-29.bin
[5570560 bytes used, 2293756 available, 7864316 total]
8192K bytes of processor board System flash (Read/Write)Cisco2610#

IP - c2600-i-mz.122-29.bin - Address Resolution Protocol (ARP), BGP 4, Challege Handshake Authentication Protocol (CHAP), Compression Control Protocol, DHCP Server/Client, Double Authentication , HTTP Security, NAT - Network Address Translation, Password Authentication Protocol (PAP), SNMPv3 (SNMP Version 3), TACACS+

Cisco2520#sh verCisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JK8OS-L), Version 12.2(1d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 03-Feb-02 22:01 by srani
Image text-base: 0x0307EEE0, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

Cisco2520 uptime is 9 minutes
System returned to ROM by reload
System image file is 2520 (68030) processor (revision M) with 14336K/2048K bytes of memory.
Processor board ID 09928584, with hardware revision 00000003
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Low-speed serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

Cisco2520#sh flash

System flash directory:
File Length Name/status
1 16505800 c2500-jk8os-l.122-1d.bin
[16505864 bytes used, 271352 available, 16777216 total]
16384K bytes of processor board System flash (Read Plus IPSEC 56 - c2500-jk8os-l.122-1d.bin According to the Cisco website, some of the major features of this IOS are:

AppleTalk 1 and 2, ATM-DXI, Banyan VINES, BGP, BGP 4, CDP (Cisco Discovery Protocol) Version 2, DECNet IV&V, EGP, Encrypted Kerberized Telnet, Enhanced IGRP (EIGRP), Firewall Feature Set, Frame Relay, IGMP Version 1 & 3, IGRP, IP Routing, IPSec Network Security, ISDN, IS-IS, Kerberos V client support, Mobile IP, Multicast BGP (MBGP), Multicast NAT, Multilink PPP, NAT - Network Address Translation, NetFlow, Novell IPX, On Demand Routing (ODR), OSPF, PAD Subaddressing, Password Authentication Protocol (PAP), Policy-Based Routing (PBR), PPP, RADIUS, Routing Information Protocol (RIP), Simple Network Management Protocol (SNMP), SNMP Version 3, Spanning Tree Protocol (STP) Extension, Stub IP Multicast Routing, STUN (Serial Tunnel), TACACS+, Transparent Bridging, Tunneling of Asynchronous Security Protocols, Virtual Private Dial-up Network (VPDN), VPN Tunnel Management, X.25, XNS

Cisco2514#sh verCisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IK8OS-L), Version 12.2(6a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Sat 01-Dec-01 19:03 by pwade
Image text-base: 0x0306BFC8, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

Cisco2514 uptime is 3 minutes
System returned to ROM by reload
System image file is 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory.
Processor board ID 13266188, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

Cisco2514#sh flash

System flash directory:
File Length Name/status
1 14087828 c2500-ik8os-l.122-6a.bin
[14087892 bytes used, 2689324 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)

Cisco2514#IP/FW PLUS IPSEC 56 - c2500-ik8os-l.12.2-6a.bin According to the Cisco website, some of the major features of this IOS are:

Address Resolution Protocol (ARP), Always On Dynamic ISDN (AO/DI), ATM-DXI, BGP, BGP 4, BSTUN (Block Serial Tunneling), CDP (Cisco Discovery Protocol) Version 2, CGMP - Cisco Group Management Protocol, DHCP Server, Dial Backup, Dial-on-demand, Dialer Profiles, Diffie-Hellman Group 5, Double Authentication, EGP, Enhanced IGRP (EIGRP), Enhanced IGRP Stub Routing, Frame Relay, Frame Relay Tunnel Switching, Fast-Switched Policy Routing, Fast-Switched SRTLB, Firewall Feature Set, HSRP - Hot Standby Router Protocol, IKE Security Protocol, Integrated routing and bridging (IRB), Internet Protocol Control Protocol (IPCP) address negotiation, IPSec Network Security, ISDN, L2TP Layer 2 Tunneling Protocol, Mobile IP, Multicast BGP (MBGP), Multicast NAT, Multichassis MultiLink PPP (MMP), Multihop VPDN, National ISDN Switch Types for BRI and PRI Interfaces, NAT - Network Address Translation, NetFlow, On Demand Routing (ODR), OSPF, PAD Subaddressing, Password Authentication Protocol (PAP), Policy-Based Routing (PBR), PPP, PPP over Frame Relay, RADIUS, Password Authentication Protocol (PAP), Response Time Reporter (RTR), Routing Information Protocol (RIP), Snapshot routing, SNMP (Simple Network Management Protocol), SNMPv2C, SNMPv3 (SNMP Version 3), Spanning Tree Protocol (STP), Spanning Tree Protocol (STP) Extension, STUN (Serial Tunnel), TACACS+, Trusted Root Certification Authority, Tunnel Endpoint Discovery,Virtual Private Dial-up Network (VPDN), VPN Tunnel Management, X.25

Cisco2503#sh verCisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(8)T, RELEASE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 13-Feb-02 21:11 by ccai
Image text-base: 0x0306DA78, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

Cisco2503 uptime is 4 minutes
System returned to ROM by reload
System image file is 2500 (68030) processor (revision N) with 14336K/2048K bytes of memory.
Processor board ID 17047158, with hardware revision 00000001
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

Cisco2503#sh flash

System flash directory:
File Length Name/status
1 13859704 c2500-is-l.122-8.t.bin
[13859768 bytes used, 2917448 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)

Cisco2503#

IP Plus - c2500-is-l.12.2-8.t c2500-is-l.122-8.t.bin According to the Cisco website, some of the major features of this IOS are:BGP, BGP 4, BSTUN (Block Serial Tunneling), CDP (Cisco Discovery Protocol) Version 2, CGMP - Cisco Group Management Protocol, CNS Configuration Agent, Dynamic Host Control Protocol (DHCP), DLSw+, EGP, Enhanced IGRP (EIGRP), Frame Relay, HSRP - Hot Standby Router Protocol, HTTP Security, IGMP Version 3, IGRP, IP Routing, IPv6 (Internet Protocol Version 6), ISDN, MD5 File Validation, Mobile IP, Multicast BGP (MBGP), Multicast NAT, Multilink PPP, NAT - Network Address Translation, On Demand Routing (ODR), OSPF, PAD Subaddressing, Password Authentication Protocol (PAP), PPP, PPP over Frame Relay, RADIUS, Routing Information Protocol (RIP), Simple Network Management Protocol (SNMP), SNMP Version 3, Spanning Tree Protocol (STP) Extension, Stub IP Multicast Routing, STUN (Serial Tunnel), TACACS+, Transparent Bridging, Tunneling of Asynchronous Security Protocols, Virtual Private Dial-up Network (VPDN), VPN Tunnel Management, X.25

Cisco1602R#sh verCisco Internetwork Operating System Software
IOS (tm) 1600 Software (C1600-Y-M), Version 12.0(9), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 25-Jan-00 00:11 by bettyl
Image text-base: 0x02005000, data-base: 0x0246E5D8ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
ROM: 1600 Software (C1600-RBOOT-R), Version 12.0(3)T, RELEASE SOFTWARE (fc1) Cisco1602R uptime is 11 minutes
System restarted by reload
System image file is 1602 (68360) processor (revision C) with 7680K/512K bytes of memory.
Processor board ID 18341560, with hardware revision 00000003
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
On-board Switched 56K Line Interface.
System/IO memory with parity disabled
8192K bytes of DRAM onboard
System running from RAM
7K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read/Write)Configuration register is 0x2102Cisco1602R#sh flashPCMCIA flash directory:
File Length Name/status
1 2251855 c1600-y-mz.120-9.bin
[2251920 bytes used, 1942384 available, 4194304 total]
4096K bytes of processor board PCMCIA flash (Read/Write)Cisco1602R#

WS-C2924-XL-EN SwitchWS-C2924-XL-EN#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 13-Feb-07 15:27 by antonino
Image text-base: 0x00003000, data-base: 0x00352924

ROM: Bootstrap program is C2900XL boot loader

WS-C2924-XL-EN uptime is 15 minutes
System returned to ROM by power-on
System image file is WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory.
Processor board ID FAA0306J2TR, with hardware revision 0x01
Last reset from power-on

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
23 FastEthernet/IEEE 802.3 interface(s) Port 24 tested bad, all other ports tested operational.

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:50:80:6C:AD:40
Motherboard assembly number: 73-3382-04
Power supply part number: 34-0834-01
Motherboard serial number: FAA0305999J
Model revision number: A0
Model number: WS-C2924-XL-EN
System serial number: FAA0306J2TR
Configuration register is 0xF

WS-C2924-XL-EN#sh flash

Directory of flash:/

2 -rwx 1811903 Mar 01 1993 00:15:41 -rwx 8192 Mar 01 1993 00:15:42 e2rb.bin
4 drwx 704 Mar 01 1993 00:16:35 html
16 -rwx 109 Mar 01 1993 00:16:37 info
17 -rwx 109 Mar 01 1993 00:16:37 info.ver
18 -rwx 1002 Mar 01 1993 00:01:56 config.text

3612672 bytes total (671744 bytes Switch

Catalyst 1900 Management Console
Copyright (c) Cisco Systems, Inc. 1993-1999
All rights reserved.
Enterprise Edition Software
Ethernet Address: Number: 73-3121-03
PCA Serial Number: FAB031930GH
Model Number: WS-C1924-EN
System Serial Number: FAB0324U02A
Power Supply S/N: PHI0313002E
PCB Serial Number: user(s) now active on Management Console.

User Interface Menu

[M] Menus
[K] Command Line
[I] IP Configuration
[P] Console Password

Enter Selection: K

CLI session with the switch is open.
To end the CLI session, enter [Exit].

>sh ver
Cisco Catalyst 1900/2820 Enterprise Edition Software
Version V9.00.07
Copyright (c) Cisco Systems, Inc. 1993-1999
uptime is 0day(s) 01hour(s) 10minute(s) 51second(s)
cisco Catalyst 1900 (486sxl) processor with 2048K/1024K bytes of memory
Hardware board revision is 5
Upgrade Status: No upgrade currently in progress.
Config File Status: No configuration upload/download is in progress
27 Fixed Ethernet/IEEE 802.3 interface(s)
Base Ethernet Address: Catalyst 1900 - Main Menu

[C] Console Settings
[S] System
[N] Network Management
[P] Port Configuration
[A] Port Addressing
[D] Port Statistics Detail
[M] Monitoring
[V] Virtual LAN
[R] Multicast Registration
[F] Firmware
[I] RS-232 Interface
[U] Usage Summaries
[H] Help
[K] Command Line

[X] Exit Management Console

Catalyst 1900 - Firmware Configuration

----------------------- System Information FLASH: 1024K bytes
V9.00.07 : Enterprise Edition
Upgrade status:
No upgrade currently in progress.

----------------------- Settings [S] TFTP Server name or IP address
[F] Filename for firmware upgrades
[A] Accept upgrade transfer from other hosts Disabled

----------------------- Actions [U] System XMODEM upgrade [D] Download test subsystem (XMODEM)
[T] System TFTP upgrade [X] Exit to Main Menu

Catalyst 1900 - Virtual LAN Configuration

----------------------- Information VTP version: 1
Configuration revision: 0
Maximum VLANs supported locally: 1005
Number of existing VLANs: 5
Configuration last modified by: 0.0.0.0 at 00-00-0000 00:00:00

----------------------- Settings [N] Domain name
[V] VTP mode control [F] VTP pruning mode [O] VTP traps Enabled

----------------------- Actions [L] List VLANs [A] Add VLAN
[M] Modify VLAN [D] Delete VLAN
[E] VLAN Membership [S] VLAN Membership Servers
[T] Trunk Configuration [W] VTP password
[P] VTP Statistics [X] Exit to Main Menu

Enter Selection:

The winning bidder also has the option of purchasing a set of rack-mount brackets for the routers (8 items) and switches (4 items) for an additional $45.00. The Cisco 1602R Router does not require mounting brackets. Just let me know if you want the brackets included after the auction ends.

Thanks for looking at my auctions.

Payment Information:We are Paypal Verified Sellers and happily accept all types of Paypal payments with confirmed addresses ONLY!
When paying with Paypal, we will only ship to your confirmed address!We also gladly accept US Postal Money Orders or Cashier Checks.NO Personal Checks! We DO NOT accept Personal Checks!Payment is expected within 3 days of auction end.No Exceptions!

Shipping Information:Shipping and Handling: $110.00 flat rate for insured shipping with signature confirmation (this kit is heavy). – Continental US Only!Buyers address must be a physical address. We cannot ship to PO Boxes, APOs, FPOs or CFPOs!Will ship to Alaska and Hawaii but shipping will be higher. Please contact seller for a shipping quote.Will also ship to Canada, but shipping will be $45.00 extra.
Buyers in Canada are solely responsible for all duties and excise taxes etc. for full amount of purchase price.Due to the export restrictions imposed for the IOS types loaded on the routers, I will not ship outside of the US and Canada!

My shipping charges may seem high, but it's well worth it. Your kit will arrive in a sturdy, high quality cardboard shipping enclosure,
the equipment safely secured with bubble-wrap, taped and encapsulated with packaging peanuts.
I believe in packaging my kits in the same manner that I would like to receive an item.
There is nothing worse than opening a package you had been waiting for, only to find it contains broken items.

Shipping is normally within two business days after payment is confirmed. I will e-mail the winning bidder with the expected date of shipment,
then after shipment is made, the package tracking number.Due to the extremely low prices that we list these items on ebay, there is no local pickup allowed.Warranty Information:These items are tested and working 100%, and guaranteed operational in the configuration described at time of delivery. All units are pre-owned and may contain some cosmetic scratches, dents, cracks, sticker residue or missing emblems which does not affect the unit performance in any way. Any software or firmware licensing issues are the responsibility of the buyer.Thanks again for looking at my auctions!

Created using the FreeForm Builder at robshelp.com