Thunder K8SR (S2881)

Processor
• Dual µPGA 940-pin ZIF sockets
• Supports up to two AMD Opteron™ processors
• 128-bit DDR dual-channel memory controller
• (integrated in CPU)
• Supports Single and Dual Core processors Chipset
• AMD-8131™ HyperTransport™ PCI-X Tunnel
• AMD-8111™ HyperTransport™ I/O Hub
• Winbond™ W83627HF Super I/O ASIC
• Analog Devices ADT7463 Hardware Monitoring ICMemory
• 128-bit DDR memory bus
• Eight 184-pin 2.5-Volt DDR DIMM sockets
• Supports up to 32GB of Registered DDR
• Supports ECC type memory modules
• Supports DDR 266/333/400
• Supports Single/Dual/Quad Rank mem. modules
• Supported with Opteron 246 CPU's or higherExpansion Slots
• Two independent 64-bit PCI-X buses
• One 100/66/33 MHz (3.3-volt) PCI-X slots
- from PCI-X bridge A
• One 133/100/66/33 MHz (3.3-volt) PCI-X slot
• Total of two usable slotsIntegrated I/O
• One floppy connector support up to two drives
• Two 9-pin serial ports
- one connector and one header
• One 25-pin SPP/ECP/EPP parallel header
• Four USB 1.1 ports (two rear and two header)
• One 15-pin VGA connector
• PS/2 mouse and keyboard connectorsSystem Management
• Total of nine 3-pin fan headers
• Six fan headers with monitoring
• One 2-pin Chassis Intrusion header
• Temperature, voltage and fan monitoring
• Port 80h LED 7-segment displayIntegrated Enhanced IDE Controller
• Two IDE dual-drive ports for up to four
EIDE devices
• Supports for UDMA 133/100/66/33 IDE drives
and ATAPI devicesIntegrated LAN Controller
• Broadcom BCM5704C dual-channel GbE LAN
- Two RJ-45 LAN connectors with LEDs
- Connected to PCI-X Bridge A
• Two Front Panel LED headers

Integrated PCI Graphics
• ATI® RAGE™ XL 8MB PCI graphics controllerIntegrated SATA Controller
• Silicon Image Sil 3114 SATA controller
• Supports four-ch, SATA RAID (RAID 0, 1, 0+1)
• Total of four 7-pin SATA 1.0 connectors
• Supports up to four Serial ATA150 drivesIntegrated SCSI Controller (option)
• Adaptec 7902 U320 SCSI controller
• Two U320 68-pin SCSI connectors
• Connects to PCI-X Bridge A
• Adaptec ZCR support through Card Intelligent Platform Management Interface Header
• TYAN Server Management Daughter card
(optional) supports features listed below via
IPMI header (SMDC/TSO Support)
• QLogic™ Zircon Baseboard (BMC) based on powerful
• Tailored for IPMI highest 1.5 Spec.
• Supports KCS and BT styles
• Flexible Windows or Linux Management Solution
• Supports RMCP and SNMP protocols
• Supports ASF standard and EMP
• I2C serial multi-master controllers and UARTs
• Build-in IPMB connector
• Remote power on/off and reset
• AMI® BIOS 8.0 on 4Mbit LPC Flash ROM
• Supports ACPI 2.0 and SRAT
• Supports PXE via Ethernet, USB device boot
• SMBIOS 2.3.1, BBS 1.1 compliant
• Headless Operation via serial console redirect
and remote flash
• 48-bit LBA SupportForm Factor
• SSI EEB v3.0 footprint (12"x13"; fits many Rackmount chassis
• EPS12V/SSI (24pin + 8pin) power connectors
• Serial (one) and VGA (one) connectors
• Stacked USB 1.1 (two) connectors
• Stacked PS/2 keyboard and mouse connectors
• Two RJ-45 LAN connectors with LEDsRegulatory
• FCC Class B (DoC)
• European Community CE (DoC).

Tyan Thunder K8SR S2881UG2NR New

What-you-see-is-what-you-get! If you do not see it in the picture it is NOT includedAll of our used equipment is tested and fully functional.

Please contact we with any question BEFORE you bid.

When using Paypal we will only ship to confirmed addresses.

Payment made from un-confirmed accounts will be refunded and Item will be re-listed immediately

Payment is expected within 48 hours, weekends included. Paypal is open 24/7!

We ship all of our products sold on Ebay, Local pick-up is not available at this time.Warranty period is 30-day starting on the date of delivery andincludes weekends.

Shipping and Handling Fees for this item are non refundable.

A 15% restocking fee will be charged for all non-defective returns.An R.M.A NUMBER IS REQUIRED, for all returns. So please contact us if you have any problems.

If for any reason you are dissatisfied with a transaction, please contact us before you leave negative feedback if you would like the issue resolved.And lastly please DO NOT BID on my item if you don't agree with my terms and conditions.