This auction is for a Talkswitch 244vx VOIP small business phone system and (2) Talkswitch 9112i IP phones. This system is very easy to setup and use. The specifications of the system are:Analog trunks 2 VoIP trunks4 Analog extension interfaces 4 Extension capacity16: 4 analog or IP, 12 pure IP USB interface1 LAN interfaceRJ-45 Ethernet (10BaseT) Memory2 hours Memory expansion1, 2, 4.5 and 9 hour memory cards Music inputPhono jack (1/8" mono) or stored .wav file PA outputPhono jack (1/8" mono) or stored .wav file Power source120 VAC, 60 Hz — In / 16 VAC, 2.0 A — Out Power-failure line to extension jacksExtension 4 connects to Line 1
Analog extension interface Connector typeRJ-11, 2-pin Trunk typeLoop start Interface impedance600 ohms Loop range0–600 ohms Hook flash supportedYes On-hook voltage35 volts Off-hook loop voltage source35 volts Off-hook loop current23 mA to 40 mA Dial tone level-2.4 dBm Ringing voltage90 volts RMS Ringing frequency20 Hz – true sine wave Total ringing load5 REN
Analog trunks Connector typeRJ-11, 2-pin Trunk typeLoop start Interface impedanceConfigurable, 600 ohms, 600 complex, 900 ohms, 900 complex Ringing impedance3,900 ohms Ringing sensitivity45 volts RMS @ 20 Hz REN0.7B Longitudinal balance69 dB Signal level-10 dB Distinctive ring supportedYes Caller ID supportFSK, all lines
VoIP features • Embedded SIP server and user agents • Integrated registrar • Can use external SIP servers as required • RTP • G.711 µ-law/A-law, G.726 (32 Kbps), G.729a • G.168 echo cancellation • VAD, silence suppression • Adaptive jitter buffer • Packet loss concealment • Fax tone detection

Dimensions (H x W x L) Metric51.6 mm x 203.2 mm x 213.4 mm Imperial2.03" x 8" x 8.4"
Weight Metric0.67 kg Imperial1.46 lbs


FEATURES

• VoIP and traditional telephone lines
• Auto Attendants
• Voicemail
• Remote Extensions
• External IP Extensions
• Easy and IP phones
• Dial-By-Name Directory
• Voicemail to E-mail
• Music on Hold
• Call Cascade
• Ring Groups
• Uniform Call Distribution
• Call Queue
• Automatic Route Selection
• Toll Restriction
• Call Detail Record Logging
• Line Appearance (with TS-9133i and TS-480i phones)
• Multiple Language Prompts
• Call Forward
• Auto Fax Detection
• Call Conference
• Call Back/Call Bridge
• Mode Scheduling
• Call Hold/Transfer/Park
• Call Screening
• Intercom
• Call Pickup
• Distinctive Ring
• Public Announcement
• Remote Management
• LAN capability
• Free Software Upgrades

Requirements and recommendations:

* Requires a VoIP enabled TalkSwitch system and broadband Internet connection at both locations.

For configuration software 5.0: Windows Vista (32 bit) or Windows XP or Windows 2000 and minimum 256MB RAM, 160MB hard disk space and 800x600 screen resolution.

For configuration software 6.0: Windows Vista (32 bit): recommended 1 GHz or greater processor speed, 1 GB or greater RAM. 220 MB hard disk space and 1024x768 screen resolution.

Windows XP or Windows 2000: recommended 1 GHz or greater processor speed, 512 MB RAM. 220 MB hard disk space and 1024x768 screen resolution.

For VoIP operation: Broadband internet connection. VoIP calling to numbers outside of branch-to-branch TalkSwitch systems require subscriptions to compatible VoIP services.

Wiring: TalkSwitch usually requires no extra wiring beyond the standard infrastructure in most commercial and residential buildings. In rare cases, depending on your existing infrastructure and desired distribution of extensions, some re-wiring may be necessary. Consult your Authorized TalkSwitch Reseller or talk to a telephone systems and service professional in your area.

Telephone company services:
Some phone company services can enhance your TalkSwitch performance:
Caller ID is recommended but not required.
Hunt/Rollover/Busy Forwarding is recommended if you have more than one phone line connected to TalkSwitch.
Transfer and Clear frees a phone line after a call has been transferred to a remote extension.
3-way Calling allows you to use a single line to forward calls to remote extensions, conference calls and access call bridge. If you want the caller to hear music continuously while on hold, we do not recommend using this service.
Telephone Company Voicemail allows a caller to leave a message even if all lines become unavailable. We do not recommend using Call Waiting, because TalkSwitch can’t answer two calls on the same line. The second caller would be unable to access your auto attendants, extensions, voicemail and call cascade sequences.