The auction is for one QMBIX-10A frame in good condition with no broken clips. I have three more, one of which has one broken cable guide.

I also have a quantity of strips and designation strips, sold separately.

BIX is superior to the 110 or 66 conector commonly seen in the USA.

BIX (Building Industry Cross-connect) is part of a telephony cross-connect system (Integrated Building Distribution Network - IBDN) created in the 1970's by Nortel Networks. As a system, it consists of various sizes of punch-down blocks, cable distribution accessories (such as molded rings and strips), and a punch-down tool to terminate wires at the punch-down block. The BIX cross-connect system as a whole is certified for Category-5e. The BIX cross-connect system is primarily composed of two parts: the mounts, and the connectors.

BIX mounts are wall-mounted frames, generally built from 16 gauge steel. The frames feature a rectangular plastic backplate, and two plastic brackets that extend from either side of the backplate to fit between two and ten BIX connectors. The connectors are oriented horizontally on the mount. The BIX mounts are referred to as either '10A' or '10C'. The 10A frames will mount up to 10 connectors; the 10C frames will mount 2 connectors.

BIX connectors are rectangular punch-down blocks used to terminate up to 25 pairs. The connecters have a slip-in fitting which automatically strips the wire as it is punched down, eliminating the need for pre-stripping. BIX connectors also have a pair-splitter to facilitate fast arranging of wires on the punch-down block. BIX connectors are usually referred to as '1A' connectors, or "1As." Other BIX connectors are the 1A4 and 5A, BIX also has a 46DI block for data applications.

Because of some problems with the postage calculator DO NOT make payments until you have been contacted with the correct amount. Some shipping includes insurance but this may not always appear.

Canada Post Rate Finder

(Note: usually gives a higher price than Paypal shipping prices)