This item has been shown times.
You are buyiong 1 used working NTI ST-8U-R IU Rack KVM Switch Broadcast Command 8 Port10day warranty
loc: 275F
The information below is for info only.
NTI ST-8U KVM Switch Features & Applications
These Universal ST-xU Multi-platform KVM switches allow one keyboard, monitor and mouse to control up to 152 computers. Dedicated internal microprocessors emulate keyboard and mouse presence to each attached PC 100% of the time so all computers boot error-free.
- Control all network computers from one office.
- Improve manageability of your computer room - eliminate extra cables, monitors, keyboards and mice.
- Compatible with all PC, SUN and MAC (with ADB ports) computers, including HP9000, Silicon Graphics and IBM RS6000, SUN Ultra 5 and 10 and any SUN with a VGA or 13W3 video port.
- NEW NTI USB-SUN and USB-ADB Adapters allow you to connect USB-enabled SUN and MAC hosts directly to the switch.
- This switch can be powered down without causing host failures on SUN computers.
- Auto scan all computers to catch system failures early.
- Broadcast keystrokes to all computers for simultaneous shut-downs.
- Cascade smaller switches together as your network grows - up to 152 ports.
NTI ST-8U KVM Switch Compatibility
Keyboard
- Female 8 pin miniDIN connectors.
- User devices can be PS/2, SUN or MAC.
- Keyboard & mouse are hot-pluggable.
- MAC startup keys are supported on all platforms of input devices.
- SUN startup keys are supported on SUN and PS/2 input devices.
Mouse
- PS/2 mouse connectors to "Y" adapter cable with PS/2 keyboard.
- PS/2 mouse can be an Intellimouse, the wheel acts like a 3rd button for SUN.
- SUN 3-button mice are supported.
- MAC 1-button mice are supported. The second button of a PC mouse is emulated by holding down the COMMAND button while clicking.
Monitor-VGA
- Crisp & clear 1900x1200 resolution.
- Female 15 pin HD connectors.
- A multiscan VGA monitor is required to display the different video outputs from different platforms.
- Bandwidth is 150 MHz.
Hosts
- Any PS/2-compatibles including laptops, RS6000, SGI and HP9000.
- Any SUN, including new ULTRAs.
- All MACs with ADB ports, including MAC Duo Docks and MACs with dongle devices.
- Any USB-enabled SUN or MAC computer may be connected by using a USB-SUN or USB-ADB adapter.
Power
- 110 or 220 VAC at 50 or 60 Hz. via AC Adapter.
NTI ST-8U KVM Switch Control Methods
Buttons on
Front Panel
- Touch a button and be connected to a CPU or change modes of operation.
- LEDs indicate currently selected port and mode of operation.
- Hold any button in for more than 2 seconds and go into Scan Mode, Broadcast Mode or Command Mode.
Keyboard
- Type CTRL+`(accent) and go into Command Mode.
- Scan Mode, Broadcast Mode or Command Mode are available from keyboard.
Use a SUN monitor with 13W3 connector
For use with 13W3 SUN or VGA monitor
Optional-sold separately
- RS232 Control
- (OSD) On Screen Display
- USB to ADB Adapter
- USB to SUN Adapter
- Rackmount Option
- USB Port Option
Available on 2 port model
- Touch Screen Option
Available on 2 port model
- Dual Video Option
Available on 2 & 4 port models
- Audio Option
