This print server works great and I have replaced with a HP one.

Included are the Power supply and PSUS4 4-port switch/USB print server.

Thanks for looking!

----

Perfect working condition Linksys USB print server with four port switch and power supply.

This device is working pull. Working for any OS support LPD device.

To install this device, first reset the device then have printer USB cable connect to it. then:

Step 1:
Press and hold the Reset button of the PrintServer for three seconds and then release it. This will automatically send a diagnostic test page to the printer connected. If you’re having difficulties printing a diagnostic test page, click here.

Step 2:
Look for the IP address on the printed test page. If you are using a Linksys router with a default IP address of 192.168.1.1, the printserver should be getting an IP range of 192.168.1.x as well indicating that it is properly obtaining an IP address from the network

Then, use a browser connecting to that IP address to manage the PSUS4 US print server.

Once you have the proper IP address installed on the print server, you are ready to configure your PC. First make sure the printer driver is installed on your PC already. If not, please download the proper printer driver for your printer on your OS.

After printer drive installed on your PC, you can go to control panel to "Add Printer". Please select a local printer, then select a TCP/IP printer, you will then enter the IP address of the print server you had configured in step 2.

You are ready to go!