Mega Cisco CCNA CCNP Kit 2611 2-2610 2- 2924 64/16 T1!

This Mega Cisco CCNA CCNP Kit includes
2611 2-2610 64/16 2501 16/16 Routers
& 2-2924 Catalyst Switches
plus 1-WIC-1DSU-T1 Module!

These Cisco Routers and Catalyst Switches are loaded with some of the latest IOS images released by Cisco!

1 - Cisco 2611 with 1-NM-4A/S, 1-WIC-1T, 1-WIC-1DSU-56K, 64 Meg System Ram & 16 Meg System Flash running ADVANCED SECURITY Enterprise Version c2600-advsecurityk9-mz.124-17.bin! This 2600 IOS was just released by Cisco in September 2007!1 - Cisco 2610 with 1-WIC-T1, 1-WIC-1DSU-56K, 1-NM-4B-U, 64 Meg System Ram & 16 Meg System Flash running IP BASE Enterprise Version c2600-ipbasek9-mz.124-13.bin! This 2600 IOS was just released by Cisco in February 2007!1 - Cisco 2610 with 1-WIC-1T, WIC-1B-U, 64 Meg System Ram & 16 Meg System Flash running IP/FW/IDS PLUS IPSEC 3DES Enterprise Version c2600-ik9o3s3-mz.123-24.bin! This 2600 IOS was just released by Cisco in October 2007!1 - Cisco 2501 2 Serial Port Router loaded with 16 Meg Total System Ram and 16 Meg System Flash running Enterprise Version c2500-is-l.123-24! This 2500 IOS was just released by Cisco in October 2007!Plus2 - Cisco WS-C2924-XL-EN - 24 Port 10/100BaseT Switch running Enterprise Version 12.0(5)WC17! The latest Enterprise release from Cisco in February 2007!Cabling, Accessories and More! This Cisco Kit is Ready To Go!The Cisco IOS included with this kit supports Firewall Feature Set, IPSec Network Security,
IPSec Triple DES Encryption (3DES), IPv6 (Internet Protocol Version 6), MD5 File Validation,
Voice Over IP (VoIP) & more!These photos are of the actual units you will receive in this auction.

This is a great CCNA/CCNP kit that includes all the modules and some of the latest IOS software with the widest range of features and functions you need to complete your Cisco studies. Unlike other 2600 based kits listed on Ebay, this kit includes all the modules and pieces that you require for operation right out of the box. All items shown in the photos and listed in the description are what is included with this kit. You will not be disappointed with this Cisco Kit.This kit also includes 2 free CD's which contain Application Programs, CCNA and CCNP Training Materials including the new 640-802 Exam, CCNA Labs, Cisco Documentation (Cisco 2600 and 2500 Series Routers, Cisco 2900 and 1900 Switches, Cisco IOS, Software Commands, plus many, many other PDF's that cannot be mentioned here), Practice Tests, Study Guides, How To's, plus numerous additional IOS Images for use in your studies. These CD's are so jam-packed, they contain more than enough information for you to pass you CCNA/CCNP the first time. The information in these CD's alone, are worth more than the price of this auction, and will help give you the inside track for your Cisco training!

Purchased separately, this kit, with these features, cabling, and all the extras, would cost quite a lot more than the starting price (just check prices on Ebay). We do extensive testing on each item before listing, with each kit bench tested for 24 hours under live data transfers, and is guaranteed to be operational upon arrival. If an item is received DOA, just send it back and we will replace it (of course the returned item must match what was shipped). We have an vast inventory of Cisco 2500 and 2600 Series routers, plus 1900 and 2900 Series Switches. If you would like a specific kit configuration, send us a message and we will see if we can set it up for you. Please click on my link at the top of this auction page for a list on the Frequently Asked Questions we receive about Cisco Kits.Please check my 100% positive feedback from my satisfied buyers, then compare what is included here with other kits selling on Ebay, and you will see what a great deal this is

This kit Includes:1 - Cisco 2611 Router 64D/16F with one NM-4A/S 4 Port Serial Module, one WIC-1B-U module, and one WIC-T1 module, plus 2 10BaseT, 1 Console and 1 AUX port running c2600-advsecurityk9-mz.124-17(see routers output below).
1 - Cisco 2610 Router 64D/16F with one WIC-1DSU-56K Module, one WIC-1T 1 Port Serial Module and one NM-4B-U Module, plus 1 10BaseT, 1 Console and 1 AUX port running c2600-ipbasek9-mz.124-13 (see routers output below).
1 - Cisco 2610 Router 64D/16F with one WIC-1B-U Module, and one WIC-1T 1 Port Serial Module, plus 1 10BaseT, 1 Console and 1 AUX port running c2600-ik9o3s3-mz.123-24 (see routers output below).
1 - Cisco 2501 Router 16D/16F (2 Serial, 1 Ethernet AUI, 1 Console & 1 AUX port) running c2500-is-l.123-24 Enterprise Software (see routers output below).
2 - Cisco WS-C2924-XL-EN Catalyst Switch (24 10/100BaseT ports) running Enterprise Edition Software (C2900XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1). (WC17 is the latest Enterprise Edition Software release from Cisco). All ports are tested and operational.1 - CentreCOM 802.3 AUI Transceiver
4 - DB60 DCE/DTE Serial Crossover Cables
1 - Cisco DB-9 to RJ45 Console Cable
6 - Ethernet Straight Cables
2 - Ethernet Crossover Cables
6 - Power CablesPlus, the free CD's included with this kit contains Application Programs, CCNA Training Materials, CCNA Labs, Cisco Documentation (Routers, Switches, IOS, Software Commands, Tutorials, etc.), Practice Tests, Study Guides, How To's, plus Numerous additional IOS Images for your studies.The photos above are of the actual items you will receive in this auction.Each Cisco Router and Catalyst Switch has been professionally refurbished with all ports tested for functionality, configurations erased and all passwords removed. The cabling in this kit includes DCE/DTE Serial Crossover Cables which connect two router serial ports together without external circuits or modems, Ethernet Cables (both crossover and straight), Cisco Console Cable for connection to the Console port on each Cisco Router and Catalyst Switch, plus CentreCOM transceivers (the best for Cisco routers).The free companion study CD contains additonal 2500 and 2600 series IOS images and Cisco information, TFTP Server, How To's plus Cisco documentation for 2500 and 2600 series routers, 2900 and 1900 series switches and CCNA Study Guides.Plus the WIC-1B-U and 56K Modules can be configured for WAN technology (requires additional external equipment which is not included in this auction). Plus, the WS-C2924C-XL Series Catalyst Switch running Enterprise Edition Software gives you the extended switching command capabilities that you want for your advanced Cisco training. All ports on this switch have been tested for functionality, the configurations erased and all passwords removed.With Cisco 1900 Series Catalyst Switches, nothing less than Enterprise Edition Software installed is the requirement. The WS-C1924 Catalyst Switch is loaded with Enterprise Edition Software version 9.00.07 (the latest software), which gives you both Command Line Interface (CLI) plus Menu-Based user interface and has multiple Virtual Private Network (VPN) capabilities. All ports on each switch have been tested for functionality, the configurations erased and all passwords removed.

The specifications of this kit:

Cisco2611#sh verCisco IOS Software, C2600 Software (C2600-ADVSECURITYK9-M), Version 12.4(17), RELEASE SOFTWARE (fc1)
Technical Support: (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 07-Sep-07 16:05 by prod_rel_team

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Cisco2611 uptime is 1 minute
System returned to ROM by power-on
System image file is product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2611 (MPC860) processor (revision 2.3) with 61991K/3545K bytes of memory.
Processor board ID JAD03429EP3
M860 processor: part number 0, mask 49
2 Ethernet interfaces
2 Serial interfaces
4 Low-speed serial(sync/async) interfaces
32K bytes of NVRAM.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Cisco2611#sh flash

System flash directory:
File Length Name/status
1 16652884 c2600-advsecurityk9-mz.124-17.bin
[16652948 bytes used, 124264 available, 16777212 total]
16384K bytes of processor board System flash - ADVANCED SECURITY - Cisco IOS Certificate Server, Diffie-Hellman Group 5, Encrypted Kerberized Telnet, Encrypted Pre-shared Key, Firewall Feature Set, Firewall Intrusion Detection System, Intrusion Prevention System, IPSec Network Security, Password Authentication Protocol (PAP), Secure Shell SSH Versions 1 & 2 Server & Client Support, Security Device Manager (SDM), TACACS+, Trusted Root Certification Authority, VoIP Gateway Trunk and Carrier Based Routing Enhancements, VRF Aware Cisco IOS Firewall, VRRP MD5 Authentication

Cisco2611#sh diag
Slot 0:
C2611 2E Mainboard Port adapter, 4 ports
Port adapter is analyzed
Port adapter insertion time 00:01:26 ago
EEPROM contents at hardware discovery:
Hardware Revision : 2.3
PCB Serial Number : FFFF
Part Number : 73-2840-13
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : A0
Deviation Number : 0-16418
Product (FRU) Number : C2611 - 2E
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 92 41 02 03 C1 0B FF FF FF 46 46 46
0x10: 46 FF FF FF FF 82 49 0B 18 0D 04 00 81 00 00 00
0x20: 00 42 41 30 80 00 00 40 22 FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FFWIC Slot 0:
FT1 BT8360
Hardware revision 1.3 Board revision C0
Serial number 16811705 Part number 800-03279-03
FRU Part Number WIC-1DSU-T1=
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 2
EEPROM contents (hex):
0x20: 02 11 01 03 01 00 86 B9 50 0C CF 03 00 00 00 00
0x30: 60 00 00 00 99 10 27 01 FF FF FF FF FF FF FF FFWIC Slot 1:
DSU 56K
Hardware revision 1.0 Board revision A0
Serial number 33179303 Part number 74-0573-05
FRU Part Number WIC-1DSU-56K4=
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 0B 01 00 01 FA 46 A7 4A 02 3D 05 00 00 00 00
0x30: 50 00 00 00 05 03 04 01 FF FF FF FF FF FF FF FFSlot 1:
Sync/Async Port adapter, 4 ports
Port adapter is analyzed
Port adapter insertion time 00:01:28 ago
EEPROM contents at hardware discovery:
Hardware revision 1.0 Board revision H0
Serial number 18841020 Part number 800-01224-02
FRU Part Number NM-4A/S=
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x00: 01 24 01 00 01 1F 7D BC 50 04 C8 02 00 00 00 00
0x10: 88 52 69 00 00 03 03 17 FF FF FF FF FF FF FF FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FFCisco2611#

Cisco2610-2#sh verCisco IOS Software, C2600 Software (C2600-IPBASEK9-M), Version 12.4(13), RELEASE SOFTWARE (fc1)
Technical Support: (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 22-Feb-07 14:31 by prod_rel_team

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Cisco2610-2 uptime is 3 minutes
System returned to ROM by power-on
System image file is product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2610 (MPC860) processor (revision 2.2) with 59392K/6144K bytes of memory.
Processor board ID JAD04190EIV
M860 processor: part number 0, mask 49
1 Ethernet interface
2 Serial interfaces
4 ISDN Basic Rate interfaces
Integrated NT1's for 4 ISDN Basic Rate interfaces
32K bytes of NVRAM.
16384K bytes of processor board System flash (Read/Write)

Configuration register is - IP BASE - ADSL - Asymmetric Digital Subscriber Line Support, AIM-COMPR2-V2, DHCP Server/Client, Encrypted Vendor Specific Attributes, HTTP Security, IPSec Through Network Address Translation Support, Secure Shell SSH Versions 1 & 2 Server & Client Support, Security Device Manager (SDM), TACACS+, Trusted Root Certification Authority, VoIP Gateway Trunk and Carrier Based Routing Enhancements, VRRP MD5 Authentication, WCCP Versions 1 & 2

Cisco2610-2#sh diag
Slot 0:
C2610 1E Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 2.2
PCB Serial Number : FFFF
Part Number : 73-2839-11
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : A0
Deviation Number : 0-22418
Product (FRU) Number : C2610 - 1E
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 91 41 02 02 C1 0B FF FF FF 46 46 46
0x10: 46 FF FF FF FF 82 49 0B 17 0B 04 00 81 00 00 00
0x20: 00 42 41 30 80 00 00 57 92 FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FFWIC Slot 0:
Serial 1T WAN daughter card
Hardware revision 1.0 Board revision J0
Serial number 24067479 Part number 800-01514-01
FRU Part Number WIC-1T=
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 02 01 00 01 6F 3D 97 50 05 EA 01 00 00 00 00
0x30: 98 00 00 00 12 01 11 01 FF FF FF FF FF FF FF FFWIC Slot 1:
DSU 56K
Hardware revision 1.0 Board revision A0
Serial number 33178646 Part number 74-0573-05
FRU Part Number WIC-1DSU-56K4=
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 0B 01 00 01 FA 44 16 4A 02 3D 05 00 00 00 00
0x30: 50 00 00 00 05 03 05 01 FF FF FF FF FF FF FF FFSlot 1:
BRI (U) Port adapter, 4 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware revision 1.0 Board revision D0
Serial number 22680116 Part number 800-01238-06
FRU Part Number NM-4B-U=
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x00: 01 22 01 00 01 5A 12 34 50 04 D6 06 00 00 00 00
0x10: 68 00 00 00 00 12 27 17 FF FF FF FF FF FF FF FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FFCisco2610-2#

Cisco2610-1#sh verCisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(24), RELEASE SOFTWARE (fc4)
Technical Support: (c) 1986-2007 by cisco Systems, Inc.
Compiled Thu 18-Oct-07 14:26 by stshen
Image text-base: 0x80008098, data-base: 0x81A1E1E8

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Cisco2610-1 uptime is 2 hours, 25 minutes
System returned to ROM by power-on
System image file is product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found you require further assistance please contact us by sending email to
export@cisco.com.

cisco 2610 (MPC860) processor (revision 0x203) with 56320K/9216K bytes of memory.
Processor board ID JAD042708GP (2755067674)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is - IP/FW/IDS PLUS IPSEC 3DES - Address Resolution Protocol (ARP), ADSL - Asymmetric Digital Subscriber Line Support, BSTUN (Block Serial Tunneling), Cisco IOS Telephony Service (ITS) Version 2.1, DHCP Server/Client, Diffie-Hellman Group 5, Firewall Feature Set, HTTP Security, IPSec Network Security, IPSec Triple DES Encryption (3DES), IPv6 (Internet Protocol Version 6), MD5 File Validation, Mobile IP, MS-CHAP Versions 1 & 2, NAT - Network Address Translation, Secure Shell SSH Version 1 Integrated Client, Secure Shell SSH Version 1 Server Support, TACACS+, Voice Over IP (VoIP)

Cisco2610-1#sh diag
Slot 0:
C2610 1E Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 2.3
PCB Serial Number : JAD042708GP (2755067674)
Part Number : 73-2839-13
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : C0
Deviation Number : 0-0
Product (FRU) Number : C2610 - 1E
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 91 41 02 03 C1 18 4A 41 44 30 34 32
0x10: 37 30 38 47 50 20 28 32 37 35 35 30 36 37 36 37
0x20: 34 29 82 49 0B 17 0D 04 00 81 00 00 00 00 42 43
0x30: 30 80 00 00 00 00 FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FFWIC Slot 0:
Serial 1T WAN daughter card
Hardware revision 1.0 Board revision H0
Serial number 15660687 Part number 800-01514-01
FRU Part Number WIC-1T=Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 02 01 00 00 EE F6 8F 50 05 EA 01 00 00 00 00
0x30: 88 00 00 00 99 09 03 01 FF FF FF FF FF FF FF FFWIC Slot 1:
BRI U - 2091 WAN daughter card
Hardware revision 4.0 Board revision A0
Serial number 19628536 Part number 800-01834-03
FRU Part Number WIC-1B-U=Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 09 04 00 01 2B 81 F8 50 07 2A 03 00 00 00 00
0x30: 50 01 37 00 00 05 08 01 FF FF FF FF FF FF FF FFCisco2610-1#

Cisco2501#sh verCisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(24), RELEASE SOFTWARE (fc4)
Technical Support: (c) 1986-2007 by cisco Systems, Inc.
Compiled Thu 18-Oct-07 13:41 by stshen
Image text-base: 0x0307E1D8, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)

Cisco2501 uptime is 33 minutes
System returned to ROM by reload
System image file is 2500 (68030) processor (revision N) with 14336K/2048K bytes of memory.
Processor board ID 10406096, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

Cisco2501#sh flash

System flash directory:
File Length Name/status
1 16334776 c2500-is-l.123-24.bin
[16334840 bytes used, 442372 available, 16777212 total]
16384K bytes of processor board System flash (Read - IP Plus - Address Resolution Protocol (ARP), DHCP Server, HTTP Security, IPSec Through Network Address Translation Support, IPv6 (Internet Protocol Version 6), MD5 File Validation, NAT - Network Address Translation, RADIUS, STUN (Serial Tunnel), TACACS+, VPN Tunnel Management

WS-C2924-XL-EN Switch #1WS-C2924-XL-EN#sh verCisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 13-Feb-07 15:27 by antonino
Image text-base: 0x00003000, data-base: 0x00352924

ROM: Bootstrap program is C2900XL boot loader

WS-C2924-XL-EN uptime is 3 minutes
System returned to ROM by power-on
System image file is WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory.
Processor board ID FAA0306J0WH, with hardware revision 0x01
Last reset from power-on

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:50:80:49:74:00
Motherboard assembly number: 73-3382-04
Power supply part number: 34-0834-01
Motherboard serial number: FAA03049LXM
Model revision number: A0
Model number: WS-C2924-XL-EN
System serial number: FAA0306J0WH
Configuration register is 0xF

WS-C2924-XL-EN#sh flash

Directory of flash:/

2 -rwx 1811903 Mar 01 1993 00:24:11 -rwx 8192 Mar 01 1993 00:24:12 e2rb.bin
4 drwx 704 Mar 01 1993 00:25:04 html
16 -rwx 109 Mar 01 1993 00:25:06 info
17 -rwx 109 Mar 01 1993 00:25:06 info.ver
18 -rwx 1002 Mar 01 1993 00:14:48 config.text

3612672 bytes total (671744 bytes Switch #2

WS-C2924-XL-EN#sh verCisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 13-Feb-07 15:27 by antonino
Image text-base: 0x00003000, data-base: 0x00352924

ROM: Bootstrap program is C2900XL boot loader

WS-C2924-XL-EN uptime is 0 minutes
System returned to ROM by reload
System image file is WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory.
Processor board ID FAA0319K0G2, with hardware revision 0x01
Last reset from warm-reset

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:D0:58:6D:98:80
Motherboard assembly number: 73-3382-04
Power supply part number: 34-0834-01
Motherboard serial number: FAA03129F2V
Power supply serial number: DAB031308P1
Model revision number: A0
Model number: WS-C2924-XL-EN
System serial number: FAA0319K0G2
Configuration register is 0xF

WS-C2924-XL-EN#sh flash

Directory of flash:/

2 -rwx 1811903 Mar 01 1993 00:07:37 -rwx 8192 Mar 01 1993 00:07:38 e2rb.bin
4 drwx 704 Mar 01 1993 00:08:39 html
16 -rwx 109 Mar 01 1993 00:08:41 info
17 -rwx 109 Mar 01 1993 00:08:41 info.ver
18 -rwx 1002 Mar 01 1993 00:01:30 config.text

3612672 bytes total (671744 bytes free)
WS-C2924-XL-EN#

The winner has the option of purchasing rack-mount brackets for the routers (8 items) and switches (4 items) for an additional $45.00. Just let me know if you want the brackets included after the auction ends.

Payment Information:We are Paypal Verified Sellers and happily accept all types of Paypal payments with confirmed addresses ONLY!
When paying with Paypal, we will only ship to your confirmed address!We also gladly accept US Postal Money Orders or Cashier Checks.NO Personal Checks! We DO NOT accept Personal Checks!Payment is expected within 3 days of auction end.No Exceptions!

Shipping Information:Continental US Shipments - Insured shipping with Signature Confirmation is $85.00 flat rate (this kit is heavy).Buyers address must be a physical address. We cannot ship to PO Boxes, APOs, FPOs or CFPOs!Will ship to Alaska and Hawaii but shipping will be higher. Please contact the seller for a shipping quote.Canada Shipments - Insured Priority Mail® International shipping to Canada with Return Receipt is $150.00.
Buyers in Canada are solely responsible for all duties and excise taxes etc. for full amount of purchase price.Due to the export restrictions imposed for the IOS types loaded on the routers, I will not ship outside of the US and Canada!My shipping charges may seem high, but it's well worth it. Your kit will arrive in a sturdy, high quality cardboard shipping enclosure,
the equipment safely secured with bubble-wrap, taped and encapsulated with packaging peanuts.
I believe in packaging my kits in the same manner that I would like to receive this item from a seller.Shipping is normally within two business days after payment is confirmed. I will e-mail the winning bidder with the expected
date of shipment, then after shipment is made, I will e-mail the winning bidder the package tracking number with complete tracking information.Due to the extremely low prices that we list these items on ebay, there is no local pickup allowed.Warranty Information:

These items are tested and working 100%, and guaranteed operational in the configuration described at time of delivery. All units are pre-owned and may contain some cosmetic scratches, dents, cracks, sticker residue or missing emblems which does not affect the unit performance in any way..

Thanks again for looking at my auctions!

Created using the FreeForm Builder at robshelp.com