Lot 3 Juniper Networks EX4200-48T 750-033063 48-Port Gigabit Switch 8-port PoE For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

---

Lot 3 Juniper Networks EX4200-48T 750-033063 48-Port Gigabit Switch 8-port PoE:
$524.99

Lot 3 Juniper Networks EX4200-48T 750-033063 48-Port Gigabit Switch 8-port PoEUp for sale in this sale is a lot of 3 used Juniper EX4200-48T 48 port switches. These have been defaulted and tested to be in good working order. They will come with a 14-day hardware warranty which will start upon the date of arrival. They show signs of wear from transportation. These switches have 48 gigabit ports on them. Ports 0-7 are PoE capable. Each switch has a 320W power supply in it. The cover blanks are missing for the expansion module bays. It is more of a cosmetic issue, but worth pointing out. This sale WILL NOT INCLUDE any cables, cords, expansion bay blanks, or any other accessories not pictured. I will not be responsible for compatibility or setup issues. Pictures are of the actual item being sold. If it isn\'t pictured then it isn\'t included.NOTE: Login is \"root\" No password is setup.

Questions are encouraged and don’t forget to check out my other sales.

Also don\'t forget to check out my About Me page.Free shipping is only for the continental US States. Free shipping is not available for P.O. Boxes, Alaska, Hawaii, or Puerto Rico sorry. Shipping is not available for APO/FPO boxes sorry.In order to help me keep my prices low and shipping free, feel free to leave a five star DSR rating. If you feel I don’t deserve five stars feel free to let me know how I can improve future transactions.
GSP 52LB 23x23x13Swtich F1U-Boot 1.1.6 (Jul 5 2012 - 11:58:22)Board: EX4200-48T 3.12
EPLD: Version 6.0 (0x85)
DRAM: Initializing (1024 MB)
FLASH: 8 MBFirmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder greteth, Thu Jul 5 11:29:34 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s1:
Loading /boot/defaults/loader.conf
/kernel data=0xa9cc74+0xb01c4 syms=[0x4+0x904b0+0x4+0xd3a0f]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R12.4 #0: 2016-01-20 04:27:51 UTC
builder re-use a leaf (all_slot_serialid)!
Timecounter \"decrementer\" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 memory = 1047527424 (999 MB)
avail memory = 1025544192 (978 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <PPC e500 Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocp bus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xf ef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpb us0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpb us0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale 8533 Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff0000 00-0xffffffff irq 22 on ocpbus0
cb fpga: un-supported RE/board:39
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:39
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on o cpbus0
tsec0: hardware MAC address 5c:5e:ab:7b:2c:ff
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf00 00000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0af irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xa4000000-0xa40fffff,0x a0000000-0xa3ffffff irq 20 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef09000-0xfef09f irq 41 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xac000000-0xac0fffff,0x a8000000-0xabffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
pcib5: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bf irq 43 on ocpbus0
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
mpfe2: <Juniper EX-series Packet Forwarding Engine> mem 0xb4000000-0xb40fffff,0x b0000000-0xb3ffffff irq 19 at device 0.0 on pci6
mpfe_adcr_shadow_alloc: allocated idx: 2
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 43 ..
bmeb: bmeb_lib_init done 0x82b5a800, addr 0x80a9e128
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
Kernel thread \"wkupdaemon\" (pid 42) exited prematurely.
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s1a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-powerpc-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jkernel-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jpfe-ex42x package on /dev/md10...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex42x-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md12...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md14...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md16...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R12.4 signed by PackageProduction_12_3_0
Executing reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27271 free (23 frags, 3406 blocks, 0.0% fragmentation)
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 61760 free (136 frags, 7703 blocks, 0.2% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
savecore: Reboot reason(s): 0x2: watchdog
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188839 free (23 frags, 23602 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31645 free (29 frags, 3952 blocks, 0.1% fragmentation)
rm: /var/etc/pam.conf: Operation not permitted
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file=\'/sbin/kats/cannot-exec\' fsid=76 fileid =51404 gen=1 uid=0 pid=541
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo the EX-series platform NETPFE netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfe if_vcpkld peertyp e: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES : net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
starting local daemons:set cores for group access
.
Wed Jan 20 08:31:27 UTC 2016
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27000 free (16 frags, 3373 blocks, 0.0% fragmentation)Amnesiac (ttyu0)login: root--- JUNOS 12.3R12.4 built 2016-01-20 04:27:51 UTC
root@:RE:0% cli
{master:0}
root> show system alarms
No alarms currently active{master:0}
root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis BP0211187649 EX4200-48T
Routing Engine 0 REV 12 750-033063 BP0211187649 EX4200-48T, 8 POE
FPC 0 REV 12 750-033063 BP0211187649 EX4200-48T, 8 POE
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 48x 10/100/1000 Base-T
Power Supply 0 REV 05 740-020957 AT0511121374 PS 320W AC
Fan Tray Fan Tray{master:0}
root> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 Absent
Fans FPC 0 Fan 1 OK Spinning at full speed
FPC 0 Fan 2 OK Spinning at full speed
FPC 0 Fan 3 OK Spinning at full speed{master:0}
root> show ex4200-48t
JUNOS Base OS boot [12.3R12.4]
JUNOS Base OS Software Suite [12.3R12.4]
JUNOS Kernel Software Suite [12.3R12.4]
JUNOS Crypto Software Suite [12.3R12.4]
JUNOS Online Documentation [12.3R12.4]
JUNOS Enterprise Software Suite [12.3R12.4]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R12.4]
JUNOS Routing Software Suite [12.3R12.4]
JUNOS Web Management [12.3R12.4]
JUNOS FIPS mode utilities [12.3R12.4]{master:0}
root>Switch F2U-Boot 1.1.6 (Jul 5 2012 - 11:58:22)Board: EX4200-48T 3.13
EPLD: Version 6.0 (0x85)
DRAM: Initializing (1024 MB)
FLASH: 8 MBFirmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder greteth, Thu Jul 5 11:29:34 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s1:
Loading /boot/defaults/loader.conf
/kernel data=0xa9cc74+0xb01c4 syms=[0x4+0x904b0+0x4+0xd3a0f]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R12.4 #0: 2016-01-20 04:27:51 UTC
builder re-use a leaf (all_slot_serialid)!
Timecounter \"decrementer\" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 memory = 1047527424 (999 MB)
avail memory = 1025544192 (978 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <PPC e500 Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocp bus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xf ef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpb us0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpb us0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale 8533 Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff0000 00-0xffffffff irq 22 on ocpbus0
cb fpga: un-supported RE/board:39
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:39
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on o cpbus0
tsec0: hardware MAC address 78:19:f7:86:19:7f
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf00 00000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0af irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xa4000000-0xa40fffff,0x a0000000-0xa3ffffff irq 20 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef09000-0xfef09f irq 41 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xac000000-0xac0fffff,0x a8000000-0xabffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
pcib5: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bf irq 43 on ocpbus0
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
mpfe2: <Juniper EX-series Packet Forwarding Engine> mem 0xb4000000-0xb40fffff,0x b0000000-0xb3ffffff irq 19 at device 0.0 on pci6
mpfe_adcr_shadow_alloc: allocated idx: 2
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 43 ..
bmeb: bmeb_lib_init done 0x82b5a800, addr 0x80a9e128
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
Kernel thread \"wkupdaemon\" (pid 42) exited prematurely.
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s1a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-powerpc-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jkernel-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jpfe-ex42x package on /dev/md10...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex42x-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md12...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md14...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md16...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R12.4 signed by PackageProduction_12_3_0
Executing reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27271 free (15 frags, 3407 blocks, 0.0% fragmentation)
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 61966 free (182 frags, 7723 blocks, 0.3% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
savecore: Reboot reason(s): 0x2: watchdog
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188839 free (39 frags, 23600 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31645 free (29 frags, 3952 blocks, 0.1% fragmentation)
rm: /var/etc/pam.conf: Operation not permitted
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file=\'/sbin/kats/cannot-exec\' fsid=76 fileid =51404 gen=1 uid=0 pid=541
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo the EX-series platform NETPFE netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfe if_vcpkld peertyp e: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES : net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
starting local daemons:set cores for group access
.
Wed Jan 20 09:15:29 UTC 2016
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27271 free (23 frags, 3406 blocks, 0.0% fragmentation)Amnesiac (ttyu0)login: root--- JUNOS 12.3R12.4 built 2016-01-20 04:27:51 UTC
root@:RE:0% cli
{master:0}
root> show system alarms
No alarms currently active{master:0}
root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis BP0211222208 EX4200-48T
Routing Engine 0 REV 13 750-033063 BP0211222208 EX4200-48T, 8 POE
FPC 0 REV 13 750-033063 BP0211222208 EX4200-48T, 8 POE
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 48x 10/100/1000 Base-T
Power Supply 0 REV 05 740-020957 AT0511171386 PS 320W AC
Fan Tray Fan Tray{master:0}
root> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 Absent
Temp FPC 0 CPU OK 44 degrees C / 111 degrees F
FPC 0 EX-PFE1 OK 50 degrees C / 122 degrees F
FPC 0 EX-PFE2 OK 51 degrees C / 123 degrees F
FPC 0 EX-PFE3 OK 50 degrees C / 122 degrees F
FPC 0 GEPHY Front Left OK 32 degrees C / 89 degrees F
FPC 0 GEPHY Front Middle OK 35 degrees C / 95 degrees F
FPC 0 GEPHY Front Right OK 32 degrees C / 89 degrees F
FPC 0 Uplink Conn OK 34 degrees C / 93 degrees F
Fans FPC 0 Fan 1 OK Spinning at normal speed
FPC 0 Fan 2 OK Spinning at normal speed
FPC 0 Fan 3 OK Spinning at normal speed{master:0}
root> show ex4200-48t
JUNOS Base OS boot [12.3R12.4]
JUNOS Base OS Software Suite [12.3R12.4]
JUNOS Kernel Software Suite [12.3R12.4]
JUNOS Crypto Software Suite [12.3R12.4]
JUNOS Online Documentation [12.3R12.4]
JUNOS Enterprise Software Suite [12.3R12.4]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R12.4]
JUNOS Routing Software Suite [12.3R12.4]
JUNOS Web Management [12.3R12.4]
JUNOS FIPS mode utilities [12.3R12.4]{master:0}
root>Switch F3U-Boot 1.1.6 (Jul 5 2012 - 11:58:22)Board: EX4200-48T 3.13
EPLD: Version 6.0 (0x85)
DRAM: Initializing (1024 MB)
FLASH: 8 MBFirmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builder greteth, Thu Jul 5 11:29:34 UTC 2012)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0
Loading /boot/defaults/loader.conf
/kernel data=0xa8c580+0xb0508 syms=[0x4+0x8f950+0x4+0xd2741]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R3.4 #0: 2013-06-14 00:08:02 UTC
builder re-use a leaf (all_slot_serialid)!
Timecounter \"decrementer\" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 memory = 1047527424 (999 MB)
avail memory = 1025544192 (978 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <PPC e500 Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocp bus0
memctl0: <mpc85xx memory ECC monitor> iomem 0xfef20000-0xfef20e5b,0xfef02000-0xf ef02e5b irq 32,34 on ocpbus0
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpb us0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpb us0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: <Freescale 8533 Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff0000 00-0xffffffff irq 22 on ocpbus0
cb fpga: un-supported RE/board:39
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:39
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on o cpbus0
tsec0: hardware MAC address 78:19:f7:86:34:ff
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf00 00000-0xf3ffffff on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0af irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem 0xa4000000-0xa40fffff,0x a0000000-0xa3ffffff irq 20 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef09000-0xfef09f irq 41 on ocpbus0
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xac000000-0xac0fffff,0x a8000000-0xabffffff irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
pcib5: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bf irq 43 on ocpbus0
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
mpfe2: <Juniper EX-series Packet Forwarding Engine> mem 0xb4000000-0xb40fffff,0x b0000000-0xb3ffffff irq 19 at device 0.0 on pci6
mpfe_adcr_shadow_alloc: allocated idx: 2
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 43 ..
bmeb: bmeb_lib_init done 0x82b5a800, addr 0x80a8da08
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread \"wkupdaemon\" (pid 42) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-powerpc-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jkernel-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jpfe-ex42x package on /dev/md10...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex42x-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md12...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md14...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R3.4 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md16...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R3.4 signed by PackageProduction_12_3_0
Executing reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 36270 free (22 frags, 4531 blocks, 0.0% fragmentation)
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 61967 free (103 frags, 7733 blocks, 0.2% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
savecore: Reboot reason(s): 0x2: watchdog
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188839 free (23 frags, 23602 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31646 free (30 frags, 3952 blocks, 0.1% fragmentation)
ln: /etc/ssh/ssh: Read-only file system
ln: //usr/lib/render/libjdhcp-render.so: Read-only file system
ln: //usr/lib/render/libsubinfo-render.so: Read-only file system
ln: //usr/sbin/httpd-gk: Read-only file system
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no fingerprint for file=\'/sbin/kats/cannot-exec\' fsid=76 fileid=51404 uid=0 pid=543
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfe if_vcpkld peertyp
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:set cores for group access
.
Fri Jun 14 03:12:56 UTC 2013
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 36778 free (26 frags, 4594 blocks, 0.0% fragmentation)Amnesiac (ttyu0)login: rootLogging to master
.
--- JUNOS 12.3R3.4 built 2013-06-14 00:08:02 UTC
root@:RE:0% cliBroadcast Message from root
(no tty) at 3:13 UTC...ALERT:Auto-image upgrade will start. This can terminate config CLI sess
ion(s). Modified configuration will be lost. To stop Auto-image, in CLI do the
following: \'edit; delete chassis auto-image-upgrade; commit\'.{master:0}
root> show system alarms
No alarms currently active{master:0}
root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis BP0211222276 EX4200-48T
Routing Engine 0 REV 13 750-033063 BP0211222276 EX4200-48T, 8 POE
FPC 0 REV 13 750-033063 BP0211222276 EX4200-48T, 8 POE
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 48x 10/100/1000 Base-T
Power Supply 0 REV 05 740-020957 AT0511172287 PS 320W AC
Fan Tray Fan Tray{master:0}
root> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 Absent
Fans FPC 0 Fan 1 Testing
FPC 0 Fan 2 Testing
FPC 0 Fan 3 Testing{master:0}
root> show ex4200-48t
JUNOS Base OS boot [12.3R3.4]
JUNOS Base OS Software Suite [12.3R3.4]
JUNOS Kernel Software Suite [12.3R3.4]
JUNOS Crypto Software Suite [12.3R3.4]
JUNOS Online Documentation [12.3R3.4]
JUNOS Enterprise Software Suite [12.3R3.4]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R3.4]
JUNOS Routing Software Suite [12.3R3.4]
JUNOS Web Management [12.3R3.4]
JUNOS FIPS mode utilities [12.3R3.4]{master:0}
root>

---

---

---

Related Items:

LOT 10 4GB 40GB (10x 4GB) Assorted DDR3L-1600 PC3L-12800 Laptop SODIMM RAM

$15.99

---

Lot of 50 Mixed Major Brands DDR3 4GB PC3/PC3L-12800S SODIMM RAM Laptop Memory

$84.99

---

Lot of 10 4GB PC3-12800 Laptop Ram Mixed Brands

$16.99

---

Documentation

• AIX Local Security Checks
• Backdoors
• CentOS Local Security Checks
• CGI abuses
• CISCO
• Databases
• Debian Local Security Checks
• Default Unix Accounts
• Denial of Service
• Fedora Local Security Checks
• Finger abuses
• Firewalls
• FreeBSD Local Security Checks