Lot 3 Juniper Networks EX3200-24T 750-021261 24-Port Gigabit Switch 8-port PoE For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

---

Lot 3 Juniper Networks EX3200-24T 750-021261 24-Port Gigabit Switch 8-port PoE:
$239.99

Lot 3 Juniper Networks EX3200-24T 750-021261 24-Port Gigabit Switch 8-port PoEUp for sale in this sale is a lot of 3 used Juniper EX3200-24T 24 port switches. These have been defaulted and tested to be in good working order. They will come with a 14-day hardware warranty which will start upon the date of arrival. They show more than normal signs of wear from transportation. These switches have 24 gigabit ports on them. Ports 0-7 are PoE capable. Each switch has a 320W power supply in it. The cover blanks are missing for the expansion module bays. It is more of a cosmetic issue, but worth pointing out. This sale WILL NOT INCLUDE any cables, cords, expansion bay blanks, or any other accessories not pictured. I will not be responsible for compatibility or setup issues. Pictures are of the actual item being sold. If it isn\'t pictured then it isn\'t included.NOTE: Login is \"root\" No password is setup.
Feel free to check out my other listings for more exciting items.
Free shipping is only for the continental US States. Free shipping is not available for P.O. Boxes, Alaska, Hawaii, or Puerto Rico sorry. Shipping is not available for APO/FPO boxes sorry.
Switch A1U-Boot 1.1.6 (Mar 26 2011 - 04:42:33)Board: EX3200-24T 2.15
EPLD: Version 6.0 (0x85)
DRAM: Initializing (512 MB)
FLASH: 8 MBFirmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(hmerge svl-junos-pool130.juniper.net, Sat Mar 26 02:46:28 PDT 2011)
Memory: 512MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0xa9cc74+0xb01c4 syms=[0x4+0x904b0+0x4+0xd3a0f]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R12.4 #0: 2016-01-20 04:27:51 UTC
builder re-use a leaf (all_slot_serialid)!
Timecounter \"decrementer\" frequency 37500000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 memory = 510656512 (487 MB)
avail memory = 499212288 (476 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <PPC e500 Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem irq 32,34 on ocpbus0
ECC not enabled to report errors 0xc3000000
device_attach: memctl0 attach returned 6
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
lbc0: <Freescale 8533 Local Bus Controller> iomem irq 22 on ocpbus0
cb fpga: un-supported RE/board:32
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:32
syspld0 iomem 0xff000000-0xff00ffff on lbc0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 00:26:88:76:39:3f
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem irq 18 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 36 ..
bmeb: bmeb_lib_init done 0x81fcc800, addr 0x80a9e128
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread \"wkupdaemon\" (pid 42) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted fips-mode-powerpc package on /dev/md1...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-powerpc-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md3...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jkernel-ex package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jpfe-ex42x package on /dev/md5...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex42x-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md7...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R12.4 signed by PackageProduction_12_3_0
Executing reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27271 free (23 frags, 3406 blocks, 0.0% fragmentation)
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 60349 free (237 frags, 7514 blocks, 0.4% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
savecore: Reboot reason(s): 0x2: watchdog
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 173216 free (40 frags, 21647 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31630 free (22 frags, 3951 blocks, 0.1% fragmentation)
rm: /var/etc/pam.conf: Operation not permitted
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file=\'/sbin/kats/cannot-exec\' fsid=73 fileid=51404 gen=1 uid=0 pid=469
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo
kld netpfe drv:Loading the EX-series platform NETPFE module
ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
starting local daemons:set cores for group access
.
Wed Jan 20 07:12:05 UTC 2016
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27271 free (15 frags, 3407 blocks, 0.0% fragmentation)Amnesiac (ttyu0)login: root--- JUNOS 12.3R12.4 built 2016-01-20 04:27:51 UTCBroadcast Message from root
(no tty) at 7:12 UTC...ALERT:Auto-image upgrade will start. This can terminate config CLI sess
ion(s). Modified configuration will be lost. To stop Auto-image, in CLI do the
following: \'edit; delete chassis auto-image-upgrade; commit\'.
root@:RE:0% cli
root> show system alarms
No alarms currently activeroot> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis BH0209418024 EX3200-24T
Routing Engine 0 REV 15 750-021261 BH0209418024 EX3200-24T, 8 POE
FPC 0 REV 15 750-021261 BH0209418024 EX3200-24T, 8 POE
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 24x 10/100/1000 Base-T
Power Supply 0 REV 04 740-020957 AT0509188580 PS 320W AC
Fan Tray Fan Trayroot> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 Absent
Fans FPC 0 Fan 1 Testingroot> show version
Model: ex3200-24t
JUNOS Base OS boot [12.3R12.4]
JUNOS Base OS Software Suite [12.3R12.4]
JUNOS Kernel Software Suite [12.3R12.4]
JUNOS Crypto Software Suite [12.3R12.4]
JUNOS Online Documentation [12.3R12.4]
JUNOS Enterprise Software Suite [12.3R12.4]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R12.4]
JUNOS Routing Software Suite [12.3R12.4]
JUNOS Web Management [12.3R12.4]
JUNOS FIPS mode utilities [12.3R12.4]root>Switch A2U-Boot 1.1.6 (Mar 26 2011 - 04:42:33)Board: EX3200-24T 2.15
EPLD: Version 6.0 (0x85)
DRAM: Initializing (512 MB)
FLASH: 8 MBFirmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(hmerge svl-junos-pool130.juniper.net, Sat Mar 26 02:46:28 PDT 2011)
Memory: 512MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0xa9cc74+0xb01c4 syms=[0x4+0x904b0+0x4+0xd3a0f]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R12.4 #0: 2016-01-20 04:27:51 UTC
builder re-use a leaf (all_slot_serialid)!
Timecounter \"decrementer\" frequency 37500000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 memory = 510656512 (487 MB)
avail memory = 499212288 (476 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <PPC e500 Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem irq 32,34 on ocpbus0
ECC not enabled to report errors 0xc3000000
device_attach: memctl0 attach returned 6
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
lbc0: <Freescale 8533 Local Bus Controller> iomem irq 22 on ocpbus0
cb fpga: un-supported RE/board:32
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:32
syspld0 iomem 0xff000000-0xff00ffff on lbc0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 00:26:88:63:81:bf
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem irq 18 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 36 ..
bmeb: bmeb_lib_init done 0x81fcc800, addr 0x80a9e128
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread \"wkupdaemon\" (pid 42) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted fips-mode-powerpc package on /dev/md1...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-powerpc-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md3...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jkernel-ex package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jpfe-ex42x package on /dev/md5...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex42x-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md7...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R12.4 signed by PackageProduction_12_3_0
Executing reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27271 free (23 frags, 3406 blocks, 0.0% fragmentation)
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 60428 free (252 frags, 7522 blocks, 0.4% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
savecore: Reboot reason(s): 0x2: watchdog
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188841 free (25 frags, 23602 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31630 free (30 frags, 3950 blocks, 0.1% fragmentation)
rm: /var/etc/pam.conf: Operation not permitted
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file=\'/sbin/kats/cannot-exec\' fsid=73 fileid=51404 gen=1 uid=0 pid=469
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo
kld netpfe drv:Loading the EX-series platform NETPFE module
ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
starting local daemons:set cores for group access
.
Wed Jan 20 07:11:37 UTC 2016
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27271 free (23 frags, 3406 blocks, 0.0% fragmentation)Amnesiac (ttyu0)login: root--- JUNOS 12.3R12.4 built 2016-01-20 04:27:51 UTC
root@:RE:0% cli
root> show system alarms
No alarms currently activeroot> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis BH0209358009 EX3200-24T
Routing Engine 0 REV 15 750-021261 BH0209358009 EX3200-24T, 8 POE
FPC 0 REV 15 750-021261 BH0209358009 EX3200-24T, 8 POE
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 24x 10/100/1000 Base-T
Power Supply 0 REV 04 740-020957 AT0509085837 PS 320W AC
Fan Tray Fan Trayroot> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 Absent
Fans FPC 0 Fan 1 OK Spinning at normal speedroot> show version
Model: ex3200-24t
JUNOS Base OS boot [12.3R12.4]
JUNOS Base OS Software Suite [12.3R12.4]
JUNOS Kernel Software Suite [12.3R12.4]
JUNOS Crypto Software Suite [12.3R12.4]
JUNOS Online Documentation [12.3R12.4]
JUNOS Enterprise Software Suite [12.3R12.4]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R12.4]
JUNOS Routing Software Suite [12.3R12.4]
JUNOS Web Management [12.3R12.4]
JUNOS FIPS mode utilities [12.3R12.4]root>Switch A3U-Boot 1.1.6 (Mar 26 2011 - 04:42:33)Board: EX3200-24T 2.15
EPLD: Version 6.0 (0x85)
DRAM: Initializing (512 MB)
FLASH: 8 MBFirmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(hmerge svl-junos-pool130.juniper.net, Sat Mar 26 02:46:28 PDT 2011)
Memory: 512MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s1:
Loading /boot/defaults/loader.conf
/kernel data=0xa9cc74+0xb01c4 syms=[0x4+0x904b0+0x4+0xd3a0f]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R12.4 #0: 2016-01-20 04:27:51 UTC
builder re-use a leaf (all_slot_serialid)!
Timecounter \"decrementer\" frequency 37500000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.2
cpu0: HID0 memory = 510656512 (487 MB)
avail memory = 499212288 (476 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0: <PPC e500 Nexus device>
ocpbus0: <on-chip peripheral bus> on nexus0
openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: <mpc85xx memory ECC monitor> iomem irq 32,34 on ocpbus0
ECC not enabled to report errors 0xc3000000
device_attach: memctl0 attach returned 6
i2c0: <MPC85XX OnChip i2c Controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
poe0: <POE> on i2c0
i2c1: <MPC85XX OnChip i2c Controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
lbc0: <Freescale 8533 Local Bus Controller> iomem irq 22 on ocpbus0
cb fpga: un-supported RE/board:32
cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:32
syspld0 iomem 0xff000000-0xff00ffff on lbc0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 00:26:88:6f:f2:7f
miibus0: <MII bus> on tsec0
e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: <Freescale MPC8544 PCI host controller> iomem on ocpbus0
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 18.0 (no driver attached)
ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: <Philips ISP156x USB 2.0 controller> on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: <Freescale MPC8544 PCI Express host controller> iomem irq 42 on ocpbus0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpfe0: <Juniper EX-series Packet Forwarding Engine> mem irq 18 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
idma0: <mp85xxx DMA Controller> iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 36 ..
bmeb: bmeb_lib_init done 0x81fcc800, addr 0x80a9e128
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread \"wkupdaemon\" (pid 42) exited prematurely.
Trying to mount root from ufs:/dev/da0s1a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted fips-mode-powerpc package on /dev/md1...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-powerpc-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md3...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jkernel-ex package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jpfe-ex42x package on /dev/md5...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex42x-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md7...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R12.4 signed by PackageProduction_12_3_0
Executing reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27271 free (23 frags, 3406 blocks, 0.0% fragmentation)
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 59599 free (215 frags, 7423 blocks, 0.3% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
savecore: Reboot reason(s): 0x2: watchdog
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 172355 free (35 frags, 21540 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31566 free (30 frags, 3942 blocks, 0.1% fragmentation)
rm: /var/etc/pam.conf: Operation not permitted
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file=\'/sbin/kats/cannot-exec\' fsid=72 fileid=51404 gen=1 uid=0 pid=469
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo
kld netpfe drv:Loading the EX-series platform NETPFE module
ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
starting local daemons:set cores for group access
.
Wed Jan 20 07:10:57 UTC 2016
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27783 free (23 frags, 3470 blocks, 0.0% fragmentation)Amnesiac (ttyu0)login: root--- JUNOS 12.3R12.4 built 2016-01-20 04:27:51 UTCBroadcast Message from root
(no tty) at 7:11 UTC...ALERT:Auto-image upgrade will start. This can terminate config CLI sess
ion(s). Modified configuration will be lost. To stop Auto-image, in CLI do the
following: \'edit; delete chassis auto-image-upgrade; commit\'.
root@:RE:0% cli
root> show system alarms
No alarms currently activeroot> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis BH0209381760 EX3200-24T
Routing Engine 0 REV 15 750-021261 BH0209381760 EX3200-24T, 8 POE
FPC 0 REV 15 750-021261 BH0209381760 EX3200-24T, 8 POE
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 24x 10/100/1000 Base-T
Power Supply 0 REV 04 740-020957 AT0509230356 PS 320W AC
Fan Tray Fan Trayroot> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 Absent
Fans FPC 0 Fan 1 OK Spinning at normal speedroot> show version
Model: ex3200-24t
JUNOS Base OS boot [12.3R12.4]
JUNOS Base OS Software Suite [12.3R12.4]
JUNOS Kernel Software Suite [12.3R12.4]
JUNOS Crypto Software Suite [12.3R12.4]
JUNOS Online Documentation [12.3R12.4]
JUNOS Enterprise Software Suite [12.3R12.4]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R12.4]
JUNOS Routing Software Suite [12.3R12.4]
JUNOS Web Management [12.3R12.4]
JUNOS FIPS mode utilities [12.3R12.4]root>

---

---

---

Related Items:

i3 cpu lot of 8

$32.99

---

LOT OF 3 NVIDIA Quadro NVS 310 1GB DDR3 64Bit Video Graphics Card

$29.99

---

Lot of 15 4GB PC3-12800 Laptop Ram Mixed Brands SODIMM

$19.99

---

Documentation

• AIX Local Security Checks
• Backdoors
• CentOS Local Security Checks
• CGI abuses
• CISCO
• Databases
• Debian Local Security Checks
• Default Unix Accounts
• Denial of Service
• Fedora Local Security Checks
• Finger abuses
• Firewalls
• FreeBSD Local Security Checks