10Base-T to 10Base-FL Media Converter

No Power Supply or Documents Requires 12 VDC 800ma

Untested but 7 Day Satisfaction Guaranty

http://www.ktinet.com

The KC-10TF Series consists of three models of Ethernet Media Converters: KC-10TFT, KC-

10TFC, KC-10TFS12.

These converters are designed to convert 10Base-T to/from 10Base-FL media type. The KC-10TF

Series supports three fiber media types: multimode ST, SC and single mode ST connectors

respectively. All three models support convenient connection to either a straight-through or a

cross-over cable on the UTP end.

The KC-10 Series is a cost effective and easy solution for using in a mixed cabling environment or

extending the network span to include a fiber optic backbone.

Specifications:

Standard IEEE 802.3 Ethernet 10Base-T and 10Base-FL

Fiber Port MM*1 ST, MM SC, SM ST

Fiber Cable MM 850nm 62.5/125µm fiber cable (max. distance: 2km)

SM*2 1300nm 9/125µm fiber cable (max. distance: 12km)

TP Port Shielded RJ-45 jack

Cable Cat. 3, 4, 5 UTP cable (100m max.)

LEDs - Power status

- Link and receive status for TP port

- Link and receive status for fiber port

Environment Operating temperature: 0o to 40o C

Relative humidity: 10% to 90% non-condensing

Dimension 101 x 96 x 25mm (3.98 x 3.78 x 0.98inch)

Power +12VDC, 800mA min.

Key Features:

Complies with 802.3 10base-T and 10Base-FL standards

Provides media conversion from UTP to fiber optic media types

Extends network span from 2km (multimode fiber) up to 12km (single mode)

Provides a push button to set the crossover function for the TP port

Interoperable with other 10Base media converters, 10Base, 10/100Base-T NICs, hubs or switches

Provides LEDs for easy network monitoring

Supports a variety of fiber optic connectors, including duplex multimode ST, SC, and single mode ST