Juniper QFX3500-MB-RJ45-AFO Port-to-FRU Management Board For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

---

Juniper QFX3500-MB-RJ45-AFO Port-to-FRU Management Board:
$135.00

Juniper QFX3500-MB-RJ45-AFO

SN . Checked and tested by certified Cisco tech. All commands executed on actual unit.

Guaranteed non DOA for 90 days.

Booting.

Trying Config: CMD:0x40
Available Memory on Channel0 [2048MB]
Skipping clock programming - DRAM channels 0 and 2 share a PLL.
Trying Config: CMD:0x40
Available Memory on Channel2 [2048MB]

Partition [0,1ÿ

Booting...

Trying Config: CMD:0x40
Available Memory on Channel0 [2048MB]
Skipping clock programming - DRAM channels 0 and 2 share a PLL.
Trying Config: CMD:0x40
Available Memory on Channel2 [2048MB]

Partition [1,1]
DRAM MATS Passed

U-Boot 1.1.6 (Build time: Jan 25 2012 - 07:52:02)

CPU Frequency = 1200000000Hz
DRAM: 183 MB
Flash: 8 MB
PCIE: [4RCx1] Mode Detected
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Net: gmac0, gmac1, gmac2, gmac3, gmac4, gmac5, gmac6, gmac7
ELF file is 32 bit
Loading .text @ 0x8f000078 (243004 bytes)
Loading .rodata @ 0x8f03b5b4 (13912 bytes)
Loading .rodata.str1.4 @ 0x8f03ec0c (15880 bytes)
Loading set_Xcommand_set @ 0x8f042a14 (96 bytes)
Loading .rodata.cst4 @ 0x8f042a74 (16 bytes)
Loading .data @ 0x8f043000 (5572 bytes)
Loading .data.rel.ro @ 0x8f0445c4 (120 bytes)
Loading .data.rel @ 0x8f04463c (136 bytes)
Clearing .bss @ 0x8f0446c8 (8304 bytes)
## Starting application at 0x8f000078 ...
Resetting state for secondary cpus 0xffe....DONE
Consoles: U-Boot console

FreeBSD/MIPS U-Boot bootstrap loader, Revision 0.1
(builder at kessuth.juniper.net, Wed Jan 25 06:08:01 UTC 2012)
Memory: 183MB
Loading /boot/defaults/loader.conf
/kernel data=0xb0d538+0x119f144 [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x801000c0 ...
Sanity Check pass on prom_info @ 0x81d22f68
init regular console
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb kdm
KDB: current backend: ddb
Running in PARTITIONED TLB MODE
Copyright (c) 1996-2015, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 14.1X53-D17.1 #0: 2015-07-26 23:34:29 UTC
builder at debug.mpsafenet forced to 0 as ipsec requires Giant
can\'t re-use a leaf (fxseries_simulation)!
JUNOS 14.1X53-D17.1 #0: 2015-07-26 23:34:29 UTC
builder at memory = 14566330044776458 (10305343585129594880K bytes)
avail memory = 2748239872 (2620MB)
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
netisr_init: !debug_mpsafenet, forcing maxthreads from 12 to 1
ETHERNET SOCKET BRIDGE initialising
Reboot reason(s): 0x400:bios auto recovery reset
fpga driver loaded, 0 (null)
FXPCI warning: hw.pci.enable_static_config is not set.
Creating PCI Scan thread
: RMI\'s XLR CPU Rev. 0.3 with no FPU implemented
L1 Cache: I size 32kb(32 line), D size 32kb(32 line), eight way.
L2 Cache: Size 1024kb, eight way
16550A, console
usb0: EHCI version 1.0
usb0: USB revision 2.0
uhub0: 2 ports with 2 removable, self powered
Timecounter \"mips\" frequency 1200000000 Hz quality 0
Timecounter \"xlr_pic_timer\" frequency 66666666 Hz quality 1
Loading Redundant LT driver
Loading the NETPFE fc module
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
dedranel0 tahtr eaumassd \"w-skuipdaemmon\"0 b(ups id 0 targe7t 70) leuxni t0e
G dpar0e:m a<tAuTrPe lAyF.8
SSGH-JP4 1100> Fixed Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 7678MB (15724544 512 byte sectors: 255H 63S/T 978C)
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...

Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jboot signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jbase-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted jkernel package on /dev/md2...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jkernel-qfx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted jpfe package on /dev/md4...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jpfe-qfx-35xx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted jdocs package on /dev/md6...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jdocs-qfx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted jroute package on /dev/md8...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jroute-qfx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Executing jcrypto package on /dev/md10...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jcrypto-qfx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted jswitch package on /dev/md12...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified jswitch-qfx-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Mounted py-base-xlr package on /dev/md14...
Verified manifest signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
Verified py-base-xlr-14.1X53-D17.1 signed by PackageDevelopmentEc_2015
veriexec: accepting signer: PackageDevelopmentEc_2015
swapon: adding /dev/da0s3b as swap device
sysctl: unknown oid \'dev.ad.1\'
Checking sanity of /var/tmp [ /dev/da0s3d ] ... done (full)
Disabling soft update on /var/tmp [ /dev/da0s3d ] ... done
Checking sanity of /var [ /dev/da0s1f ] ... done (full)
Disabling soft update on /var [ /dev/da0s1f ] ... done
Checking sanity of /config [ /dev/da0s3e ] ... done (full)
Disabling soft update on /config [ /dev/da0s3e ] ... done
Checking sanity of /var/shared [ /dev/da0s3f ] ... done (full)
Disabling soft update on /var/shared [ /dev/da0s3f ] ... done
Checking sanity of /var/rundb [ /dev/da0s3g ] ... done (full)
Disabling soft update on /var/rundb [ /dev/da0s3g ] ... done
Checking sanity of / [ /dev/da0s1a ] ... done (full)
Disabling soft update on / [ /dev/da0s1a ] ... dSone
ystem booted successfully to single user
Automatic reboot in progress...
df: /var/rundb: No such file or directory
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 128890 free (26 frags, 16108 blocks, 0.0% fragmentation)
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 103661 free (157 frags, 12938 blocks, 0.1% fragmentation)
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 514895 free (39 frags, 64357 blocks, 0.0% fragmentation)
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 1248979 free (35 frags, 156118 blocks, 0.0% fragmentation)
ln: /mfs/var/sdb/sdb: File exists
Creating initial configuration...mgd: error: Cannot open configuration file: /config/juniper.conf
mgd: warning: activating factory configuration

mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: kdm.
Doing initial network setup:.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> netpfe drv: ifpfed_eth ifpfed_lt ifpfed_ml_cmn ifpfed_ppeer ifpfed_svcs ifpfed_vtkld platform: dc_ifpfeLoading the DC Platform NETPFE module
kld peertype: peertype_fxpc peertype_hcm peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.

Loading Online Diag module...
machdep.bootsuccess: 0 -> 1
package_name2: not found
hw.dcf.auto_upgrade_enabled: 0 -> 1
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization: kdm.
kern.securelevel: -1 -> 1
starting local daemons:set cores for group access
.
Fri Aug 24 10:20:33 UTC 2018

amnesiac (ttyd0)

login: root

<rroot@:LC:0% cli
warning: This chassis is operating in a non-master role as part of a virtual-chassis (VC) system.
warning: Use of interactive commands should be limited to debugging and VC Port operations.
warning: Full CLI access is provided by the Virtual Chassis Master (VC-M) chassis.
warning: The VC-M can be identified through the show virtual-chassis status command executed at this console.
warning: Please logout and log into the VC-M to use CLI.
{linecard:0}
root>request system halt

warning: This command will halt all the members.
If planning to halt only one member use the member option
Halt the system ? [yes,no] (no) yes

*** System shutdown message from roota@ ***

System going down in 1 minute

Shutdown at Fri May 4 23:38:41 2018.
[pid 1238]
message System shutdown message from root@ ***

System going down in 30 seconds

*** FINAL System shutdown message from root@ ***

System going down IMMEDIATELY

MWaiting (max 60 seconds) for system process `vnlru\' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem\' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon\' to stop...done
Waiting (max 60 seconds) for system process `syncer\' to stop...
Syncing disks, vnodes remaining...5 1 0 1 1 0 0 0 0 done

syncing disks... All buffers synced.
Uptime: 7m59s
recorded reboot as normal shutdown

The operating system has halted.
Please press any key to reboot.

---

---

---

Related Items:
Warning: Invalid argument supplied for foreach() in /home/vscan/public_html/store/relateditems.php on line 72

Documentation

• AIX Local Security Checks
• Backdoors
• CentOS Local Security Checks
• CGI abuses
• CISCO
• Databases
• Debian Local Security Checks
• Default Unix Accounts
• Denial of Service
• Fedora Local Security Checks
• Finger abuses
• Firewalls
• FreeBSD Local Security Checks