Juniper EX4200-24T 24-Port Gigabit 8-PoE Switch w/ 1x 320W AC PS READ DESCRIP For Sale

Juniper EX4200-24T 24-Port Gigabit 8-PoE Switch w/ 1x 320W AC PS READ DESCRIP
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Juniper EX4200-24T 24-Port Gigabit 8-PoE Switch w/ 1x 320W AC PS READ DESCRIP:
$245.00

  • Home
  • About Us
  • Payment
  • Shipping
  • Returns
  • response
  • Contact Us
  • Welcome to GreenTekSolutions-B
  • Add to Favorites
  • Need Help! [phone removed by ]
Store Categories Juniper EX4200-24T 24-Port Gigabit 8-PoE Switch w/ 1x 320W AC PS READ DESCRIP
Description Do you have excess I.T equipment? Sell it to us!
The BEST in Buyback Programs!

GreenTek Solutions LLC
Call us today for more information.
[phone removed by ]
Our Hassle-free buyback program offers:

  • Free evaluation of your I.T equipment!
  • Purchase of I.T equipment in its current condition!
  • Shipping or pick-up is on us!
  • Free recycling of out of date equipment!
Item Description

Switch is used but in good working condition unit was pulled from a fully working environment. Unit was reset to factory default and fully tested. Please note unit will show signs of scratches and wear on the casing but nothing that will affect performance. Refer to pictures for conditions. Thank you.

We offer a 30 day satisfaction guaranteed warranty on all the items listed in our store. If for some reason you\'re not happy with your purchase, please don\'t hesitate to contact us and we will try our best to fix it.


***ALSO PLEASE BE AWARE THAT THE POWER SUPPLY HANDLE IS SLIGHTLY BENT

AND ALSO NO SLOT COVER ON THE PS SLOT & MODULE SLOT.***

Included Items

1x Juniper EX4200-24T 24-Port Switch w/ 1x Power Supply

1x Console Cable

1x Power Cord

1x Rack-Ears



moog



Tech Specs


Boot Output


U-Boot 1.1.6 (Mar 28 2011 - 04:05:40)

Board: EX4200-24T 4.18
EPLD: Version 10.0 (0x80)
DRAM: Initializing (1024 MB)
FLASH: 8 MB

Firmware Version: --- 01.00.00 ---
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

ELF file is 32 bit
Consoles: U-Boot console

FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4
(builderdagmath.juniper.net, Mon Mar 28 01:49:54 UTC 2011)
Memory: 1024MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0xa8f66c+0xb070c syms=[0x4+0x8fb90+0x4+0xd2b43]


Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x800000c0 ...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R4.6 #0: 2013-09-13 02:39:14 UTC
can\'t re-use a leaf (all_slot_serialid)!
Timecounter \"decrementer\" frequency 50000000 Hz quality 0
cpu0: Freescale e500v2 core revision 2.3
cpu0: HID0 80004080
real memory = 1047527424 (999 MB)
avail memory = 1025544192 (978 MB)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
nexus0:
ocpbus0: on nexus0
openpic0: iomem 0xfef40000-0xfef600b3 on ocpbus0
memctl0: iomem irq 32,34 on ocpbus0
i2c0: iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0
poe0: on i2c0
i2c1: iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0
uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0
lbc0: iomem irq 22 on ocpbus0
cb fpga: un-supported RE/board:37
cfi0: iomem 0xff800000-0xffffffff on lbc0
cb fpga: un-supported RE/board:37
syspld0 iomem 0xff000000-0xff00ffff on lbc0
tsec0: iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0
tsec0: hardware MAC address 40:b4:f0:7f:f1:ff
miibus0: on tsec0
e1000phy0: on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib0: iomem on ocpbus0
pci0: on pcib0
pci0: at device 18.0 (no driver attached)
ehci0: mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0
usb0: EHCI version 1.0
usb0: on ehci0
usb0: USB revision 2.0
uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2
pcib1: iomem irq 42 on ocpbus0
pci1: on pcib1
pcib2: at device 0.0 on pci1
pci2: on pcib2
mpfe0: mem irq 19 at device 0.0 on pci2
mpfe_adcr_shadow_alloc: allocated idx: 0
pcib3: iomem irq 43 on ocpbus0
pci3: on pcib3
pcib4: at device 0.0 on pci3
pci4: on pcib4
root@:RE:0% per EX-series Packet Forwarding Engine> mem irq 18 at device 0.0 on pci4
mpfe_adcr_shadow_alloc: allocated idx: 1
idma0: iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0
Initializing product: 41 ..
bmeb: bmeb_lib_init done 0x82b56800, addr 0x80a90b04
bme0:Virtual BME driver initializing
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
Kernel thread \"wkupdaemon\" (pid 42) exited prematurely.
da0 at umass-sim0 bus 0 target 0 lun 0
da0: Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R4.6 signed by PackageProduction_12_3_0
Mounted fips-mode-powerpc package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-powerpc-12.3R4.6 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R4.6 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R4.6 signed by PackageProduction_12_3_0
Mounted jkernel-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-12.3R4.6 signed by PackageProduction_12_3_0
Mounted jpfe-ex42x package on /dev/md10...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex42x-12.3R4.6 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md12...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R4.6 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md14...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R4.6 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md16...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R4.6 signed by PackageProduction_12_3_0
Executing Automatic reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 28144 free (24 frags, 3515 blocks, 0.0% fragmentation)
** /dev/da0s3e
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
INCORRECT BLOCK COUNT I=193 (128 should be 120)
CORRECT? yes

** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? yes

SUMMARY INFORMATION BAD
SALVAGE? yes

BLK(S) MISSING IN BIT MAPS
SALVAGE? yes

719 files, 1957 used, 60945 free (265 frags, 7585 blocks, 0.4% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

***** FILE SYSTEM WAS MODIFIED *****
Computing slice and partition sizes for /dev/da0 ...
savecore: Reboot reason(s): 0x1: power cycle/failure
No dump exists
** /dev/da0s3d
** Last Mounted on /var/tmp
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
27 files, 532 used, 188322 free (34 frags, 23536 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
** /dev/da0s4d
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
39 files, 43 used, 31563 free (35 frags, 3941 blocks, 0.1% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no fingerprint for file=\'/sbin/kats/cannot-exec\' fsid=74 fileid=51404 uid=0 pid=531
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-series platform NETPFE module
if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:set cores for group access
.
Sat Mar 17 20:16:01 UTC 2012
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 27632 free (16 frags, 3452 blocks, 0.0% fragmentation)

Amnesiac (ttyu0)

login: root
Password:

--- JUNOS 12.3R4.6 built 2013-09-13 02:39:14 UTC



Show Version Output

fpc0:
Model: ex4200-24t
JUNOS Base OS boot [12.3R4.6]
JUNOS Base OS Software Suite [12.3R4.6]
JUNOS Kernel Software Suite [12.3R4.6]
JUNOS Crypto Software Suite [12.3R4.6]
JUNOS Online Documentation [12.3R4.6]
JUNOS Enterprise Software Suite [12.3R4.6]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R4.6]
JUNOS Routing Software Suite [12.3R4.6]
JUNOS Web Management [12.3R4.6]
JUNOS FIPS mode utilities [12.3R4.6]


Show ENV ALL Output

Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 Absent
Fans FPC 0 Fan 1 OK Spinning at full speed
FPC 0 Fan 2 OK Spinning at full speed
FPC 0 Fan 3 OK Spinning at full speed


Show Inventory Output

Hardware inventory:
Item Version Part number Serial number Description
Chassis BM0212397654 EX4200-24T
Routing Engine 0 REV 18 750-033065 BM0212397654 EX4200-24T, 8 POE
FPC 0 REV 18 750-033065 BM0212397654 EX4200-24T, 8 POE
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 24x 10/100/1000 Base-T
Power Supply 0 REV 05 740-020957 AT0512351883 PS 320W AC
Fan Tray Fan Tray

  • Payment
  • Shipping
  • Returns
  • Terms
  • Guarantee
  • About Us
� Only PayPal and major credit cards are accepted. (Amex, Visa, MasterCard)
� Immediate Payment is required after the Winning offer
� Item will be shipped immediately on the same or next business day of receiving full payment � Shipping within the 48 Contiguous United States is Free
� International buyers are welcome.
� Alaska, Hawaii and Puerto Rican buyers have to contact me for a shipping quote prior offerding.
� P.O. Box Delivery is offered but is possible that there can be shipping charges.
� APO/FPO Delivery is offered but is possible that there can be shipping charges.
� PayPal Confirmed Addresses Only
� Items Will be Shipped by USPS or FedEx on the Same or Next Business day of receiving full payment
� UPS or FedEx Tracking Number will be provided \"AS-IS\" items have no warranty and do not qualify for refunds or exchanges. Refunds are only provided if a suitable replacement is not available. The buyer must notify GreenTek Solutions in writing (e-mails qualify) of any problem within the documented warranty period to qualify for refund or replacement. GreenTek Solutions is not obligated to offer warranty services beyond the stated warranty period. Return Authorization (RMA) is required for defective product returns. Credit for returned item will be issued after the return of the defective product.

Upon receipt of Return Authorization, the buyer has 3 Business Days to ship item to us and provide tracking number via e-mail. GreenTek Solutions does not issue refunds for any form of shipping, either to or from the buyer. Items that are damaged while in the buyer\'s possession, regardless of circumstances, do not qualify for a refund or exchange. In addition, items damaged by improper packaging when returned to GreenTek Solutions will not qualify for refund or exchange.

Items with Warranty: We affix \"warranty labels\" on all items that have a warranty. Evedince of tampering, removal or broken seal, will VOID the warranty. Texas buyers and local picked up customers at our office - GreenTek Solutions - will be charged 8.25% Sales Tax. Buyers are required to provide payment within 1 week from sale close, unless other arrangements are made. Late payments may result in order cancellation.

International sales over $1000 will only ship after payment has cleared. International sales over $1000 will only ship after payment has cleared.

PLEASE do not ask us to reduce the amount of the invoice for customs purposes, because we will not do it. We will only declare items purchased as a commercial sample, nothing else (gift, return, etc.). All of our items work for servers, Not for desktop. Buyer may return defective Goods for replacement or refund (as elected by Seller) within 30 days of purchase. Subject to Seller\'s reasonable approval, Buyer may return for credit within 30 days of purchase non-defective Goods the sales price of which, together with the sales price of any other non-defective items previously returned to Seller by Buyer, do not exceed 2% of the aggregate sales prices of all non-defective products purchased by Buyer from Seller. Non-defective, special order products are normally not accepted for return; other returns are handled on a case-by-case basis in Seller\'s sole discretion. All returns must be accompanied by an authorized RMA number, which is valid for 15 days after the date of issuance, and returns of non-defective normally stocked items in resalable condition will be accepted for credit subject to a restocking charge of no less than 15% of the sales price. A Return Material Authorization (RMA) number must be obtained for all returns. Please contact GreenTek Solutions RMA for assistance. GreenTek Solutions entirely eliminates the risk associated with electronic recycling by managing the entire process from pick-up to final destination. We recover, re-market and recycle technology from companies from all sizes, large public retail, government entities and education institutions. Useful Links:
  • HOME
  • ABOUT US
  • PAYMENT
  • Shipping
  • RETURN
  • response
  • CONTACT US
Thanks for visiting
ABOUT US Sell us your IT Equipment! If you have any excess inventory, GreenTek Solutions is able to pay cash or arrange a consignment agreement for your items. Contact us directly for details regarding any inventory of value. If you have a list for excess inventory please add us to your distribution list and someone will reply in a timely manner.

Read More PAYMENT OPTIONS Sign Up for our Newsletter Get all the Latest News, Updates and Offers..
© Copyright , GreenTekSolutions-B All rights reserved. store Designed & Developed By


Buy Now

Related Items:

EX4200-24T JUNIPER REV22 320W 24 PORT ETHERNET SWITCH 750-021256 1U COM5T00BRA picture

EX4200-24T JUNIPER REV22 320W 24 PORT ETHERNET SWITCH 750-021256 1U COM5T00BRA

$75.00



Documentation

  • AIX Local Security Checks
  • Backdoors
  • CentOS Local Security Checks
  • CGI abuses
  • CISCO
  • Databases
  • Debian Local Security Checks
  • Default Unix Accounts
  • Denial of Service
  • Fedora Local Security Checks
  • Finger abuses
  • Firewalls
  • FreeBSD Local Security Checks