This item has been shown 586 times.
FOR SALE - USED ELECTRODATA T1 WATCHER. SPECS FROM ELECTRODATA WEBSITE -
The T1-WATCHER® gives you the capabilities you need to identify and isolate T1 problems.
Designed with ease of use in mind, it does not require days of training, thick manuals, or cryptic help lists. In seconds you can make your first measurement, and in minutes you will have mastered all of the measurements you require.
Yet, for all its simplicity, you get a full-featured monitoring instrument that can be used for installation, maintenance or as a performance monitor. It can verify span operation and isolate problems to span components or end-user equipment. The T1-WATCHER will measure Level and Frequency of the T1 signal and auto configure to the line code and framing. It automatically recognizes eight test patterns, including QRSS, 3 in 24 and 55 OCTET. It will also count errors and display statistics, such as Error Free Seconds, to verify operation of the T1 span over long time periods. The alarm and status indicators will even flash to attract attention to a condition that has changed during a test.
Channel access and signaling bits.
The T1-WATCHER can select any one of the 24 DSO channels in the data stream for monitoring. It can even scan to find an active channel. Once a channel is selected, the data bits along with the signaling bits are displayed, and you can listen to the channel using the internal speaker or external earphone. If a voice channel is under test, the signal level and frequency of the test signal can be displayed. To aid in troubleshooting or to judge the level of activity on the T1 circuit, the T1-WATCHER can display all 24 A, B, C, or D signaling bits at one time.
Specifications for the T1-WATCHER®
RECEIVER
Clock Recovered from received data
Line AMI or B8ZS, selected automatically
None, SF,ESF and SLC*-96
Test QRSS, 1:7, 2 in 8, 3 in 24, 1:1, all 1's,
T1 DALY and 55 OCTET
Channel FULL T1 or 64 x 1
Input
Bantam Jack
Level Range
Terminate & Bridge: DSX -6 dB to DSX -36 dB
DSX -14 dB to DSX -40 dB
Impedance
100 ohms
100 ohms
Greater than 1000 ohms
Auto Configuration: Line coding, frame format, and pattern
POWER
Rechargeable
Battery 5 hours minimum per charge
Recharge 6 hours nominal
AC 115 vac, 60 Hz
PHYSICAL
2 line by 16 character
5.5"L x 3.75"W x 2.5"H
1.25 lbs (.6Kgram)
Operating Temperature: -20°C to 60°C
Storage Temperature: -30°C to 80°C
10% to 90% noncondensing
MEASUREMENTS
BPV
BIT
Frame
CRC
Errored seconds
and Errored seconds
Percent errored seconds
Error free seconds
Percent error free seconds
Elapsed test time
T1 and Receive frequency and level
DSO channel number and data
DSO channel signaling
DSO channel frequency and level
A, B, C and D signaling, all 24 channels
Specifications subject to change without notice.
SELLERS POLICIES – VERY IMPORTANT READ BEFORE YOU BID!!!
I am not an ebay business, I simply do this to get rid of stuff lying around my home and to have some fun. But I have learned a few lessons on Ebay and many of them are below.
SHIPPING
I am happy to combine shipping for items purchased at the same time, simply email me after the auction and I will provide total cost.
Buyer will pay actual shipping charges. I don’t rip people off for shipping, I find others that do to be an insult. I do estimate the cost based upon weight, size and experience, even then I don’t overcharge. I primarily ship USPS Priority Mail to any U.S. Destination (larger and more expensive items ship UPS)
Outside of U.S.
I am happy to ship to Canada, all others must email before bidding!!! Payment will be through PAYPAL ONLY, no other form of payment. If you are an international buyer please email me before purchasing, you will be responsible for all shipping charges regardless.
Shipping timeframe
Items are shipped within 1 to 4 business days of payment receipt.
PAYMENT
IF YOU CAN’T PAY VIA PAYPAL OR MONEY ORDER PLEASE DON’T BID, NO PERSONAL CHECKS. YOU WILL HAVE 7 DAYS TO PAY INCLUDING MONEY ORDERS, IF YOU DO NOT PAY IN 7 DAYS I WILL FILE A NON-PAYING BIDDER WITH EBAY AND POST NEGATIVE FEEDBACK.
WARRANTIES/PURCHASE REQUIREMENTS
I do my best to provide a detailed description but if you have questions, email me before you bid. Once you bid you are obligated to purchase, should you win. You are buying as is, no promises, no warranties, what you see is what I will ship. If an item is not as described I will make it right, I like to receive good customer service and so I give good service!
THANKS FOR LOOKING AND CHECK OUT MY OTHER AUCTIONS FOR ADDITIONAL COOL STUFF!
Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
