PA-MC-T3 Multi-Channel T3 Synchronous Serial Port Adapterfor Cisco 7200, 7300 and 7500 Series Routers
You are bidding on a used Cisco PA-MC-T3 port adapter in good working condition.The PA-MC-T3 is a single-width single-port, port adapter that provides one T3 interface connection using BNC connectors. The interface can provide up to 28 T1 lines (a single T3 group). Each T1 line is presented to the system as a serial interface that can be configured individually.

The PA-MC-T3 contains the following features:

• Transmits and receives data bidirectionally at the T3 rate of 44.736 Mbps (digital signal carried on a T3 line, digital signal level 3 [DS3]).
• The T3 connection, provided by way of two female BNC connections for transmit (TX) and receive (RX), requires RG-59 coaxial cable that has an impedance of 75 ohms.
• Supports RFC 1406 and RFC 1407 (CISCO-RFC-1407-CAPABILITY.my). For RFC 1406, Cisco supports all tables except the Frac table. For RFC 1407, Cisco supports all tables except the FarEnd tables. (For information on accessing Cisco MIB files, refer to the Cisco Management Information Base (MIB) User Quick Reference
• PA-MC-T3 microcode is loaded into and operates from DRAM (or SDRAM) configuration and is determined by the VIP model on which the PA-MC-T3 is installed.
• On the Catalyst RSM/VIP2, PA-MC-T3 microcode is loaded into and operates from DRAM on the Catalyst RSM/VIP2-40.

For more info about the port adapter and supported router platforms, please refer bid includes:

• 1x PA-MC-T3 (as shown in the picture)
  

TERMS OF SALE
By bidding on this item the buyer understands and agrees with all the statements noted below.
All payments must be made within 3 days of the auction close.

SHIPPING &INSURANCE
Flat rate shipping to lower 48 states only.

GENERAL REFUND POLICY
All sales are final, and only be eligible for return if DOA.