This item has been shown 92 times.
CISCO2610XM Router w/ CallManager Express 4.0(0)
For sale is a Cisco2610XM VoIP Router with 128MB DRAM and 48MB FLASH. The router is loaded with IOS 12.4and Cisco CallManager Express 4.0 that will support up to
36 IP Phones.It is also loaded with the CME GUI, MoH and Phone files (Cisco IP phone ATA, 7902, 7905, 7906 - 7911, 7910, 7912, 7914,7920, 7935, 7936, 7940 - 7960, 7941 - 7961, and 7970 - 7971).
It may be configured using the command line or Web Interface. This is definitely a cost effective way of implementing VoIP and IP Telephony as suppose to themore expensive 2800/3700/3800 models.
Picture shown is a stock photo only. Therouter chassis may have minor scratches and marks, but will not hinder performance. Below is the console output for the 2610XM:
Router#show ver
Cisco IOS Software, C2600 Software (C2600-SPSERVICESK9-M), Version 12.4(9)T7, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 10-Jan-08 16:00 by prod_rel_team
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Router uptime is 37 minutes
System returned to ROM by power-on
System image file is
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2610XM (MPC860P) processor (revision 3.0) with 126090K/4982K bytes of memory.
Processor board ID JAE08127GSG
M860 processor: part number 5, mask 2
1 FastEthernet interface
32K bytes of NVRAM.
49152K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Router#show telephony-service
CONFIG (Version=4.0(0))
=====================
Version 4.0(0)
Cisco Unified CallManager Express
For on-line documentation please see:
ip source-address 192.168.1.100 port 2000
load 7910 P00405000700
load ata ATA030100SCCP040211A
load 7905 CP7905080001SCCP051117A
load 7902 CP7902080001SCCP051117A
load 7920 cmterm_7920.4.0-02-00
load 7936 cmterm_7936.3-3-5-0
load 7970 SCCP70.8-0-4SR2S
load 7961 SCCP41.8-0-4SR2S
load 7941 SCCP41.8-0-4SR2S
load 7911 SCCP11.7-2-1-0S
load 7906 SCCP11.7-2-1-0S
load 7912 CP7912080001SCCP051117A
load 7914 S00104000100
load 7935 P00503010100
load 7960-7940 P0030702T023
max-ephones 24
max-dn 0
max-conferences 4 gain -6
dspfarm units 0
dspfarm transcode sessions 0
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 5
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line mode is single
time-format 12
date-format mm-dd-yy
timezone 0 Greenwich Standard Time
no call-forward pattern is configured.
no transfer-pattern is configured, transfer is restricted to local SCCP phones only.
keepalive 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout ringin-callerid 8
caller-id name-only: enable
web admin system name admin password cisco
web admin customer name Customer
edit DN through Web: disabled.
edit TIME through web: disabled.
Log (table parameters):
max-size: 150
retain-timer: 15
transfer-system full-consult
local directory service: enabled.
Multiple quantity orders are welcomed.
Warranty:
We offer 30 Day warranty. Guarantee against DOA. We will not be responsible for ESD damage, please take proper precautions during installation.Acceptable Payments:
Paypal, Checks, and Money Order.
Shipping/Handling:
U.S Domestic Shipping is 29.00. International buyers please send email for quote.
Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
