CISCO WS-C2960S-48LPS-L
NO RESERVEINCLUDING:
- ORIGINAL BOX;- ORIGINAL PACKING;- ORIGINAL ACCESSORIES;- POWER CORD;- RACK EARS;- CONSOLE CABLE
S/N: FOC1528Y1UR
7 DAY NON DOA WTY
AVAILABLE TO LOWER 48 STATES ONLY
SELLER ACCEPT PAYPAL ONLY
WINNERMUST MAKE PAYMENT WITHIN 24 HRS OF WINNING THE BID
FREE UPS SHIPPING
Using driver version 1 for media type 1
Base ethernet MAC Address: 64:d9:89:2b:2b:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
mifs[2]: 0 files, 1 directories
mifs[2]: Total bytes : 1806336
mifs[2]: Bytes used : 1024
mifs[2]: Bytes available : 1805312
mifs[2]: mifs fsck took 1 seconds.
mifs[3]: 0 files, 1 directories
mifs[3]: Total bytes : 3870720
mifs[3]: Bytes used : 1024
mifs[3]: Bytes available : 3869696
mifs[3]: mifs fsck took 0 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes : 258048
mifs[4]: Bytes used : 9216
mifs[4]: Bytes available : 248832
mifs[4]: mifs fsck took 1 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 9216
mifs[5]: Bytes available : 248832
mifs[5]: mifs fsck took 0 seconds.
mifs[6]: 560 files, 19 directories
mifs[6]: Total bytes : 57931776
mifs[6]: Bytes used : 15189504
mifs[6]: Bytes available : 42742272
mifs[6]: mifs fsck took 14 seconds.
...done Initializing Flash.
done.
Loading uncompressed and installed, entry point: 0x3000
executing... Restricted Rights LegendUse, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec.252.227-7013. cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), SOFTWARE (fc1)
Technical (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 05-May-11 16:56 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01B00000Initializing flashfs...
Using driver version 1 for media type 1
mifs[3]: 0 files, 1 directories
mifs[3]: Total bytes : 1806336
mifs[3]: Bytes used : 1024
mifs[3]: Bytes available : 1805312
mifs[3]: mifs fsck took 0 seconds.
mifs[3]: Initialization complete.mifs[4]: 0 files, 1 directories
mifs[4]: Total bytes : 3870720
mifs[4]: Bytes used : 1024
mifs[4]: Bytes available : 3869696
mifs[4]: mifs fsck took 1 seconds.
mifs[4]: Initialization complete.mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 9216
mifs[5]: Bytes available : 248832
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 258048
mifs[6]: Bytes used : 9216
mifs[6]: Bytes available : 248832
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.mifs[7]: 560 files, 19 directories
mifs[7]: Total bytes : 57931776
mifs[7]: Bytes used : 15189504
mifs[7]: Bytes available : 42742272
mifs[7]: mifs fsck took 1 seconds.
mifs[7]: Initialization complete....done Initializing flashfs.POST: MA BIST : Begin
FC 1 MBIST Test Passed.
DP Sg1 MBIST Test Passed.
DP Xg1 MBIST Test Passed.
NI 1 MBIST Test Passed.
FC 0 MBIST Test Passed.
DP Sg0 MBIST Test Passed.
DP Xg0 MBIST Test Passed.
NI 0 MBIST Test Passed.
UPB MBIST Test Passed.
POST: MA BIST : End, Status PassedPOST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passedextracting front_end/front_end_ucode_info (43 bytes)
Waiting for Stack Master Election...
POST: Inline Power Controller Tests : Begin
POST: Inline Power Controller Tests : End, Status PassedPOST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : EndPOST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status PassedPOST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status PassedPOST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status PassedElection Complete
Switch 1 booting as Master
Waiting for Port download...CompleteThis product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are
unable
to comply with U.S. and local laws, return this product immediately.A summary of U.S. laws governing Cisco cryptographic products may be
found WS-C2960S-48LPS-L (PowerPC) processor (revision C0) with 131072K
bytes of
memory.
Processor board ID FOC1528Y1UR
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
52 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address :
Motherboard assembly number : 73-11907-06
Power supply part number : 341-0393-02
Motherboard serial number : FOC152708NK
Power supply serial number : DCA1520U7K2
Model revision number : C0
Motherboard revision number : A0
Model number : WS-C2960S-48LPS-L
Daughterboard assembly number : 73-11933-04
Daughterboard serial number : FOC1527400X
System serial number : FOC1528Y1UR
Top Assembly Part Number :800-30937-02
Top Assembly Revision N
Version ID : V02
CLEI Code Number : COMGZ00ARB
Daughterboard revision number : A0
Hardware Board Revision Number : 0x01Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 52 WS-C2960S-48LPS-L RETURN to get started!*Mar 1 00:00:11.749: Read env variable - LICENSE_BOOT_LEVEL =
*Mar 1 00:00:12.409: = c2960s_lanbase Next reboot level = lanbase and License = lanbase
*Mar 1 00:02:02.332: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been
ADDED to the s
tack
*Mar 1 00:02:03.669: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Vlan1, cha
nged state to down
*Mar 1 00:02:04.686: %SPANTREE-5-EXTENDED_SYSID: Extended SysId
enabled for typ
e vlan
*Mar 1 00:02:56.574: %STACKMGR-5-SWITCH_READY: Switch 1 is READY
*Mar 1 00:02:56.574: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1
Switch 1 has c
hanged to state DOWN
*Mar 1 00:02:56.574: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2
Switch 1 has c
hanged to state DOWN
*Mar 1 00:02:57.120: %STACKMGR-5-MASTER_READY: Master Switch 1 is
READY
*Mar 1 00:02:57.198: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), SOFTWARE (fc1)
Technical (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 05-May-11 16:56 by prod_rel_team
*Mar 1 00:02:58.782: %LINK-3-UPDOWN: Interface FastEthernet0, changed
state to
down
*Mar 1 00:02:59.012: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is
RJ45.
*Mar 1 00:02:59.783: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthern
et0, changed state to down --- System Configuration Dialog ---Enable secret order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enab
le secret
If you choose not to enter the intial configuration dialog, or if you exit setup
without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0 <cleartext you like to enter the initial configuration dialog? [yes/no]: yesAt any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.Basic management setup configures only enough connectivity
for management of the system, extended setup will ask you
to configure each interface on the systemWould you like to enter basic management setup? [yes/no]: yes
Configuring global parameters:Enter host name [Switch]: