Amiga 500 - TF530 Accelerator 40mhz with 2MB Fast RAM + IDE & 4 GB CF card for Sale

Amiga 500 - TF530 Accelerator 40mhz with 2MB Fast RAM + IDE & 4 GB CF card For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Amiga 500 - TF530 Accelerator 40mhz with 2MB Fast RAM + IDE & 4 GB CF card:
$130.00

TF530 Accelerator with 33mhz MC68030RP Overclocked to 40 mhz with 2MB Fast RAM- IDE Controller and 4 gigabyte CF-Card.This is a open source Accelerator and may not be %100 compatible with all setups. More information about this Accelerator can befound here. https://github.com/terriblefire/tf530 I have also tested this board with the amiga 1000 with kickstart mod installed and it works fine.you will need to solder the INT2 pin for the IDE controller, you can see this installed on my Rev6 A500 in the picture. but my be at a different locationdepending on your board revision. you will need kickstart Rev 2.6 or higher for the IDE to boot the system. I don\'t think the upper motherboard shield will fit with
this card installed. not required, but if you live in a hot environment I would recommend a heat sink for the cpu. Some Rev 6 boards might require RP106 and RP107 network resistors to be installed.included is the TF530 Accelerator, Relocator board, cables, CF-Adapter, CF-Card. Easy to install but not \" plug and play \"

Recent Threads

Amiga 500 - TF530 Accelerator 40mhz with 2MB Fast RAM + IDE & 4 GB CF card For Sale

Amiga 500 - TF530 Accelerator 40mhz with 2MB Fast RAM + IDE & 4 GB CF card: $130.00

Amiga 500 - TF530 Accelerator 40mhz with 2MB Fast RAM + IDE & 4 GB CF card:
$130.00