This item has been slightly used, but has been tested and is in excellent working condition.
AP9217 Features 19 inch Rack-Mountable Supplies redundant AC power to connected equipment. Two AC lines power the unit and if the primary AC power fails, the unit will automatically switch to the alternate power source. Flash Upgradeable Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only) Boot-P support Helps ensure integrity for LDAP, Radius, SSL and SSH sessions. Remote Management Capabilities Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. (Note: Only applicable for units categorized as Networked). Power Sequencing Multiple User Support Defineable Outlet Control
Switched Rack PDU Features & Benefits Availability Local Current Monitoring Display The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only) Alarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability) Network Management Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Remote Individual Outlet Control Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment). Power Delays Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. InfraStruXure Manager compatible Enables centralized management via the APC InfraStruXure® Manager. Load indicator LED Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. Agility Rack-Mountable Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment. Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Wide range of input and output connections Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.
Here are the specs: Output Nominal Output Voltage 100V Maximum Total Current Draw per Phase 16A Output Connections (8) NEMA 5-15R Overload Protection Yes Input Nominal Input Voltage 100V Input Frequency 50/60 Hz Input Connections NEMA L5-20P Cord Length 3.66meters Number of Power Cords 1 Acceptable Input Voltage 90-132VAC Maximum Line Current per phase 16A Maximum Input Current per phase 16A Load Capacity 1920VA Overload Capacity (at nominal rated input V) 20A Physical Net Weight 3.18KG Maximum Height 44.00mm Maximum Width 432.00mm Maximum depth 165.00mm Shipping Weight 4.55KG Shipping Height 70.00mm Shipping Width 470.00mm Shipping Depth 343.00mm Color Beige Units per Pallet 100.00 Environmental Operating Environment 0 - 45°C Operating Relative Humidity 0 - 95% Operating Elevation 0-3000meters Storage Temperature -15 - 65°C Storage Relative Humidity 0 - 95% Storage Elevation 0-15000meters AP9606 Web/SNMP Management SmartSlot Card
AP9606 Features Event logging Pinpoint the timing and sequence of events leading up to an incident with the event log. Telnet Management Provides a simple telnet session or SSH for remote management access. MD5 Authentication Security Enhanced security for remote access via world wide web. Built-in Web/SNMP management Full-featured management via a Web browser as well as comprehensive management from a Network Management System. Web Management Manage Linux, Unix, Sun and Windows 2003 servers and other devices. Password Security User-selectable password protection prevents unauthorized access. Flash Upgradeable Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only) Boot-P support Helps ensure integrity for LDAP, Radius, SSL and SSH sessions. SNMP management Monitor and manage UPS availability on the network using industry standard protocols.
UPS Network Management Cards Features & Benefits Agility Scheduling Customize shut down and reboot of connected equipment and UPSs. Run command file Run command file on shutdown sequence as well as start-up sequence. Data logging Identify problematic trends before they escalate or export the data log for analysis. Event logging Pinpoint the timing and sequence of events leading up to an incident with the event log. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. Telnet Management Provides a simple telnet session or SSH for remote management access. Total Cost of Ownership Remote device management Remote monitoring of critical conditions for maximum protection against environmental and physical threats. Mass Configuration Wizard Reduce set up and configuration time by distributing files to networked UPS Network Management Cards. Browser accessible View the user interface with a browser. Provides quick access from anywhere on a secure network. Enterprise management system compatible Manage your APC devices from a single system by forwarding SNMP traps (events) to your preferred enterprise management system. Availability Reboot equipment remotely Saves dispatching technicians to remote locations. Operating system shutdown Prevents possible data corruption by performing graceful, unattended operating system shutdown in the event of an extended power outage. Fault notification Be notified of problems to ensure crucial situations are dealt with in a timely manner. Protection Password Security User-selectable password protection prevents unauthorized access. Read-only access Share access without risking unauthorized configuration changes. Radius support Use an existing radius server to securely authenticate, authorize, and account for your APC device. Compatibility Compatible with Smart-Slot enabled UPSs Compatible with all APC SmartSlot UPSs, including Smart UPS, Symmetra and Silcon units