This is a Tiara Networks 6200.

This has 16- T1 Ports Available.

Dram 64 MB and8 MB Flash.

Comes with power cord.

30 day warranty.

Let me know if you have any questions.

Please look at my other Tasman / Tiara Auctions.

Here is the boot up :

Press any key to stop

boot : fl
unit : 0
processor number : 0
host : Host
file : /flash1/NCM.Z
inet on ethernet (e) : 64.91.88.126:fffffffc
host inet : 10.1.3.1
user : wind
ftp password (pw) : ****
flags : 0xa
target name (tn) : ti.pell
other : lnPci

Attaching /flash1 device... Loading /flash1/NCM.Z...8600081
Starting at 0x80010000...

Attaching /flash device... done.
Attaching network interface lnPci0... done.
Attaching network interface lo0... done.

Attaching network interface lnPci1... done.
login: co 1 : # Tiara system configuration file (.CFG).
2 : #
3 : # Tiara Networks, Inc. assumes no responsibility for product reliability,
4 : # performance, or both if the user modifies the .CFG file. Full
5 : # responsibility for any modification made to the .CFG file, by
6 : # the user, is assumed by the user.
7 : #
8 : # Version: r4.0.3
9 : # File Created: 07/21/2002-09:41:18
10 :
11 :
12 : qos
13 : exit qos
14 : module t1 1
15 : alarms
16 : thresholds
17 exit thresholds
18 : exit alarms
19 : linemode
20 : exit linemode
21 : exit t1
22 : module t1 2
23 : alarms
24 : thresholds
25 exit thresholds
26 : exit alarms
27 : linemode
28 : exit linemode
29 : exit t1
30 : module t1 3
31 : alarms
32 : thresholds
33 exit thresholds
34 : exit alarms
35 : linemode
36 : exit linemode
37 : exit t1
38 : module t1 4
39 : alarms
40 : thresholds
41 exit thresholds
42 : exit alarms
43 : linemode
44 : exit linemode
45 : exit t1
46 : module t1 5
47 : alarms
48 : thresholds
49 exit thresholds
50 : exit alarms
51 : linemode
52 : exit linemode
53 : exit t1
54 : module t1 6
55 : alarms
56 : thresholds
57 exit thresholds
58 : exit alarms
59 : linemode
60 : exit linemode
61 : exit t1
62 : module t1 7
63 : alarms
64 : thresholds
65 exit thresholds
66 : exit alarms
67 : linemode
68 : exit linemode
69 : exit t1
70 : module t1 8
71 : alarms
72 : thresholds
73 exit thresholds
74 : exit alarms
75 : linemode
76 : exit linemode
77 : exit t1
78 : module t1 9
79 : alarms
80 : thresholds
81 exit thresholds
82 : exit alarms
83 : linemode
84 : exit linemode
85 : exit t1
86 : module t1 10
87 : alarms
88 : thresholds
89 exit thresholds
90 : exit alarms
91 : linemode
92 : exit linemode
93 : exit t1
94 : module t1 11
95 : alarms
96 : thresholds
97 exit thresholds
98 : exit alarms
99 : linemode
100 : exit linemode
101 : exit t1
102 : module t1 12
103 : alarms
104 : thresholds
105 exit thresholds
106 : exit alarms
107 : linemode
108 : exit linemode
109 : exit t1
110 : module t1 13
111 : alarms
112 : thresholds
113 exit thresholds
114 : exit alarms
115 : linemode
116 : exit linemode
117 : exit t1
118 : module t1 14
119 : alarms
120 : thresholds
121 exit thresholds
122 : exit alarms
123 : linemode
124 : exit linemode
125 : exit t1
126 : module t1 15
127 : alarms
128 : thresholds
129 exit thresholds
130 : exit alarms
131 : linemode
132 : exit linemode
133 : exit t1
134 : module t1 16
135 : alarms
136 : thresholds
137 exit thresholds
138 : exit alarms
139 : linemode
140 : exit linemode
141 : exit t1
142 : autoconf
143 : interface ethernet 0
144 : speed 100 full_duplex
ethernet 0: speed configured to 100, mode configured to full_duplex
145 : ip address 64.91.88.126 255.255.255.252
ethernet 0: ip address configured
146 : icmp
147 : exit icmp
148 : exit ethernet
149 : interface ethernet 1
150 : no ip address 172.16.0.1 255.255.0.0
ip address for ethernet 1 unconfigured
151 : icmp
152 : exit icmp
153 : shutdown
Ethernet 1 is shutdown
154 : exit ethernet
155 : interface bundle PelCySpt
configuring new : link t1 1
157 : link t1 2
158 : link t1 3
159 : link t1 4
160 : link t1 5
161 : link t1 6
162 : link t1 7
163 : description "Pell City to Shreveport"
bundle PelCySpt: description set to Pell City to Shreveport
164 : encapsulation ppp
165 : ipmux unnumbered ethernet0
166 : ipmux source_forwarding 64.91.88.125 secondary 0.0.0.0
Source forwarding entry added.

ipmux routes for packets received from this bundle.
167 : red
RED enabled for bundle PelCySpt
168 : tx_min_thresh 40
Min threshold set to 40 for bundle PelCySpt
For better results set max threshold to atleast twice min threshold (>= 80)
169 : tx_max_thresh 90
Max threshold set to 90 for bundle PelCySpt
170 : wq_bias_factor 5
Bias Factor set to 5 for bundle PelCySpt
171 : exit red
172 : icmp
173 : exit icmp
174 : qos
175 : exit qos
176 : exit bundle
177 : ipmux route 64.91.88.117 255.255.255.255 PelCySpt
178 : ipmux route 0.0.0.0 0.0.0.0 64.91.88.125
179 : ip
180 : exit ip
181 : snmp
182 : system_id ti.pell
183 : enable_trap
184 : exit enable_trap
185 : exit snmp
186 : hostname ti.pell
187 : telnet_banner
188 : exit telnet_banner
189 : event
190 : exit event
191 : system logging
192 : syslog
193 : exit syslog
194 : exit logging
195 :
196 :

In system.cfg, Total commands executed: 103, Total errors: 0