This is a lot of 2 New Open Box Cisco 2610 Routers. These came configured from Cisco with some other cards that we already sold. So that is way these were opened box. The boxes have matching serial numbers to the 2610 chassis inside. The 2610 has a WIC-1DSU-T1 card installed. The router has 16 Flash and 48 Dram Memory config. These are new so there shouldn't be any problems but just in caseI will include a 30 Day warranty, Let me know ifyou have any questions.

I booted this up and here is the boot up: ( this is from one of the new open box units the all should be close to the same)

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 49152 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0x719390
Self decompressing the image : Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, 170 West Tasman San Jose, California 95134-1706

Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.1(2), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 10-May-00 01:02 by linda
Image text-base: 0x80008088, data-base: 0x80C840E0

cisco 2610 (MPC860) processor (revision 0x203) with 39936K/9216K bytes of memor.
Processor board ID JAD04525P7Z (1828049549)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: